The header of the FITS file is listed below,
followed by a sample of values (limited to 1000 lines).
#--- sp/PLup3_4U.fit
#ext xtension bpx (dim) x2880 extname
#-------------------------------------------------------------------------------
#000 main -32 (24501) 53b [Wavelength=545/1035(0.02)angstroms]
#-------------------------------------------------------------------------------
SIMPLE = T / Fits standard
BITPIX = -32 / Bits per pixel
NAXIS = 1 / Number of axes
NAXIS1 = 24501 / Axis length
EXTEND = T / File may contain extensions
ORIGIN = 'NOAO-IRAF FITS Image Kernel July 2003' / FITS file originator
IRAF-TLM= '2013-01-17T10:24:54' / Time of last modification
COMMENT NOST 100-2.0: Hanisch,R. et al. 2001, Astron. & Astrophys. 376, 559
.
CRPIX1 = 1. / Reference pixel
CRVAL1 = 545. / Coordinate at reference pixel
CDELT1 = 0.02 / Coord. incr. per pixel (original value)
CTYPE1 = 'LINEAR ' / Units of coordinate
BUNIT = ' ' / Units of data values
.
DATE = '2012-06-18T15:54:37' / [UTC] Date of writing
FILENAME= 'flux_Par_Lup3_4_NOD.bdf' / Original file base-name
MIDASFTP= 'IMAGE ' / MIDAS File Type
.
OBJECT = 'Par-Lup3-4' / MIDAS desc.: IDENT(1)
RA = 242.215225 / MIDAS desc.: O_POS(1)
DEC = -39.09205 / MIDAS desc.: O_POS(2)
EQUINOX = 2000. / MIDAS desc.: O_POS(3)
DATE-OBS= '2010-04-07' / MIDAS desc.: O_TIME(1)
MJD-OBS = 55293.17624885 / MIDAS desc.: O_TIME(4)
TM-START= 15227.90064022 / MIDAS desc.: O_TIME(5)
EXPTIME = 900. / MIDAS desc.: O_TIME(7)
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
TELESCOP= 'ESO-VLT-U2' / MIDAS desc.: TELESCOP(1)
INSTRUME= 'XSHOOTER' / MIDAS desc.: INSTRUME(1)
RADECSYS= 'FK5 ' / MIDAS desc.: RADECSYS(1)
OBSERVER= 'UNKNOWN ' / MIDAS desc.: OBSERVER(1)
HISTORY Converted from: PROD_SCI_SLIT_NOD_MERGE_1D_VIS.fits \
HISTORY EXTRACT/IMAG Par_Lup3_4_NOD = t [545:1035] \
HISTORY COMPUTE/IMAG tmp = Par_Lup3_4_NOD*EXP10(0.4*middumex*\
HISTORY 1.43700E+00) COMPUTE/IMAG flux_Par_Lup3_4_NOD = tmp / r_l\
HISTORY tt3218_reb COMPUTE/IMAG flux_Par_Lup3_4_NOD = \
HISTORY flux_Par_Lup3_4_NOD/9.00000E+02 COMPUTE/IMAG flux_Par_Lup3\
HISTORY _4_NOD = flux_Par_Lup3_4_NOD / 1.0e+16
UTC = 15223. / 04:13:43.000 UTC at start (sec)
LST = 45206.86 / 12:33:26.860 LST at start (sec)
PI-COI = 'UNKNOWN ' / PI-COI name.
CHECKSUM= 'YQGOaO9NSOENYO9N' / HDU checksum updated 2010-04-07T04:31:24
DATASUM = '48808391' / data unit checksum updated 2010-04-07T04:31:24
DATAMD5 = 'e14d570991bdbd676768f8e8bb2f7623' / MD5 checksum
PIPEFILE= 'PROD_SCI_SLIT_NOD_MERGE_1D_VIS.fits' / Filename of data product
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.11' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 4833 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 200201154 / Observation block ID
HIERARCH ESO OBS NAME = 'Par-Lup3-4' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 70606 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '085.C-0238(A)' / ESO program identification
HIERARCH ESO OBS START = '2010-04-07T04:07:31' / OB start time
HIERARCH ESO OBS TARG NAME = 'Par-Lup3-4' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 3 / Exposure number within template
HIERARCH ESO TPL ID = 'XSHOOTER_slt_obs_AutoNodOnSlit' / Template signa
HIERARCH ESO TPL NAME = 'XSHOOTER observations with AutoNodOnSlit offset'
HIERARCH ESO TPL NEXP = 13 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ= 'XSHOOTER_obs_AutoNodOnSlit.seq' / Sequencer scri
HIERARCH ESO TPL START = '2010-04-07T04:13:07' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 1.71 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.399 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.475 / Airmass at start
HIERARCH ESO TEL ALT = 42.63 / Alt angle at start (deg)
HIERARCH ESO TEL AMBI FWHM END = 0.71 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START = 0.9 / Observatory Seeing queried
HIERARCH ESO TEL AMBI PRES END = 744.88 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START = 744.93 / Observatory ambient air pr
HIERARCH ESO TEL AMBI RHUM = 14. / Observatory ambient relative humi
HIERARCH ESO TEL AMBI TAU0 = 0.015699 / Average coherence time
HIERARCH ESO TEL AMBI TEMP = 17.27 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR = 312. / Observatory ambient wind directio
HIERARCH ESO TEL AMBI WINDSP = 2.92 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 301.427 / Az angle at start (deg) S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.557 / Focal length (m)
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale (arcsec/mm)
HIERARCH ESO TEL FOCU VALUE = 0.191 / M2 setting (mm)
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT= -24.6272 / Tel geo latitute (+=North) (deg)
HIERARCH ESO TEL GEOLON= -70.4048 / Tel geo longitude (+=East) (deg)
HIERARCH ESO TEL ID = 'v 3.29+ ' / TCS version number
HIERARCH ESO TEL MOON DEC = -19.76005 / -19:45:36.1 DEC (J2000) (deg)
HIERARCH ESO TEL MOON RA = 298.370257 / 19:53:28.8 RA (J2000) (deg)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = -86.431 / Parallactic angle at end (deg)
HIERARCH ESO TEL PARANG START = -88.933 / Parallactic angle at start (deg)
HIERARCH ESO TEL TARG ALPHA = 160851.43 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = -390530.4 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Ju
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 15.5 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO INS ADC1 DEC = -390710.33801 / Telescope desclination [deg].
HIERARCH ESO INS ADC1 END = 5.292 / Position angle at end [deg].
HIERARCH ESO INS ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 160935.438347 / Telescope right ascension [deg]
HIERARCH ESO INS ADC2 DEC = -390710.33801 / Telescope desclination [deg].
HIERARCH ESO INS ADC2 END = 74.8948 / Position angle at end [deg].
HIERARCH ESO INS ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 160935.438347 / Telescope right ascension [deg]
HIERARCH ESO INS ADC3 DEC = -390710.33801 / Telescope desclination [deg].
HIERARCH ESO INS ADC3 ENCSTART = 587 / ADC encoder value at exposure star
HIERARCH ESO INS ADC3 END = 3.851 / Position angle at end [deg].
HIERARCH ESO INS ADC3 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC3 RA = 160935.438347 / Telescope right ascension [deg]
HIERARCH ESO INS ADC4 DEC = -390710.33801 / Telescope desclination [deg].
HIERARCH ESO INS ADC4 ENCSTART = 14367 / ADC encoder value at exposure star
HIERARCH ESO INS ADC4 END = 64.9727 / Position angle at end [deg].
HIERARCH ESO INS ADC4 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC4 RA = 160935.438347 / Telescope right ascension [deg]
HIERARCH ESO INS DATE = '2005-04-01' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.XSHOOTER_ICS-0.78' / Data dictionary
HIERARCH ESO INS FILT1 ID = 'PS11 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'I ' / Filter name.
HIERARCH ESO INS FILT1 NO = 11 / Filter wheel position index.
HIERARCH ESO INS FOCU1 ENC = 27218 / Absolute position [Enc].
HIERARCH ESO INS FOCU1 POS = 16.9 / Position [C].
HIERARCH ESO INS FOCU2 ENC = 11750 / Absolute position [Enc].
HIERARCH ESO INS FOCU2 POS = 0. / Position [C].
HIERARCH ESO INS ID = 'XSHOOTER/1.57' / Instrument ID.
HIERARCH ESO INS MIRR1 ID = 'Tel ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'Tel ' / Mirror name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS MODE = 'SLITSPEC' / Instrument mode used.
HIERARCH ESO INS OPTI2 ID = 'SLOT ' / OPTIi unique ID.
HIERARCH ESO INS OPTI2 NAME = 'SLOT ' / OPTIi name.
HIERARCH ESO INS OPTI2 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI2 TYPE = 'MIRROR ' / OPTIi element.
HIERARCH ESO INS OPTI3 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI3 NAME = '1.0x11 ' / OPTIi name.
HIERARCH ESO INS OPTI3 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI3 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI4 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI4 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI4 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI4 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI5 ID = 'PS3 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI5 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI5 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI5 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS PATH = 'SLITSPEC' / Optical path used.
HIERARCH ESO INS SENS21 ID = 'CA1F1 ' / sensor ID.
HIERARCH ESO INS SENS21 NAME = 'Cab.1 Flow rate' / sensor common name.
HIERARCH ESO INS SENS21 VAL = 91. / Cab. 1 Flow rate [l/h]
HIERARCH ESO INS SENS60 ID = 'NPM ' / sensor ID.
HIERARCH ESO INS SENS60 NAME = 'NIR cryo. P' / sensor common name.
HIERARCH ESO INS SENS60 VAL = 2.81E-06 / NIR Pressure [mbar]
HIERARCH ESO INS SENS81 ID = 'RANGE ' / sensor ID.
HIERARCH ESO INS SENS81 NAME = 'Heater Range' / sensor common name.
HIERARCH ESO INS SENS81 VAL = 9999. / Lake 340 Heater Range
HIERARCH ESO INS SENS82 ID = 'HEATR ' / sensor ID.
HIERARCH ESO INS SENS82 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS SENS82 VAL = 9999. / Lake 340 Heater output
HIERARCH ESO INS SENSOR7 SWSIM = T / If T, function is software simulat
HIERARCH ESO INS SHUT1 ID = 'INSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Instrument shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP1 ID = 'TMUC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'UVB Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 16.95 / UVB Camera temp. [C]
HIERARCH ESO INS TEMP10 ID = 'TMA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP10 NAME = 'Ambient temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP10 VAL = 17.51 / Ambient temp. [C]
HIERARCH ESO INS TEMP11 ID = 'TMADC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'BB UVB ADC temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 18.19 / BB UVB ADC temp. [C]
HIERARCH ESO INS TEMP2 ID = 'TMUP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'UVB Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 16.48 / UVB Prism temp. [C]
HIERARCH ESO INS TEMP21 ID = 'CA1OT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP21 NAME = 'Cab.1 outlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP21 VAL = 13.67 / Cab. 1 outlet temp. [C]
HIERARCH ESO INS TEMP22 ID = 'CA1IT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP22 NAME = 'Cab.1 inlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP22 VAL = 10.93 / Cab. 1 inlet temp. [C]
HIERARCH ESO INS TEMP23 ID = 'CA1CT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP23 NAME = 'Cab.1 temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP23 VAL = 20.54 / Cab. 1 temp. [C]
HIERARCH ESO INS TEMP24 ID = 'CA1AT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP24 NAME = 'Cab.1 Amb. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP24 VAL = 18.22 / Cab. 1 Amb. temp. [C]
HIERARCH ESO INS TEMP3 ID = 'TMUB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'UVB bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 17.08 / UVB bench temp. [C]
HIERARCH ESO INS TEMP4 ID = 'TMVC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'VIS Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 15.93 / VIS Camera temp. [C]
HIERARCH ESO INS TEMP5 ID = 'TMVP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP5 NAME = 'VIS Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP5 VAL = 16.22 / VIS Prism temp. [C]
HIERARCH ESO INS TEMP6 ID = 'TMVB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP6 NAME = 'VIS bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP6 VAL = 16.57 / VIS bench temp. [C]
HIERARCH ESO INS TEMP7 ID = 'TMUCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP7 NAME = 'UVB cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP7 VAL = 15.67 / UVB cryo. temp. [C]
HIERARCH ESO INS TEMP8 ID = 'TMVCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP8 NAME = 'VIS cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP8 VAL = 14.68 / VIS cryo. temp. [C]
HIERARCH ESO INS TEMP80 ID = 'OBCT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP80 NAME = 'OB Cover Tel.' / Temperature sensor name.
HIERARCH ESO INS TEMP80 VAL = 104.13 / OB Cover Telescope [K]
HIERARCH ESO INS TEMP81 ID = 'OBCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP81 NAME = 'OB Cover Tank' / Temperature sensor name.
HIERARCH ESO INS TEMP81 VAL = 104.25 / OB Cover Tank [K]
HIERARCH ESO INS TEMP82 ID = 'OBPR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP82 NAME = 'OB Prism1' / Temperature sensor name.
HIERARCH ESO INS TEMP82 VAL = 103.33 / OB Prism1 [K]
HIERARCH ESO INS TEMP83 ID = 'OBCL ' / Temperature sensor ID.
HIERARCH ESO INS TEMP83 NAME = 'OB Corrector Lens' / Temperature sensor name.
HIERARCH ESO INS TEMP83 VAL = 104.35 / OB Corrector Lens [K]
HIERARCH ESO INS TEMP84 ID = 'CP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP84 NAME = 'Cryo. Cold Plate' / Temperature sensor name.
HIERARCH ESO INS TEMP84 VAL = 82.945 / Cryostat Cold Plate [K]
HIERARCH ESO INS TEMP85 ID = 'RS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP85 NAME = 'Cryo. rad. shield' / Temperature sensor name.
HIERARCH ESO INS TEMP85 VAL = 94.538 / Cryostat rad. shield [K]
HIERARCH ESO INS TEMP86 ID = 'DCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP86 NAME = 'CCD Copper bar' / Temperature sensor name.
HIERARCH ESO INS TEMP86 VAL = 76.657 / CCD Copper bar [K]
HIERARCH ESO INS TEMP9 ID = 'TMNCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP9 NAME = 'NIR cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP9 VAL = 18.06 / NIR cryo. temp. [C]
HIERARCH ESO INS TEMP90 ID = 'NHT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP90 NAME = 'NIR Head temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP90 VAL = 9999. / NIR Head temp. [K]
HIERARCH ESO INS TILT1 AFCX = 0.102 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT1 AFCY = -0.021 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT1 CONVX = 0.208 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT1 CONVY = 0.269 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT1 ENGX = 6.235 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT1 ENGY = 6.162 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT1 ID = 'afcs1 ' / AFCS ID.
HIERARCH ESO INS TILT1 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT1 NAME = 'Flexure comp. UVB' / AFCS description.
HIERARCH ESO INS TILT1 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT1 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT1 POSXEND = 1.227 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSXSTART = 1.421 / Piezo position at start in
HIERARCH ESO INS TILT1 POSYEND = 1.153 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSYSTART = 1.236 / Piezo position at start in
HIERARCH ESO INS TILT1 REFRACXEND = 1.609 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT1 REFRACXST = 1.637 / Atm. refr. corr. start in
HIERARCH ESO INS TILT1 REFRACYEND = 1.658 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT1 REFRACYST = 1.669 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 AFCX = -0.226 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT2 AFCY = 0.338 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT2 CONVX = 0.291 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT2 CONVY = 0.384 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT2 ENGX = 3.862 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT2 ENGY = 4.314 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT2 ID = 'afcs2 ' / AFCS ID.
HIERARCH ESO INS TILT2 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT2 NAME = 'Flexure comp. VIS' / AFCS description.
HIERARCH ESO INS TILT2 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT2 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT2 POSXEND = -1.145 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSXSTART = -1.302 / Piezo position at start in
HIERARCH ESO INS TILT2 POSYEND = -0.691 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSYSTART = -0.764 / Piezo position at start in
HIERARCH ESO INS TILT2 REFRACXEND = -1.646 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT2 REFRACXST = -1.672 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 REFRACYEND = -1.698 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT2 REFRACYST = -1.712 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 AFCX = 0.325 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT3 AFCY = 0.396 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT3 CONVX = 0.58 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT3 CONVY = 0.56 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT3 ENGX = 4.041 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT3 ENGY = 6.406 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT3 ID = 'afcs3 ' / AFCS ID.
HIERARCH ESO INS TILT3 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT3 NAME = 'Flexure comp. NIR' / AFCS description.
HIERARCH ESO INS TILT3 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT3 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT3 POSXEND = -0.966 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSXSTART = -1.057 / Piezo position at start in
HIERARCH ESO INS TILT3 POSYEND = 1.391 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSYSTART = 1.562 / Piezo position at start in
HIERARCH ESO INS TILT3 REFRACXEND = -1.765 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT3 REFRACXST = -1.789 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 REFRACYEND = -1.814 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT3 REFRACYST = -1.827 / Atm. refr. corr. start in
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET CHIP1 DATE = '2005-04-22' / Date of installation [YYYY-MM-DD
HIERARCH ESO DET CHIP1 ID = 'Catherine' / Detector chip identification
HIERARCH ESO DET CHIP1 INDEX = 1 / Chip index
HIERARCH ESO DET CHIP1 NAME = 'MIT/LL CCID-20' / Detector chip name
HIERARCH ESO DET CHIP1 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP1 NY = 4102 / # of pixels along Y
HIERARCH ESO DET CHIP1 PSZX = 15. / Size of pixel in X
HIERARCH ESO DET CHIP1 PSZY = 15. / Size of pixel in Y
HIERARCH ESO DET CHIP1 X = 1 / X location in array
HIERARCH ESO DET CHIP1 XGAP = 0. / Gap between chips along x
HIERARCH ESO DET CHIP1 Y = 1 / Y location in array
HIERARCH ESO DET CHIP1 YGAP = 0. / Gap between chips along y
HIERARCH ESO DET CHIPS = 1 / # of chips in detector array
HIERARCH ESO DET DATE = '2005-22-04' / Installation date
HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET EXP NO= 7451 / Unique exposure ID number
HIERARCH ESO DET EXP RDTTIME = 4.023 / image readout time
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP XFERTIM = 152.123 / image transfer time
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.96' / Detector system Id
HIERARCH ESO DET NAME = 'shdetv - shdetv' / Name of detector system
HIERARCH ESO DET OUT1 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT1 CONAD = 0.6 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT1 GAIN = 1.67 / Conversion from electrons to ADU
HIERARCH ESO DET OUT1 ID = 'A ' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 INDEX = 1 / Output index
HIERARCH ESO DET OUT1 NAME = 'A ' / Description of output
HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X
HIERARCH ESO DET OUT1 NY = 4000 / valid pixels along Y
HIERARCH ESO DET OUT1 OVSCX = 48 / Overscan region in X
HIERARCH ESO DET OUT1 OVSCY = 0 / Overscan region in Y
HIERARCH ESO DET OUT1 PRSCX = 10 / Prescan region in X
HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT1 RON = 3.2 / Readout noise per output (e-)
HIERARCH ESO DET OUT1 X= 1 / X location of output
HIERARCH ESO DET OUT1 Y= 1 / Y location of output
HIERARCH ESO DET OUTPUTS = 1 / # of outputs
HIERARCH ESO DET OUTREF= 0 / reference output
HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET READ CLOCK = '100k/1pt/hg' / Readout clock pattern used
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin
HIERARCH ESO DET READ SPEED = '1pt/100k/hg' / Readout speed
HIERARCH ESO DET SHUT ID = 'VA 25mm BistableCCD Sensor1' / Shutter unique
HIERARCH ESO DET SHUT TMCLOS = 0. / Time taken to close shutter
HIERARCH ESO DET SHUT TMOPEN = 0. / Time taken to open shutter
HIERARCH ESO DET SHUT TYPE = 'Iris on Slit' / type of shutter
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET TELE INT = 600. / Interval between two successive te
HIERARCH ESO DET TELE NO = 4 / # of sources active
HIERARCH ESO DET TLM1 END = 135. / Telemetry value at read completion
HIERARCH ESO DET TLM1 ID = 'CCD Sensor1' / ID of telemetry sensor
HIERARCH ESO DET TLM1 NAME = 'CCD T1 ' / Description of telemetry param.
HIERARCH ESO DET TLM1 START = 135. / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 142.9 / Telemetry value at read completion
HIERARCH ESO DET TLM2 ID = 'CCD Sensor2' / ID of telemetry sensor
HIERARCH ESO DET TLM2 NAME = 'CCD T2 ' / Description of telemetry param.
HIERARCH ESO DET TLM2 START = 142.9 / Telemetry value at read start
HIERARCH ESO DET TLM3 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM3 ID = 'Box Temp' / ID of telemetry sensor
HIERARCH ESO DET TLM3 NAME = 'EBOX T ' / Description of telemetry param.
HIERARCH ESO DET TLM3 START = 0. / Telemetry value at read start
HIERARCH ESO DET TLM4 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM4 ID = 'Vacuum ' / ID of telemetry sensor
HIERARCH ESO DET TLM4 NAME = 'Vacuum ' / Description of telemetry param.
HIERARCH ESO DET TLM4 START = 0. / Telemetry value at read start
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 DIT1 = 900.000001 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 900.3681 / Dark current time
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 NX = 2106 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 4000 / # of pixels along Y
HIERARCH ESO DET WIN1 ST = T / If T, window enabled
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 UIT1 = 900. / user defined subintegration time
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO PRO BIAS LEFT MEDIAN = 1108.
HIERARCH ESO PRO BIAS RIGHT MEDIAN = 1110.
HIERARCH ESO PRO BIAS LEFT STDEV = 5.16062120967
HIERARCH ESO PRO BIAS RIGHT STDEV = 5.19511638188
HIERARCH ESO PRO BIAS UP MEDIAN= 0.
HIERARCH ESO PRO BIAS DOWN MEDIAN = 0.
HIERARCH ESO PRO BIAS UP STDEV = 0.
HIERARCH ESO PRO BIAS DOWN STDEV = 0.
HIERARCH ESO PRO CATG = 'SCI_SLIT_NOD_MERGE_1D_VIS' / Category of pipeline prod
HIERARCH ESO PRO B RELOFF RA = -3.830224
HIERARCH ESO PRO B RELOFF DEC = 3.213936
HIERARCH ESO PRO B CUMOFF RA = -1.915112
HIERARCH ESO PRO B CUMOFF DEC = 1.606968
HIERARCH ESO PRO RECT BIN LAMBDA = 0.02
HIERARCH ESO PRO RECT BIN SPACE= 0.159999847412
HIERARCH ESO PRO RECT LAMBDA MIN = 530.18
HIERARCH ESO PRO RECT LAMBDA MAX = 1040.92
HIERARCH ESO PRO RECT SPACE MIN= -10.1800003052
HIERARCH ESO PRO RECT SPACE MAX= 5.5
HIERARCH ESO PRO EXTRACT SLIT MIN = 31.
HIERARCH ESO PRO EXTRACT SLIT MAX = 68.
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE,SLIT,NODDING' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'xsh_scired_slit_nod' / Pipeline recipe (unique
HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.0.1' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'xsh/1.0.0' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME= 'XSHOO.2010-04-07T04_13_47.901.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW2 NAME= 'XSHOO.2010-04-07T04_31_40.113.fits' / File na
HIERARCH ESO PRO REC1 RAW2 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW3 NAME= 'XSHOO.2010-04-07T04_49_25.646.fits' / File na
HIERARCH ESO PRO REC1 RAW3 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW4 NAME= 'XSHOO.2010-04-07T05_07_17.820.fits' / File na
HIERARCH ESO PRO REC1 RAW4 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO DATANCOM = 4 / Number of combined frames
HIERARCH ESO PRO REC1 CAL1 NAME= 'SPECTRAL_FORMAT_TAB_VIS_NEW.fits' / File name
HIERARCH ESO PRO REC1 CAL1 CATG= 'SPECTRAL_FORMAT_TAB_VIS' / Category of calibr
HIERARCH ESO PRO REC1 CAL2 NAME= 'PROD_MASTER_BIAS_VIS_2010-04-06_100k_1x1.fit'
HIERARCH ESO PRO REC1 CAL2 CATG= 'MASTER_BIAS_VIS' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '51e4a6e0d7cdb4d934990b5f20e34922' / MD
HIERARCH ESO PRO REC1 CAL3 NAME= 'PROD_ORDER_TAB_EDGES_SLIT_VIS.fits' / File na
HIERARCH ESO PRO REC1 CAL3 CATG= 'ORDER_TAB_EDGES_SLIT_VIS' / Category of calib
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '537b12ec1ffe5ed395cb8598c0ea598c' / MD
HIERARCH ESO PRO REC1 CAL4 NAME= 'PROD_MASTER_FLAT_SLIT_VIS.fits' / File name o
HIERARCH ESO PRO REC1 CAL4 CATG= 'MASTER_FLAT_SLIT_VIS' / Category of calibrati
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = 'a93d1439ea26bd3ab58fe0fe8e6d8ec0' / MD
HIERARCH ESO PRO REC1 CAL5 NAME= 'PROD_MASTER_BP_MAP_VIS.fits' / File name of c
HIERARCH ESO PRO REC1 CAL5 CATG= 'MASTER_BP_MAP_VIS' / Category of calibration
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = '0966bcac035020a742bb0b1458cc11ac' / MD
HIERARCH ESO PRO REC1 CAL6 NAME= 'PROD_DISP_TAB_AFC_VIS.fits' / File name of ca
HIERARCH ESO PRO REC1 CAL6 CATG= 'DISP_TAB_AFC_VIS' / Category of calibration f
HIERARCH ESO PRO REC1 CAL6 DATAMD5 = 'b20896b23781a1b093a45869265a8086' / MD
HIERARCH ESO PRO REC1 CAL7 NAME= 'PROD_WAVE_TAB_AFC_VIS.fits' / File name of ca
HIERARCH ESO PRO REC1 CAL7 CATG= 'WAVE_TAB_AFC_VIS' / Category of calibration f
HIERARCH ESO PRO REC1 CAL7 DATAMD5 = '2646fd5f881c1940f6263a5aa79bc2b0' / MD
HIERARCH ESO PRO REC1 PARAM1 NAME = 'keep-temp'
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'no '
HIERARCH ESO PRO REC1 PARAM2 NAME = 'debug-level'
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'none '
HIERARCH ESO PRO REC1 PARAM3 NAME = 'test '
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'none '
HIERARCH ESO PRO REC1 PARAM4 NAME = 'time-stamp'
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'false '
HIERARCH ESO PRO REC1 PARAM5 NAME = 'background-nb-y'
HIERARCH ESO PRO REC1 PARAM5 VALUE = '100 '
HIERARCH ESO PRO REC1 PARAM6 NAME = 'background-radius-x'
HIERARCH ESO PRO REC1 PARAM6 VALUE = '2 '
HIERARCH ESO PRO REC1 PARAM7 NAME = 'background-radius-y'
HIERARCH ESO PRO REC1 PARAM7 VALUE = '2 '
HIERARCH ESO PRO REC1 PARAM8 NAME = 'background-min-grid-frac'
HIERARCH ESO PRO REC1 PARAM8 VALUE = '0.3333 '
HIERARCH ESO PRO REC1 PARAM9 NAME = 'background-grid-frac'
HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.5 '
HIERARCH ESO PRO REC1 PARAM10 NAME = 'background-method'
HIERARCH ESO PRO REC1 PARAM10 VALUE = 'poly '
HIERARCH ESO PRO REC1 PARAM11 NAME = 'background-smooth-x'
HIERARCH ESO PRO REC1 PARAM11 VALUE = '-1 '
HIERARCH ESO PRO REC1 PARAM12 NAME = 'background-smooth-y'
HIERARCH ESO PRO REC1 PARAM12 VALUE = '100 '
HIERARCH ESO PRO REC1 PARAM13 NAME = 'background-debug'
HIERARCH ESO PRO REC1 PARAM13 VALUE = 'true '
HIERARCH ESO PRO REC1 PARAM14 NAME = 'removecrhsingle-frac-max'
HIERARCH ESO PRO REC1 PARAM14 VALUE = '0.1 '
HIERARCH ESO PRO REC1 PARAM15 NAME = 'removecrhsingle-sigmalim'
HIERARCH ESO PRO REC1 PARAM15 VALUE = '5 '
HIERARCH ESO PRO REC1 PARAM16 NAME = 'removecrhsingle-flim'
HIERARCH ESO PRO REC1 PARAM16 VALUE = '2 '
HIERARCH ESO PRO REC1 PARAM17 NAME = 'removecrhsingle-niter'
HIERARCH ESO PRO REC1 PARAM17 VALUE = '4 '
HIERARCH ESO PRO REC1 PARAM18 NAME = 'rectify-kernel'
HIERARCH ESO PRO REC1 PARAM18 VALUE = 'default '
HIERARCH ESO PRO REC1 PARAM19 NAME = 'rectify-radius'
HIERARCH ESO PRO REC1 PARAM19 VALUE = '1 '
HIERARCH ESO PRO REC1 PARAM20 NAME = 'rectify-bin-lambda'
HIERARCH ESO PRO REC1 PARAM20 VALUE = '0.02 '
HIERARCH ESO PRO REC1 PARAM21 NAME = 'rectify-bin-slit'
HIERARCH ESO PRO REC1 PARAM21 VALUE = '0.16 '
HIERARCH ESO PRO REC1 PARAM22 NAME = 'rectify-full-slit'
HIERARCH ESO PRO REC1 PARAM22 VALUE = 'true '
HIERARCH ESO PRO REC1 PARAM23 NAME = 'rectify-conserve-flux'
HIERARCH ESO PRO REC1 PARAM23 VALUE = 'false '
HIERARCH ESO PRO REC1 PARAM24 NAME = 'rectify-fast'
HIERARCH ESO PRO REC1 PARAM24 VALUE = 'true '
HIERARCH ESO PRO REC1 PARAM25 NAME = 'localize-method'
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'MANUAL '
HIERARCH ESO PRO REC1 PARAM26 NAME = 'localize-chunk-nb'
HIERARCH ESO PRO REC1 PARAM26 VALUE = '10 '
HIERARCH ESO PRO REC1 PARAM27 NAME = 'localize-thresh'
HIERARCH ESO PRO REC1 PARAM27 VALUE = '0.1 '
HIERARCH ESO PRO REC1 PARAM28 NAME = 'localize-deg-lambda'
HIERARCH ESO PRO REC1 PARAM28 VALUE = '0 '
HIERARCH ESO PRO REC1 PARAM29 NAME = 'localize-slit-position'
HIERARCH ESO PRO REC1 PARAM29 VALUE = '0 '
HIERARCH ESO PRO REC1 PARAM30 NAME = 'localize-slit-hheight'
HIERARCH ESO PRO REC1 PARAM30 VALUE = '0.5 '
HIERARCH ESO PRO REC1 PARAM31 NAME = 'localize-kappa'
HIERARCH ESO PRO REC1 PARAM31 VALUE = '3 '
HIERARCH ESO PRO REC1 PARAM32 NAME = 'localize-niter'
HIERARCH ESO PRO REC1 PARAM32 VALUE = '3 '
HIERARCH ESO PRO REC1 PARAM33 NAME = 'localize-nod-throw'
HIERARCH ESO PRO REC1 PARAM33 VALUE = '0 '
HIERARCH ESO PRO REC1 PARAM34 NAME = 'extract-method'
HIERARCH ESO PRO REC1 PARAM34 VALUE = 'NOD '
HIERARCH ESO PRO REC1 PARAM35 NAME = 'mergeord-method'
HIERARCH ESO PRO REC1 PARAM35 VALUE = '0 '
HIERARCH ESO PRO REC1 PARAM36 NAME = 'combine-nod-min'
HIERARCH ESO PRO REC1 PARAM36 VALUE = '5 '
HIERARCH ESO PRO REC1 PARAM37 NAME = 'combine-nod-clip'
HIERARCH ESO PRO REC1 PARAM37 VALUE = 'true '
HIERARCH ESO PRO REC1 PARAM38 NAME = 'combine-nod-clip-sigma'
HIERARCH ESO PRO REC1 PARAM38 VALUE = '5 '
HIERARCH ESO PRO REC1 PARAM39 NAME = 'combine-nod-clip-niter'
HIERARCH ESO PRO REC1 PARAM39 VALUE = '2 '
HIERARCH ESO PRO REC1 PARAM40 NAME = 'combine-nod-clip-diff'
HIERARCH ESO PRO REC1 PARAM40 VALUE = '0.1 '
HIERARCH ESO PRO REC1 PARAM41 NAME = 'combine-nod-use-localization'
HIERARCH ESO PRO REC1 PARAM41 VALUE = 'false '
HIERARCH ESO PRO REC1 PARAM42 NAME = 'max-slit'
HIERARCH ESO PRO REC1 PARAM42 VALUE = '5.7 '
HIERARCH ESO PRO REC1 PARAM43 NAME = 'min-slit'
HIERARCH ESO PRO REC1 PARAM43 VALUE = '-5.3 '
HIERARCH ESO PRO REC1 PARAM44 NAME = 'crh-clip-kappa'
HIERARCH ESO PRO REC1 PARAM44 VALUE = '5 '
HIERARCH ESO PRO REC1 PARAM45 NAME = 'crh-clip-niter'
HIERARCH ESO PRO REC1 PARAM45 VALUE = '5 '
HIERARCH ESO PRO REC1 PARAM46 NAME = 'crh-clip-frac'
HIERARCH ESO PRO REC1 PARAM46 VALUE = '0.7 '
HIERARCH ESO PRO REC1 PARAM47 NAME = 'compute-map'
HIERARCH ESO PRO REC1 PARAM47 VALUE = 'true '
HIERARCH ESO PRO REC1 PARAM48 NAME = 'do-flatfield'
HIERARCH ESO PRO REC1 PARAM48 VALUE = 'true '
HIERARCH ESO ADA ABSROT END = -48.9865 / Abs rot angle at exp end (deg)
HIERARCH ESO ADA ABSROT PPOS = 'NEG ' / sign of probe position
HIERARCH ESO ADA ABSROT START = -51.48678 / Abs rot angle at exp start (deg)
HIERARCH ESO ADA GUID DEC = -39.02293 / -39:01:22.5 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 242.207099 / 16:08:49.7 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG= -130. / Position angle at start
HIERARCH ESO OCS DET2 IMGNAME = 'XSHOOTER_SLT_OBJ_VIS_' / Data File Name.
HIERARCH ESO SEQ ARM = 'VIS ' / Instrument Arm
HIERARCH ESO SEQ CUMOFF DEC = -1.606968 / Cumulative DEC offset
HIERARCH ESO SEQ CUMOFF RA = 1.915112 / Cumulative RA offset
HIERARCH ESO SEQ CUMOFF X = 0. / Cumulative offset X (along the sli
HIERARCH ESO SEQ CUMOFF Y = 2.5 / Cumulative offset Y (along the sli
HIERARCH ESO SEQ JITTER WIDTH = 0. / Width of the Jitter box (arcsec)
HIERARCH ESO SEQ NOD THROW = 5. / Nodding throw length in arcsec
HIERARCH ESO SEQ RELOFF DEC = -1.606968 / List of DEC offsets
HIERARCH ESO SEQ RELOFF RA = 1.915112 / List of RA offsets
HIERARCH ESO QC NPIXSAT= 16.
HIERARCH ESO QC FPIXSAT= 1.953125E-06
HIERARCH ESO QC CRRATE = 0.239378375772
HIERARCH ESO QC NCRH = 3971
HIERARCH ESO QC NCRH AVG = 3971
HIERARCH ESO QC FLUX1 VAL = 318.424724636 / Flux in 672- 680 nm
HIERARCH ESO QC FLUX1 ERR = 44.2166326141 / Error Flux in 672- 680 nm
HIERARCH ESO QC FLUX1 SN = 7.20146935238 / Signal to noise ratio in 672-
HIERARCH ESO QC FLUX2 VAL = 712.244090576 / Flux in 745- 756 nm
HIERARCH ESO QC FLUX2 ERR = 49.0041713992 / Error Flux in 745- 756 nm
HIERARCH ESO QC FLUX2 SN = 14.5343563668 / Signal to noise ratio in 745-
HIERARCH ESO QC FLUX3 VAL = 720.842030204 / Flux in 992- 999 nm
HIERARCH ESO QC FLUX3 ERR = 67.1770692989 / Error Flux in 992- 999 nm
HIERARCH ESO QC FLUX3 SN = 10.7304774937 / Signal to noise ratio in 992-
.
HISTORY ESO-DESCRIPTORS START ................
HISTORY 'LHCUTS','R*4',1,4,'5E14.7'
HISTORY 0.0000000E+00 0.0000000E+00-3.5866072E-14 1.0975095E-13
HISTORY
HISTORY ESO-DESCRIPTORS END ................
APNUM1 = '1 1 '
DC-FLAG = 0
WCSDIM = 1
CD1_1 = 0.02
LTM1_1 = 1.
WAT0_001= 'system=equispec'
WAT1_001= 'wtype=linear label=Wavelength units=angstroms units_display=angstrom'
WAT1_002= 's '
.
.
.
.
END
END