Summary of FITS file J/A+A/561/A2/sp/Sz71_*.fit:
--- sp/Sz71_N.fit ⇩Download⇩ file
ext xtension bpx (dim) x2880 extname
000 main -32 (24750) 57b [LINEAR=994.02/2478.96(0.06)]
--- sp/Sz71_U.fit ⇩Download⇩ file
ext xtension bpx (dim) x2880 extname
000 main -32 (14554) 41b [LINEAR=298.92/589.98(0.02)]
--- sp/Sz71_V.fit ⇩Download⇩ file
ext xtension bpx (dim) x2880 extname
000 main -32 (24317) 53b [Wavelength=533.66/1019.98(0.02)angstroms]
=== sp/Sz71_*.fit ⇩Download⇩ as a tar file
The header of the FITS file is listed below,
followed by a sample of values (limited to 1000 lines).
|
#--- sp/Sz71_N.fit
#ext xtension bpx (dim) x2880 extname
#-------------------------------------------------------------------------------
#000 main -32 (24750) 57b [LINEAR=994.02/2478.96(0.06)]
#-------------------------------------------------------------------------------
SIMPLE = T / Standard FITS format: NOST 100-2.0
BITPIX = -32 / No. of bits per pixel
NAXIS = 1 / No. of axes in image
NAXIS1 = 24750 / No. of pixels
EXTEND = T / FITS extension may be present
BLOCKED = T / FITS file may be blocked
COMMENT NOST 100-2.0: Hanisch,R. et al. 2001, Astron. & Astrophys. 376, 559
.
CRPIX1 = 1. / Reference pixel
CRVAL1 = 994.02 / Coordinate at reference pixel
CDELT1 = 0.06 / Coord. incr. per pixel (original value)
CTYPE1 = 'LINEAR ' / Units of coordinate
BUNIT = ' ' / Units of data values
DATAMAX = 2.96612371166E-13 / Maximum data value
DATAMIN = 1.17549435082E-38 / Minimum data value
.
ORIGIN = 'ESO-MIDAS' / Written by MIDAS
DATE = '2012-07-16T08:57:53' / [UTC] Date of writing
FILENAME= 'flux_Sz71_NIR_corr_phot.fits' / Original file base-name
MIDASFTP= 'IMAGE ' / MIDAS File Type
.
OBJECT = 'Sz71 ' / MIDAS desc.: IDENT(1)
RA = 236.685665 / MIDAS desc.: O_POS(1)
DEC = -34.51045 / MIDAS desc.: O_POS(2)
EQUINOX = 2000. / MIDAS desc.: O_POS(3)
DATE-OBS= '2012-04-18' / MIDAS desc.: O_TIME(1)
MJD-OBS = 56035.09489966 / MIDAS desc.: O_TIME(4)
TM-START= 8199.330623844 / MIDAS desc.: O_TIME(5)
EXPTIME = 100. / MIDAS desc.: O_TIME(7)
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astron
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..35
COMMENT ITS (Flexible Image Transport System) format is defined in 'Astro
COMMENT nd Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..3
COMMENT TS (Flexible Image Transport System) format is defined in 'Astr
COMMENT d Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..
COMMENT S (Flexible Image Transport System) format is defined in 'Ast
COMMENT Astrophysics', volume 376, page 359; bibcode: 2001A&A...376.
COMMENT (Flexible Image Transport System) format is defined in 'As
COMMENT strophysics', volume 376, page 359; bibcode: 2001A&A...376
COMMENT Flexible Image Transport System) format is defined in 'A
COMMENT trophysics', volume 376, page 359; bibcode: 2001A&A...37
COMMENT lexible Image Transport System) format is defined in '
COMMENT rophysics', volume 376, page 359; bibcode: 2001A&A...3
COMMENT exible Image Transport System) format is defined in
COMMENT ophysics', volume 376, page 359; bibcode: 2001A&A...
COMMENT xible Image Transport System) format is defined i
COMMENT physics', volume 376, page 359; bibcode: 2001A&A..
COMMENT ible Image Transport System) format is defined
COMMENT hysics', volume 376, page 359; bibcode: 2001A&A.
COMMENT ble Image Transport System) format is define
COMMENT ysics', volume 376, page 359; bibcode: 2001A&A
COMMENT le Image Transport System) format is defin
COMMENT sics', volume 376, page 359; bibcode: 2001A&
COMMENT e Image Transport System) format is defi
COMMENT ics', volume 376, page 359; bibcode: 2001A
COMMENT Image Transport System) format is def
COMMENT cs', volume 376, page 359; bibcode: 2001
COMMENT mage Transport System) format is de
COMMENT s', volume 376, page 359; bibcode: 200
TELESCOP= 'ESO-VLT-U2' / MIDAS desc.: TELESCOP(1)
INSTRUME= 'XSHOOTER' / MIDAS desc.: INSTRUME(1)
RADECSYS= 'FK5 ' / MIDAS desc.: RADECSYS(1)
OBSERVER= 'UNKNOWN ' / MIDAS desc.: OBSERVER(1)
IRAF-TLM= '2012-07-10T13:44:08' / Time of last modification
UTC = 8196. / 02:16:36.000 UTC at start
LST = 40884.106 / 11:21:24.106 LST at start
PI-COI = 'UNKNOWN ' / PI-COI name.
CHECKSUM= '53Ba729Y52Aa527W' / HDU checksum updated 2012-04-18T02:21:50
DATASUM = '2592313774' / data unit checksum updated 2012-04-18T02:21:50
DATAMD5 = '900610a38ccce85632ad50108ca9a2d9' / MD5 checksum
PIPEFILE= 'SCI_SLIT_MERGE1D_NIR.fits' / Filename of data product
APNUM1 = '1 1 '
DC-FLAG = 0
WCSDIM = 1
CD1_1 = 0.06
LTM1_1 = 1.
WAT0_001= 'system=equispec'
WAT1_002= 's '
HIERARCH ESO OBS AIRM = 5. / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 2. / Req. max. seeing
HIERARCH ESO OBS AMBI TRANS = '2CLR ' / Req. sky transparency
HIERARCH ESO OBS ATM = 'NATM ' / Req. Atmospheric Turbulence Model
HIERARCH ESO OBS CONTAINER ID = -999 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE= 'U ' / Scheduling container type
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.12' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 1292 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 200230036 / Observation block ID
HIERARCH ESO OBS MOON DIST = 30 / Req. min. angular dist. from moon
HIERARCH ESO OBS MOON FLI = 1. / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'Sz71 ' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 0 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '089.C-0143(A)' / ESO program identification
HIERARCH ESO OBS START = '2012-04-18T02:10:58' / OB start time
HIERARCH ESO OBS STREHLRATIO = 0. / Req. strehl ratio
HIERARCH ESO OBS TARG NAME = 'Sz71 ' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TWILIGHT = 0 / Req. twilight
HIERARCH ESO OBS WATERVAPOUR = 0. / Req. water vapour
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 3 / Exposure number within template
HIERARCH ESO TPL ID = 'XSHOOTER_slt_obs_AutoNodOnSlit' / Template signa
HIERARCH ESO TPL NAME = 'XSHOOTER observations with AutoNodOnSlit offset'
HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ= 'XSHOOTER_obs_AutoNodOnSlit.seq' / Sequencer scri
HIERARCH ESO TPL START = '2012-04-18T02:16:00' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 213208 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.814 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.866 / Airmass at start
HIERARCH ESO TEL ALT = 32.317 / Alt angle at start
HIERARCH ESO TEL AMBI FWHM END = 0.57 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START = 0.65 / Observatory Seeing queried
HIERARCH ESO TEL AMBI PRES END = 745.27 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START = 745.3 / Observatory ambient air pr
HIERARCH ESO TEL AMBI RHUM = 21. / Observatory ambient relative humid
HIERARCH ESO TEL AMBI TAU0 = 0.0052 / Average coherence time
HIERARCH ESO TEL AMBI TEMP = 13.32 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR = 28.5 / Observatory ambient wind direction
HIERARCH ESO TEL AMBI WINDSP = 6.83 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 296.632 / Az angle at start S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.557 / Focal length
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale
HIERARCH ESO TEL FOCU VALUE = 0.596 / M2 setting
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT= -24.6272 / Tel geo latitute (+=North)
HIERARCH ESO TEL GEOLON= -70.4048 / Tel geo longitude (+=East)
HIERARCH ESO TEL IA FWHM = 0.61 / Delivered seeing corrected by airm
HIERARCH ESO TEL IA FWHMLIN = 0.73 / Delivered seeing on IA detector (l
HIERARCH ESO TEL IA FWHMLINOBS = 1.04 / Delivered seeing on IA detector (l
HIERARCH ESO TEL ID = 'v 4.4 ' / TCS version number
HIERARCH ESO TEL MOON DEC = 2.12228 / 02:07:20.2 DEC (J2000)
HIERARCH ESO TEL MOON RA = 351.632843 / 23:26:31.8 RA (J2000)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = -98.761 / Parallactic angle at end
HIERARCH ESO TEL PARANG START = -99.386 / Parallactic angle at start
HIERARCH ESO TEL TARG ALPHA = 154644.73 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = -343035.5 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Ju
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 12.28 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO INS ADC1 DEC = -343254.24859 / Telescope desclination [deg].
HIERARCH ESO INS ADC1 END = 121.777 / Position angle at end [deg].
HIERARCH ESO INS ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 154734.403705 / Telescope right ascension [deg]
HIERARCH ESO INS ADC2 DEC = -343254.24859 / Telescope desclination [deg].
HIERARCH ESO INS ADC2 END = 243.85 / Position angle at end [deg].
HIERARCH ESO INS ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 154734.403705 / Telescope right ascension [deg]
HIERARCH ESO INS ADC3 DEC = -343254.24859 / Telescope desclination [deg].
HIERARCH ESO INS ADC3 END = 120.406 / Position angle at end [deg].
HIERARCH ESO INS ADC3 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC3 RA = 154734.403705 / Telescope right ascension [deg]
HIERARCH ESO INS ADC4 DEC = -343254.24859 / Telescope desclination [deg].
HIERARCH ESO INS ADC4 END = 233.788 / Position angle at end [deg].
HIERARCH ESO INS ADC4 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC4 RA = 154734.403705 / Telescope right ascension [deg]
HIERARCH ESO INS DATE = '2005-04-01' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.XSHOOTER_ICS-0.78' / Data dictionary
HIERARCH ESO INS FILT1 ID = 'PS11 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'I ' / Filter name.
HIERARCH ESO INS FILT1 NO = 11 / Filter wheel position index.
HIERARCH ESO INS FOCU1 ENC = 26884 / Absolute position [Enc].
HIERARCH ESO INS FOCU1 POS = 13.7 / Position [C].
HIERARCH ESO INS FOCU2 ENC = 11750 / Absolute position [Enc].
HIERARCH ESO INS FOCU2 POS = 0. / Position [C].
HIERARCH ESO INS ID = 'XSHOOTER/1.60' / Instrument ID.
HIERARCH ESO INS MIRR1 ID = 'Tel ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'Tel ' / Mirror name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS MODE = 'SLITSPEC' / Instrument mode used.
HIERARCH ESO INS OPTI2 ID = 'SLOT ' / OPTIi unique ID.
HIERARCH ESO INS OPTI2 NAME = 'SLOT ' / OPTIi name.
HIERARCH ESO INS OPTI2 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI2 TYPE = 'MIRROR ' / OPTIi element.
HIERARCH ESO INS OPTI3 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI3 NAME = '1.0x11 ' / OPTIi name.
HIERARCH ESO INS OPTI3 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI3 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI4 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI4 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI4 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI4 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI5 ID = 'PS3 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI5 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI5 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI5 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS PATH = 'SLITSPEC' / Optical path used.
HIERARCH ESO INS SENS21 ID = 'CA1F1 ' / sensor ID.
HIERARCH ESO INS SENS21 NAME = 'Cab.1 Flow rate' / sensor common name.
HIERARCH ESO INS SENS21 VAL = 57. / Cab. 1 Flow rate [l/h]
HIERARCH ESO INS SENS60 ID = 'NPM ' / sensor ID.
HIERARCH ESO INS SENS60 NAME = 'NIR cryo. P' / sensor common name.
HIERARCH ESO INS SENS60 VAL = 0.000173 / NIR Pressure [mbar]
HIERARCH ESO INS SENS81 ID = 'RANGE ' / sensor ID.
HIERARCH ESO INS SENS81 NAME = 'Heater Range' / sensor common name.
HIERARCH ESO INS SENS81 VAL = 4. / Lake 340 Heater Range
HIERARCH ESO INS SENS82 ID = 'HEATR ' / sensor ID.
HIERARCH ESO INS SENS82 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS SENS82 VAL = 48. / Lake 340 Heater output
HIERARCH ESO INS SHUT1 ID = 'INSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Instrument shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP1 ID = 'TMUC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'UVB Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 13.91 / UVB Camera temp. [C]
HIERARCH ESO INS TEMP10 ID = 'TMA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP10 NAME = 'Ambient temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP10 VAL = 14. / Ambient temp. [C]
HIERARCH ESO INS TEMP11 ID = 'TMADC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'BB UVB ADC temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 15.84 / BB UVB ADC temp. [C]
HIERARCH ESO INS TEMP2 ID = 'TMUP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'UVB Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 13.66 / UVB Prism temp. [C]
HIERARCH ESO INS TEMP21 ID = 'CA1OT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP21 NAME = 'Cab.1 outlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP21 VAL = 12.07 / Cab. 1 outlet temp. [C]
HIERARCH ESO INS TEMP22 ID = 'CA1IT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP22 NAME = 'Cab.1 inlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP22 VAL = 8.76 / Cab. 1 inlet temp. [C]
HIERARCH ESO INS TEMP23 ID = 'CA1CT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP23 NAME = 'Cab.1 temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP23 VAL = 17.62 / Cab. 1 temp. [C]
HIERARCH ESO INS TEMP24 ID = 'CA1AT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP24 NAME = 'Cab.1 Amb. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP24 VAL = 14.29 / Cab. 1 Amb. temp. [C]
HIERARCH ESO INS TEMP3 ID = 'TMUB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'UVB bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 13.91 / UVB bench temp. [C]
HIERARCH ESO INS TEMP4 ID = 'TMVC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'VIS Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 12.72 / VIS Camera temp. [C]
HIERARCH ESO INS TEMP5 ID = 'TMVP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP5 NAME = 'VIS Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP5 VAL = 13.19 / VIS Prism temp. [C]
HIERARCH ESO INS TEMP6 ID = 'TMVB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP6 NAME = 'VIS bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP6 VAL = 13.36 / VIS bench temp. [C]
HIERARCH ESO INS TEMP7 ID = 'TMUCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP7 NAME = 'UVB cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP7 VAL = 6.13 / UVB cryo. temp. [C]
HIERARCH ESO INS TEMP8 ID = 'TMVCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP8 NAME = 'VIS cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP8 VAL = 12.37 / VIS cryo. temp. [C]
HIERARCH ESO INS TEMP80 ID = 'OBCT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP80 NAME = 'OB Cover Tel.' / Temperature sensor name.
HIERARCH ESO INS TEMP80 VAL = 103.87 / OB Cover Telescope [K]
HIERARCH ESO INS TEMP81 ID = 'OBCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP81 NAME = 'OB Cover Tank' / Temperature sensor name.
HIERARCH ESO INS TEMP81 VAL = 103.93 / OB Cover Tank [K]
HIERARCH ESO INS TEMP82 ID = 'OBPR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP82 NAME = 'OB Prism1' / Temperature sensor name.
HIERARCH ESO INS TEMP82 VAL = 103.31 / OB Prism1 [K]
HIERARCH ESO INS TEMP83 ID = 'OBCL ' / Temperature sensor ID.
HIERARCH ESO INS TEMP83 NAME = 'OB Corrector Lens' / Temperature sensor name.
HIERARCH ESO INS TEMP83 VAL = 104.12 / OB Corrector Lens [K]
HIERARCH ESO INS TEMP84 ID = 'CP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP84 NAME = 'Cryo. Cold Plate' / Temperature sensor name.
HIERARCH ESO INS TEMP84 VAL = 75.298 / Cryostat Cold Plate [K]
HIERARCH ESO INS TEMP85 ID = 'RS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP85 NAME = 'Cryo. rad. shield' / Temperature sensor name.
HIERARCH ESO INS TEMP85 VAL = 99.276 / Cryostat rad. shield [K]
HIERARCH ESO INS TEMP86 ID = 'DCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP86 NAME = 'CCD Copper bar' / Temperature sensor name.
HIERARCH ESO INS TEMP86 VAL = 76.754 / CCD Copper bar [K]
HIERARCH ESO INS TEMP9 ID = 'TMNCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP9 NAME = 'NIR cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP9 VAL = 14.47 / NIR cryo. temp. [C]
HIERARCH ESO INS TEMP90 ID = 'NHT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP90 NAME = 'NIR Head temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP90 VAL = 79.001 / NIR Head temp. [K]
HIERARCH ESO INS TILT1 AFCX = 0.45 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT1 AFCY = -0.345 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT1 CONVX = 0.208 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT1 CONVY = 0.269 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT1 ENGX = 5.491 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT1 ENGY = 2.359 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT1 ID = 'afcs1 ' / AFCS ID.
HIERARCH ESO INS TILT1 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT1 NAME = 'Flexure comp. UVB' / AFCS description.
HIERARCH ESO INS TILT1 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT1 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT1 POSXEND = 0.49 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSXSTART = 0.459 / Piezo position at start in
HIERARCH ESO INS TILT1 POSYEND = -2.645 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSYSTART = -2.738 / Piezo position at start in
HIERARCH ESO INS TILT1 REFRACXEND = 1.009 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT1 REFRACXST = 0.872 / Atm. refr. corr. start in
HIERARCH ESO INS TILT1 REFRACYEND = -1.78 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT1 REFRACYST = -1.786 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 AFCX = -0.338 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT2 AFCY = 0.307 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT2 CONVX = 0.291 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT2 CONVY = 0.384 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT2 ENGX = 4.631 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT2 ENGY = 7.321 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT2 ID = 'afcs2 ' / AFCS ID.
HIERARCH ESO INS TILT2 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT2 NAME = 'Flexure comp. VIS' / AFCS description.
HIERARCH ESO INS TILT2 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT2 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT2 POSXEND = -0.371 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSXSTART = -0.346 / Piezo position at start in
HIERARCH ESO INS TILT2 POSYEND = 2.323 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSYSTART = 2.404 / Piezo position at start in
HIERARCH ESO INS TILT2 REFRACXEND = -1.042 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT2 REFRACXST = -0.889 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 REFRACYEND = 1.819 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT2 REFRACYST = 1.826 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 AFCX = 0.034 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT3 AFCY = 0.225 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT3 CONVX = 0.58 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT3 CONVY = 0.56 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT3 ENGX = 7.564 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT3 ENGY = 5.27 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT3 ID = 'afcs3 ' / AFCS ID.
HIERARCH ESO INS TILT3 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT3 NAME = 'Flexure comp. NIR' / AFCS description.
HIERARCH ESO INS TILT3 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT3 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT3 POSXEND = 2.56 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSXSTART = 2.662 / Piezo position at start in
HIERARCH ESO INS TILT3 POSYEND = 0.26 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSYSTART = 0.233 / Piezo position at start in
HIERARCH ESO INS TILT3 REFRACXEND = -1.16 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT3 REFRACXST = -0.948 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 REFRACYEND = 1.935 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT3 REFRACYST = 1.942 / Atm. refr. corr. start in
HIERARCH ESO DET CHIP GAIN = 1. / Gain in e-/ADU
HIERARCH ESO DET CHIP ID = 'ESO-Hawaii2RG' / Detector ID
HIERARCH ESO DET CHIP NAME = 'Hawaii2RG' / Detector name
HIERARCH ESO DET CHIP NX = 2048 / Pixels in X
HIERARCH ESO DET CHIP NY = 1100 / Pixels in Y
HIERARCH ESO DET CHIP PXSPACE = 1.8E-05 / Pixel-Pixel Spacing
HIERARCH ESO DET CHIP RON = 0. / Read-out noise in e
HIERARCH ESO DET CHIP TYPE = 'IR ' / The Type of Det Chip
HIERARCH ESO DET CHOP FREQ = 0 / Chopping Frequency
HIERARCH ESO DET CON OPMODE = 'NORMAL ' / Operational Mode
HIERARCH ESO DET DID = 'ESO-VLT-DIC.IRACE-1.48' / Dictionary Name and Re
HIERARCH ESO DET DIT = 100. / Integration Time
HIERARCH ESO DET DITDELAY = 0. / Pause Between DITs
HIERARCH ESO DET EXP NAME = 'XSHOOTER_SLT_OBJ_NIR_109_0007' / Exposure Name
HIERARCH ESO DET EXP NO= 8157 / Exposure number
HIERARCH ESO DET EXP UTC = '2012-04-18T02:21:46.6721' / File Creation Time
HIERARCH ESO DET FILE CUBE ST = F / Data Cube On/Off
HIERARCH ESO DET FRAM NO = 1 / Frame number
HIERARCH ESO DET FRAM TYPE = 'INT ' / Frame type
HIERARCH ESO DET FRAM UTC = '2012-04-18T02:21:45.0672' / Time Recv Frame
HIERARCH ESO DET IRACE ADC1 DELAY = 7 / ADC Delay Adjustment
HIERARCH ESO DET IRACE ADC1 ENABLE = 1 / Enable ADC Board (0/1)
HIERARCH ESO DET IRACE ADC1 FILTER1 = 0 / ADC Filter1 Adjustment
HIERARCH ESO DET IRACE ADC1 FILTER2 = 0 / ADC Filter2 Adjustment
HIERARCH ESO DET IRACE ADC1 HEADER = 1 / Header of ADC Board
HIERARCH ESO DET IRACE ADC1 NAME = 'ADC-RG ' / Name for ADC Board
HIERARCH ESO DET IRACE ADC2 DELAY = 7 / ADC Delay Adjustment
HIERARCH ESO DET IRACE ADC2 ENABLE = 1 / Enable ADC Board (0/1)
HIERARCH ESO DET IRACE ADC2 FILTER1 = 0 / ADC Filter1 Adjustment
HIERARCH ESO DET IRACE ADC2 FILTER2 = 0 / ADC Filter2 Adjustment
HIERARCH ESO DET IRACE ADC2 HEADER = 1 / Header of ADC Board
HIERARCH ESO DET IRACE ADC2 NAME = 'ADC-RG ' / Name for ADC Board
HIERARCH ESO DET IRACE SEQCONT = F / Sequencer Continuous Mode
HIERARCH ESO DET MINDIT= 99.7587 / Minimum DIT
HIERARCH ESO DET MODE NAME = ' ' / DCS Detector Mode
HIERARCH ESO DET NCORRS= 4 / Read-Out Mode
HIERARCH ESO DET NCORRS NAME = 'NonDest ' / Read-Out Mode Name
HIERARCH ESO DET NDIT = 3 / # of Sub-Integrations
HIERARCH ESO DET NDITSKIP = 0 / DITs skipped at 1st.INT
HIERARCH ESO DET NDSAMPLES = 151 / # of Non-Dest. Samples
HIERARCH ESO DET NDSKIP= 1 / Samples skipped per DIT
HIERARCH ESO DET RSPEED= 6 / Read-Speed Factor
HIERARCH ESO DET RSPEEDADD = 0 / Read-Speed Add
HIERARCH ESO DET SATLEVEL = 42000 / Saturation Level
HIERARCH ESO DET VOLT1 CLKHI1 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI10 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI11 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI12 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI13 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI14 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI15 = 0. / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI16 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI2 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI3 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI4 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI5 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI6 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI7 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI8 = 3.3 / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHI9 = 0. / Set Value High-Clock
HIERARCH ESO DET VOLT1 CLKHINM1= 'clk1Hi FSYNCB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM10 = 'clk10Hi MODECTRL1' / Name of High-Cloc
HIERARCH ESO DET VOLT1 CLKHINM11 = 'clk11Hi MODECTRL2' / Name of High-Cloc
HIERARCH ESO DET VOLT1 CLKHINM12 = 'clock12Hi HORIWMEN' / Name of High-Clo
HIERARCH ESO DET VOLT1 CLKHINM13 = 'clock13Hi VERTWMEN' / Name of High-Clo
HIERARCH ESO DET VOLT1 CLKHINM14 = 'clock14Hi CSB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM15 = 'clock15Hi DATACLK' / Name of High-Cloc
HIERARCH ESO DET VOLT1 CLKHINM16 = 'clock16Hi DATAIN' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM2= 'clk2Hi VCLK' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM3= 'clk3Hi LSYNCB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM4= 'clk4Hi HCLK' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM5= 'clk5Hi READEN' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM6= 'clk6Hi RESETEN' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM7= 'clk7Hi MAINRESETB' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM8= 'clk8Hi BUFDISABLE' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHINM9= 'clk9Hi FASTENPAD' / Name of High-Clock
HIERARCH ESO DET VOLT1 CLKHIT1 = 3.3252 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT10= 3.3301 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT11= 3.3398 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT12= 3.3447 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT13= 3.3398 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT14= 3.3252 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT15= 0.0488 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT16= 3.3398 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT2 = 3.335 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT3 = 3.3301 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT4 = 3.335 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT5 = 3.335 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT6 = 3.3252 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT7 = 3.3301 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT8 = 3.3301 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKHIT9 = 0.0439 / Tel Value High-Clock
HIERARCH ESO DET VOLT1 CLKLO1 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO10 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO11 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO12 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO13 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO14 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO15 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO16 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO2 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO3 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO4 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO5 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO6 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO7 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO8 = 3.3 / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLO9 = 0. / Set value Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM1= 'clk1Lo FSYNCB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM10 = 'clk10Lo MODECTRL1' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM11 = 'clk11Lo MODECTRL2' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM12 = 'clock12Lo HORIWMEN' / Name of Low-Cloc
HIERARCH ESO DET VOLT1 CLKLONM13 = 'clock13Lo VERTWMEN' / Name of Low-Cloc
HIERARCH ESO DET VOLT1 CLKLONM14 = 'clock14Lo CSB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM15 = 'clock15Lo DATACLK' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM16 = 'clock16Lo DATAIN' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM2= 'clk2Lo VCLK' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM3= 'clk3Lo LSYNCB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM4= 'clk4Lo HCLK' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM5= 'clk5Lo READEN' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM6= 'clk6Lo RESETEN' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM7= 'clk7Lo MAINRESETB' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM8= 'clk8Lo BUFDISABLE' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLONM9= 'clk9Lo FASTENPAD' / Name of Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT1 = 0.0439 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT10= 3.3398 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT11= 3.335 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT12= 0.0391 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT13= 0.0537 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT14= 0.0391 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT15= 0.0342 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT16= 3.3398 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT2 = 0.0537 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT3 = 0.0439 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT4 = 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT5 = 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT6 = 0.0391 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT7 = 0.0488 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT8 = 3.3301 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 CLKLOT9 = 0.0439 / Tel Value Low-Clock
HIERARCH ESO DET VOLT1 DC1 = 3.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC10 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC11 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC12 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC13 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC14 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC15 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC2 = 3.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC3 = 3.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC4 = 1.5 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC5 = 0.5 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC6 = 2.3 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC7 = 3.5 / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC8 = 3. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DC9 = 0. / Set value DC-Voltage
HIERARCH ESO DET VOLT1 DCNM1 = 'DC1 VDD ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM10 = 'DC10 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM11 = 'DC11 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM12 = 'DC12 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM13 = 'DC13 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM14 = 'DC14 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM15 = 'DC15 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM2 = 'DC2 VDDA' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM3 = 'DC3 VBIASPOWER' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM4 = 'DC4 DSUB' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM5 = 'DC5 VRESET' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM6 = 'DC6 BIASGATE' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM7 = 'DC7 EXTREF' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM8 = 'DC8 VLOAD' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCNM9 = 'DC9 ' / Name of DC-voltage
HIERARCH ESO DET VOLT1 DCTA1 = 3.3105 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA10 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA11 = 0.0098 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA12 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA13 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA14 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA15 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA2 = 3.3154 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA3 = 3.3154 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA4 = 1.5088 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA5 = 0.5029 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA6 = 2.3145 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA7 = 3.5107 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA8 = 3.0127 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTA9 = 0.0049 / Tel Value 1 for DC
HIERARCH ESO DET VOLT1 DCTB1 = 3.3057 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB10 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB11 = 0.0098 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB12 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB13 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB14 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB15 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB2 = 3.3057 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB3 = 3.3008 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB4 = 1.5039 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB5 = 0.5029 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB6 = 2.2656 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB7 = 3.4912 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB8 = 3.0078 / Tel Value 2 for DC
HIERARCH ESO DET VOLT1 DCTB9 = 0.0049 / Tel Value 2 for DC
HIERARCH ESO DET WIN NX= 2048 / # of Pixels in X
HIERARCH ESO DET WIN NY= 1100 / # of Pixels in Y
HIERARCH ESO DET WIN STARTX = 1 / Lower left X ref
HIERARCH ESO DET WIN STARTY = 1 / Lower left Y ref
HIERARCH ESO DET WIN TYPE = 0 / Win-Type: 0=SW/1=HW
HIERARCH ESO PRO CATG = 'SCI_SLIT_MERGE1D_NIR' / Category of pipeline product f
HIERARCH ESO PRO DATANCOM = 1
HIERARCH ESO PRO B RELOFF RA = 4.929452
HIERARCH ESO PRO B RELOFF DEC = 0.836958
HIERARCH ESO PRO B CUMOFF RA = 2.464726
HIERARCH ESO PRO B CUMOFF DEC = 0.418479
HIERARCH ESO PRO RECT BIN LAMBDA = 0.06
HIERARCH ESO PRO RECT BIN SPACE= 0.21
HIERARCH ESO PRO RECT LAMBDA MIN = 994.02
HIERARCH ESO PRO RECT LAMBDA MAX = 2478.96
HIERARCH ESO PRO RECT SPACE MIN= -10.3400001526
HIERARCH ESO PRO RECT SPACE MAX= 5.40999984741
HIERARCH ESO PRO EXTRACT SLIT MIN = 24.
HIERARCH ESO PRO EXTRACT SLIT MAX = 52.
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE,SLIT,NODDING' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'xsh_scired_slit_nod' / Pipeline recipe (unique
HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'xsh/1.3.7' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME= 'XSHOO.2012-04-18T02:16:39.331.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG= 'OBJECT_SLIT_NOD_NIR' / Category of raw frame
HIERARCH ESO PRO REC1 RAW2 NAME= 'XSHOO.2012-04-18T02:23:45.647.fits' / File na
HIERARCH ESO PRO REC1 RAW2 CATG= 'OBJECT_SLIT_NOD_NIR' / Category of raw frame
HIERARCH ESO PRO REC1 CAL1 NAME= 'SPECTRAL_FORMAT_TAB_NIR.fits' / File name of
HIERARCH ESO PRO REC1 CAL1 CATG= 'SPECTRAL_FORMAT_TAB_NIR' / Category of calibr
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = '062c1ee8138a40cbb1cb5fcd108f47c1' / MD
HIERARCH ESO PRO REC1 CAL2 NAME= 'MASTER_DARK_NIR_100s.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL2 CATG= 'MASTER_DARK_NIR' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = 'd9d897c95aba7030c5f525f4c9d82e7e' / MD
HIERARCH ESO PRO REC1 CAL3 NAME= 'ORDER_TAB_EDGES_SLIT_NIR_40s.fits' / File nam
HIERARCH ESO PRO REC1 CAL3 CATG= 'ORDER_TAB_EDGES_SLIT_NIR' / Category of calib
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = '3571a268f8f0e568217d4aed08d83bbb' / MD
HIERARCH ESO PRO REC1 CAL4 NAME= 'MASTER_FLAT_SLIT_NIR_40s.fits' / File name of
HIERARCH ESO PRO REC1 CAL4 CATG= 'MASTER_FLAT_SLIT_NIR' / Category of calibrati
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '8ecd0a51f4f5849bcf584af099bbee4a' / MD
HIERARCH ESO PRO REC1 CAL5 NAME= 'MASTER_BP_MAP_NIR_100s.fits' / File name of c
HIERARCH ESO PRO REC1 CAL5 CATG= 'MASTER_BP_MAP_NIR' / Category of calibration
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = '7f347ddbd54443c374ea76c76576a000' / MD
HIERARCH ESO PRO REC1 CAL6 NAME= 'DISP_TAB_AFC_NIR.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL6 CATG= 'DISP_TAB_AFC_NIR' / Category of calibration f
HIERARCH ESO PRO REC1 CAL6 DATAMD5 = '78d0785ab99b60dd3674a8885e005e89' / MD
HIERARCH ESO PRO REC1 CAL7 NAME= 'WAVE_TAB_AFC_NIR.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL7 CATG= 'WAVE_TAB_AFC_NIR' / Category of calibration f
HIERARCH ESO PRO REC1 CAL7 DATAMD5 = 'f6b66b0d3b0f9c12077ae5e0d732d549' / MD
HIERARCH ESO PRO REC1 CAL8 NAME= 'RESPONSE_MERGE1D_SLIT_NIR.fits' / File name o
HIERARCH ESO PRO REC1 CAL8 CATG= 'RESPONSE_MERGE1D_SLIT_NIR' / Category of cali
HIERARCH ESO PRO REC1 CAL8 DATAMD5 = 'ea1a8a814583df8df5794d5079730fe2' / MD
HIERARCH ESO PRO REC1 CAL9 NAME= 'xsh_paranal_extinct_nir.fits' / File name of
HIERARCH ESO PRO REC1 CAL9 CATG= 'ATMOS_EXT_NIR' / Category of calibration fram
HIERARCH ESO PRO REC1 CAL9 DATAMD5 = '6aea4595776baaa7efc244012254dd9c' / MD
HIERARCH ESO PRO REC1 PARAM1 NAME = 'keep-temp' / If 'no', temporary files
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'no ' / Default: 'no'
HIERARCH ESO PRO REC1 PARAM2 NAME = 'debug-level' / Additional xshooter deb
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM3 NAME = 'test ' / Can be any string, usage d
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM4 NAME = 'time-stamp' / Add timestamp to product
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM5 NAME = 'pre-overscan-corr' / pre-overscan corr
HIERARCH ESO PRO REC1 PARAM5 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM6 NAME = 'background-nb-y' / number of points of
HIERARCH ESO PRO REC1 PARAM6 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM7 NAME = 'background-radius-x' / half size of th
HIERARCH ESO PRO REC1 PARAM7 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM8 NAME = 'background-radius-y' / half size of th
HIERARCH ESO PRO REC1 PARAM8 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM9 NAME = 'background-min-grid-frac' / Minimum fr
HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.3333 ' / Default: 0.3333
HIERARCH ESO PRO REC1 PARAM10 NAME = 'background-grid-frac' / maximum fracti
HIERARCH ESO PRO REC1 PARAM10 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM11 NAME = 'background-method' / method adopted fo
HIERARCH ESO PRO REC1 PARAM11 VALUE = 'poly ' / Default: 'poly'
HIERARCH ESO PRO REC1 PARAM12 NAME = 'background-smooth-x' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM12 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM13 NAME = 'background-smooth-y' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM13 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM14 NAME = 'background-debug' / Generate a table c
HIERARCH ESO PRO REC1 PARAM14 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM15 NAME = 'removecrhsingle-frac-max' / Max fracti
HIERARCH ESO PRO REC1 PARAM15 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM16 NAME = 'removecrhsingle-sigmalim' / Poisson fl
HIERARCH ESO PRO REC1 PARAM16 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM17 NAME = 'removecrhsingle-flim' / Minimum contra
HIERARCH ESO PRO REC1 PARAM17 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM18 NAME = 'removecrhsingle-niter' / Max number of
HIERARCH ESO PRO REC1 PARAM18 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM19 NAME = 'rectify-kernel' / Name of the Interpol
HIERARCH ESO PRO REC1 PARAM19 VALUE = 'default ' / Default: 'default'
HIERARCH ESO PRO REC1 PARAM20 NAME = 'rectify-radius' / Rectify Interpolatio
HIERARCH ESO PRO REC1 PARAM20 VALUE = '1 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM21 NAME = 'rectify-bin-lambda' / Wavelength step
HIERARCH ESO PRO REC1 PARAM21 VALUE = '0.06 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM22 NAME = 'rectify-bin-slit' / Spatial step along
HIERARCH ESO PRO REC1 PARAM22 VALUE = '0.21 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM23 NAME = 'rectify-full-slit' / Use full slit if
HIERARCH ESO PRO REC1 PARAM23 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM24 NAME = 'rectify-conserve-flux' / Use flux cons
HIERARCH ESO PRO REC1 PARAM24 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM25 NAME = 'rectify-fast' / Fast if TRUE (Rect[B-A
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM26 NAME = 'localize-method' / Localization method
HIERARCH ESO PRO REC1 PARAM26 VALUE = 'GAUSSIAN' / Default: 'GAUSSIAN'
HIERARCH ESO PRO REC1 PARAM27 NAME = 'localize-chunk-nb' / Number of chunks
HIERARCH ESO PRO REC1 PARAM27 VALUE = '10 ' / Default: 10
HIERARCH ESO PRO REC1 PARAM28 NAME = 'localize-thresh' / Threshold relative
HIERARCH ESO PRO REC1 PARAM28 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM29 NAME = 'localize-deg-lambda' / Degree in lambd
HIERARCH ESO PRO REC1 PARAM29 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM30 NAME = 'localize-slit-position' / Object posit
HIERARCH ESO PRO REC1 PARAM30 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM31 NAME = 'localize-slit-hheight' / Object half h
HIERARCH ESO PRO REC1 PARAM31 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM32 NAME = 'localize-kappa' / Kappa value for sigm
HIERARCH ESO PRO REC1 PARAM32 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM33 NAME = 'localize-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM33 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM34 NAME = 'localize-use-skymask' / TRUE if we wan
HIERARCH ESO PRO REC1 PARAM34 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM35 NAME = 'localize-nod-throw' / Step (arcsec) be
HIERARCH ESO PRO REC1 PARAM35 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM36 NAME = 'extract-method' / Method used for extr
HIERARCH ESO PRO REC1 PARAM36 VALUE = 'NOD ' / Default: 'NOD'
HIERARCH ESO PRO REC1 PARAM37 NAME = 'mergeord-method' / Method for combinin
HIERARCH ESO PRO REC1 PARAM37 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM38 NAME = 'combinenod-min' / minimum NS size of r
HIERARCH ESO PRO REC1 PARAM38 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM39 NAME = 'combinenod-clip' / TRUE if do sigma cl
HIERARCH ESO PRO REC1 PARAM39 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM40 NAME = 'combinenod-clip-sigma' / Kappa value i
HIERARCH ESO PRO REC1 PARAM40 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM41 NAME = 'combinenod-clip-niter' / Number of ite
HIERARCH ESO PRO REC1 PARAM41 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM42 NAME = 'combinenod-clip-diff' / Minimal change
HIERARCH ESO PRO REC1 PARAM42 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM43 NAME = 'combinenod-throwlist' / Name of ascii
HIERARCH ESO PRO REC1 PARAM43 VALUE = 'throwlist.asc' / Default: 'throwlist.a
HIERARCH ESO PRO REC1 PARAM44 NAME = 'combinenod-method' / Combination metho
HIERARCH ESO PRO REC1 PARAM44 VALUE = 'MEAN ' / Default: 'MEAN'
HIERARCH ESO PRO REC1 PARAM45 NAME = 'max-slit' / Lower Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM45 VALUE = '5.7 ' / Default: 5.7
HIERARCH ESO PRO REC1 PARAM46 NAME = 'min-slit' / Upper Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM46 VALUE = '-5.3 ' / Default: -5.3
HIERARCH ESO PRO REC1 PARAM47 NAME = 'crh-clip-kappa' / Kappa value in sigma
HIERARCH ESO PRO REC1 PARAM47 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM48 NAME = 'crh-clip-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM48 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM49 NAME = 'crh-clip-frac' / Minimal ratio of poin
HIERARCH ESO PRO REC1 PARAM49 VALUE = '0.7 ' / Default: 0.7
HIERARCH ESO PRO REC1 PARAM50 NAME = 'compute-map' / if TRUE recompute (wave
HIERARCH ESO PRO REC1 PARAM50 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM51 NAME = 'do-flatfield' / TRUE if we do the flat
HIERARCH ESO PRO REC1 PARAM51 VALUE = 'true ' / Default: true
HIERARCH ESO ADA ABSROT END = 168.33614 / Abs rot angle at exp end
HIERARCH ESO ADA ABSROT PPOS = 'NEG ' / sign of probe position
HIERARCH ESO ADA ABSROT START = 167.71293 / Abs rot angle at exp start
HIERARCH ESO ADA GUID DEC = -34.57819 / -34:34:41.4 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 236.690434 / 15:46:45.7 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG= 99.63621 / Position angle at start
HIERARCH ESO OCS DET3 IMGNAME = 'XSHOOTER_SLT_OBJ_NIR_' / Data File Name.
HIERARCH ESO SEQ ARM = 'NIR ' / Instrument Arm
HIERARCH ESO SEQ CUMOFF DEC = -0.418479 / Cumulative DEC offset
HIERARCH ESO SEQ CUMOFF RA = -2.464726 / Cumulative RA offset
HIERARCH ESO SEQ CUMOFF X = 0. / Cumulative offset X (along the sli
HIERARCH ESO SEQ CUMOFF Y = 2.5 / Cumulative offset Y (along the sli
HIERARCH ESO SEQ JITTER WIDTH = 0. / Width of the Jitter box (arcsec)
HIERARCH ESO SEQ NOD THROW = 5. / Nodding throw length in arcsec
HIERARCH ESO SEQ RELOFF DEC = -0.418479 / List of DEC offsets
HIERARCH ESO SEQ RELOFF RA = -2.464726 / List of RA offsets
HIERARCH ESO QC NPIXSAT= 1630. / Number of saturated pixels
HIERARCH ESO QC FPIXSAT= 0.000756647355912 / Fraction of saturated pixels
HIERARCH ESO QC CRRATE = 1.98288256567 / Number of detected cosmic ray hits p
HIERARCH ESO QC NCRH AVG = 1384 / Number of detected cosmic ray hits
HIERARCH ESO QC VRAD BARYCOR = 16.672442028 / Barycentric radial velocity co
HIERARCH ESO QC VRAD HELICOR = 16.6707457581 / Heliocentric radial velocity c
HIERARCH ESO QC FLUX1 VAL = 16431.3656133 / Flux in 1514-1548 nm
HIERARCH ESO QC FLUX1 ERR = 44.0221161413 / Error Flux in 1514-1548 nm
HIERARCH ESO QC FLUX1 SN = 373.252516088 / Signal to noise ratio in 1514-1
HIERARCH ESO QC FLUX2 VAL = 53739.1679849 / Flux in 2214-2243 nm
HIERARCH ESO QC FLUX2 ERR = 161.03141633 / Error Flux in 2214-2243 nm
HIERARCH ESO QC FLUX2 SN = 333.718532753 / Signal to noise ratio in 2214-2
.
HISTORY ESO-DESCRIPTORS START ................
HISTORY 'LHCUTS','R*4',1,4,'5E14.7'
HISTORY 0.0000000E+00 0.0000000E+00 1.1754944E-38 2.9661237E-13
HISTORY
HISTORY 'WAT1_001','C*1',1,68,'68A1'
HISTORY wtype=linear label=Wavelength units=angstroms units_display=angstrom
HISTORY
HISTORY ESO-DESCRIPTORS END ................
.
END
END
#--- sp/Sz71_U.fit
#ext xtension bpx (dim) x2880 extname
#-------------------------------------------------------------------------------
#000 main -32 (14554) 41b [LINEAR=298.92/589.98(0.02)]
#-------------------------------------------------------------------------------
SIMPLE = T / Standard FITS format: NOST 100-2.0
BITPIX = -32 / No. of bits per pixel
NAXIS = 1 / No. of axes in image
NAXIS1 = 14554 / No. of pixels
EXTEND = T / FITS extension may be present
BLOCKED = T / FITS file may be blocked
.
CRPIX1 = 1. / Reference pixel
CRVAL1 = 298.92 / Coordinate at reference pixel
CDELT1 = 0.02 / Coord. incr. per pixel (original value)
CTYPE1 = 'LINEAR ' / Units of coordinate
BUNIT = ' ' / Units of data values
DATAMAX = 2.95778999166E-13 / Maximum data value
DATAMIN = 1.17549435082E-38 / Minimum data value
.
ORIGIN = 'ESO-MIDAS' / Written by MIDAS
DATE = '2012-07-24T13:10:15' / [UTC] Date of writing
FILENAME= 'flux_Sz71_UVB_phot.fits' / Original file base-name
MIDASFTP= 'IMAGE ' / MIDAS File Type
.
OBJECT = 'Sz71 ' / MIDAS desc.: IDENT(1)
RA = 236.685665 / MIDAS desc.: O_POS(1)
DEC = -34.51045 / MIDAS desc.: O_POS(2)
EQUINOX = 2000. / MIDAS desc.: O_POS(3)
DATE-OBS= '2012-04-18' / MIDAS desc.: O_TIME(1)
MJD-OBS = 56035.09480312 / MIDAS desc.: O_TIME(4)
TM-START= 8190.989568201 / MIDAS desc.: O_TIME(5)
EXPTIME = 300. / MIDAS desc.: O_TIME(7)
COMMENT NOST 100-2.0: Hanisch,R. et al. 2001, Astron. & Astrophys. 376, 559
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astron
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..35
COMMENT ITS (Flexible Image Transport System) format is defined in 'Astro
COMMENT nd Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..3
COMMENT TS (Flexible Image Transport System) format is defined in 'Astr
COMMENT d Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..
COMMENT S (Flexible Image Transport System) format is defined in 'Ast
COMMENT Astrophysics', volume 376, page 359; bibcode: 2001A&A...376.
COMMENT (Flexible Image Transport System) format is defined in 'As
COMMENT strophysics', volume 376, page 359; bibcode: 2001A&A...376
COMMENT Flexible Image Transport System) format is defined in 'A
COMMENT trophysics', volume 376, page 359; bibcode: 2001A&A...37
COMMENT lexible Image Transport System) format is defined in '
COMMENT rophysics', volume 376, page 359; bibcode: 2001A&A...3
COMMENT exible Image Transport System) format is defined in
COMMENT ophysics', volume 376, page 359; bibcode: 2001A&A...
COMMENT xible Image Transport System) format is defined i
COMMENT physics', volume 376, page 359; bibcode: 2001A&A..
COMMENT ible Image Transport System) format is defined
COMMENT hysics', volume 376, page 359; bibcode: 2001A&A.
COMMENT ble Image Transport System) format is define
COMMENT ysics', volume 376, page 359; bibcode: 2001A&A
COMMENT le Image Transport System) format is defin
COMMENT sics', volume 376, page 359; bibcode: 2001A&
COMMENT e Image Transport System) format is defi
COMMENT ics', volume 376, page 359; bibcode: 2001A
COMMENT Image Transport System) format is def
COMMENT cs', volume 376, page 359; bibcode: 2001
COMMENT mage Transport System) format is de
COMMENT s', volume 376, page 359; bibcode: 200
COMMENT age Transport System) format is d
COMMENT ', volume 376, page 359; bibcode: 20
TELESCOP= 'ESO-VLT-U2' / MIDAS desc.: TELESCOP(1)
INSTRUME= 'XSHOOTER' / MIDAS desc.: INSTRUME(1)
RADECSYS= 'FK5 ' / MIDAS desc.: RADECSYS(1)
OBSERVER= 'UNKNOWN ' / MIDAS desc.: OBSERVER(1)
IRAF-TLM= '2012-06-19T06:45:41' / Time of last modification
UTC = 8186. / 02:16:26.000 UTC at start
LST = 40874.079 / 11:21:14.079 LST at start
PI-COI = 'UNKNOWN ' / PI-COI name.
CHECKSUM= 'MEAAM926ME8AM985' / HDU checksum updated 2012-04-18T02:23:28
DATASUM = '1956776462' / data unit checksum updated 2012-04-18T02:23:28
DATAMD5 = '1ab0a6d3faf516115e4a2d854fa17963' / MD5 checksum
PIPEFILE= 'SCI_SLIT_FLUX_MERGE1D_UVB.fits' / Filename of data product
HIERARCH ESO OBS AIRM = 5. / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 2. / Req. max. seeing
HIERARCH ESO OBS AMBI TRANS = '2CLR ' / Req. sky transparency
HIERARCH ESO OBS ATM = 'NATM ' / Req. Atmospheric Turbulence Model
HIERARCH ESO OBS CONTAINER ID = -999 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE= 'U ' / Scheduling container type
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.12' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 1292 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 200230036 / Observation block ID
HIERARCH ESO OBS MOON DIST = 30 / Req. min. angular dist. from moon
HIERARCH ESO OBS MOON FLI = 1. / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'Sz71 ' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 0 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '089.C-0143(A)' / ESO program identification
HIERARCH ESO OBS START = '2012-04-18T02:10:58' / OB start time
HIERARCH ESO OBS STREHLRATIO = 0. / Req. strehl ratio
HIERARCH ESO OBS TARG NAME = 'Sz71 ' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TWILIGHT = 0 / Req. twilight
HIERARCH ESO OBS WATERVAPOUR = 0. / Req. water vapour
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 1 / Exposure number within template
HIERARCH ESO TPL ID = 'XSHOOTER_slt_obs_AutoNodOnSlit' / Template signa
HIERARCH ESO TPL NAME = 'XSHOOTER observations with AutoNodOnSlit offset'
HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ= 'XSHOOTER_obs_AutoNodOnSlit.seq' / Sequencer scri
HIERARCH ESO TPL START = '2012-04-18T02:16:00' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 213208 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.816 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.868 / Airmass at start
HIERARCH ESO TEL ALT = 32.283 / Alt angle at start
HIERARCH ESO TEL AMBI FWHM END = 0.57 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START = 0.63 / Observatory Seeing queried
HIERARCH ESO TEL AMBI PRES END = 745.27 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START = 745.28 / Observatory ambient air pr
HIERARCH ESO TEL AMBI RHUM = 21. / Observatory ambient relative humid
HIERARCH ESO TEL AMBI TAU0 = 0.0052 / Average coherence time
HIERARCH ESO TEL AMBI TEMP = 13.29 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR = 34.5 / Observatory ambient wind direction
HIERARCH ESO TEL AMBI WINDSP = 6.3 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 296.639 / Az angle at start S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.557 / Focal length
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale
HIERARCH ESO TEL FOCU VALUE = 0.596 / M2 setting
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT= -24.6272 / Tel geo latitute (+=North)
HIERARCH ESO TEL GEOLON= -70.4048 / Tel geo longitude (+=East)
HIERARCH ESO TEL IA FWHM = 0.61 / Delivered seeing corrected by airm
HIERARCH ESO TEL IA FWHMLIN = 0.73 / Delivered seeing on IA detector (l
HIERARCH ESO TEL IA FWHMLINOBS = 1.04 / Delivered seeing on IA detector (l
HIERARCH ESO TEL ID = 'v 4.4 ' / TCS version number
HIERARCH ESO TEL MOON DEC = 2.12229 / 02:07:20.2 DEC (J2000)
HIERARCH ESO TEL MOON RA = 351.631051 / 23:26:31.4 RA (J2000)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = -98.785 / Parallactic angle at end
HIERARCH ESO TEL PARANG START = -99.406 / Parallactic angle at start
HIERARCH ESO TEL TARG ALPHA = 154644.73 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = -343035.5 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Ju
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 12.28 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO INS ADC1 DEC = -343254.23596 / Telescope desclination [deg].
HIERARCH ESO INS ADC1 ENCSTART = 23739 / ADC encoder value at exposure star
HIERARCH ESO INS ADC1 END = 121.777 / Position angle at end [deg].
HIERARCH ESO INS ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 154734.402843 / Telescope right ascension [deg]
HIERARCH ESO INS ADC2 DEC = -343254.23596 / Telescope desclination [deg].
HIERARCH ESO INS ADC2 ENCSTART = 49802 / ADC encoder value at exposure star
HIERARCH ESO INS ADC2 END = 243.85 / Position angle at end [deg].
HIERARCH ESO INS ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 154734.402843 / Telescope right ascension [deg]
HIERARCH ESO INS ADC3 DEC = -343254.23596 / Telescope desclination [deg].
HIERARCH ESO INS ADC3 END = 120.236 / Position angle at end [deg].
HIERARCH ESO INS ADC3 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC3 RA = 154734.402843 / Telescope right ascension [deg]
HIERARCH ESO INS ADC4 DEC = -343254.23596 / Telescope desclination [deg].
HIERARCH ESO INS ADC4 END = 234.023 / Position angle at end [deg].
HIERARCH ESO INS ADC4 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC4 RA = 154734.402843 / Telescope right ascension [deg]
HIERARCH ESO INS DATE = '2005-04-01' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.XSHOOTER_ICS-0.78' / Data dictionary
HIERARCH ESO INS FILT1 ID = 'PS11 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'I ' / Filter name.
HIERARCH ESO INS FILT1 NO = 11 / Filter wheel position index.
HIERARCH ESO INS FOCU1 ENC = 26884 / Absolute position [Enc].
HIERARCH ESO INS FOCU1 POS = 13.7 / Position [C].
HIERARCH ESO INS FOCU2 ENC = 11750 / Absolute position [Enc].
HIERARCH ESO INS FOCU2 POS = 0. / Position [C].
HIERARCH ESO INS ID = 'XSHOOTER/1.60' / Instrument ID.
HIERARCH ESO INS MIRR1 ID = 'Tel ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'Tel ' / Mirror name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS MODE = 'SLITSPEC' / Instrument mode used.
HIERARCH ESO INS OPTI2 ID = 'SLOT ' / OPTIi unique ID.
HIERARCH ESO INS OPTI2 NAME = 'SLOT ' / OPTIi name.
HIERARCH ESO INS OPTI2 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI2 TYPE = 'MIRROR ' / OPTIi element.
HIERARCH ESO INS OPTI3 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI3 NAME = '1.0x11 ' / OPTIi name.
HIERARCH ESO INS OPTI3 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI3 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI4 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI4 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI4 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI4 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI5 ID = 'PS3 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI5 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI5 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI5 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS PATH = 'SLITSPEC' / Optical path used.
HIERARCH ESO INS SENS21 ID = 'CA1F1 ' / sensor ID.
HIERARCH ESO INS SENS21 NAME = 'Cab.1 Flow rate' / sensor common name.
HIERARCH ESO INS SENS21 VAL = 57. / Cab. 1 Flow rate [l/h]
HIERARCH ESO INS SENS60 ID = 'NPM ' / sensor ID.
HIERARCH ESO INS SENS60 NAME = 'NIR cryo. P' / sensor common name.
HIERARCH ESO INS SENS60 VAL = 0.000173 / NIR Pressure [mbar]
HIERARCH ESO INS SENS81 ID = 'RANGE ' / sensor ID.
HIERARCH ESO INS SENS81 NAME = 'Heater Range' / sensor common name.
HIERARCH ESO INS SENS81 VAL = 4. / Lake 340 Heater Range
HIERARCH ESO INS SENS82 ID = 'HEATR ' / sensor ID.
HIERARCH ESO INS SENS82 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS SENS82 VAL = 48.1 / Lake 340 Heater output
HIERARCH ESO INS SHUT1 ID = 'INSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Instrument shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP1 ID = 'TMUC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'UVB Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 13.91 / UVB Camera temp. [C]
HIERARCH ESO INS TEMP10 ID = 'TMA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP10 NAME = 'Ambient temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP10 VAL = 14. / Ambient temp. [C]
HIERARCH ESO INS TEMP11 ID = 'TMADC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'BB UVB ADC temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 15.84 / BB UVB ADC temp. [C]
HIERARCH ESO INS TEMP2 ID = 'TMUP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'UVB Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 13.66 / UVB Prism temp. [C]
HIERARCH ESO INS TEMP21 ID = 'CA1OT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP21 NAME = 'Cab.1 outlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP21 VAL = 12.07 / Cab. 1 outlet temp. [C]
HIERARCH ESO INS TEMP22 ID = 'CA1IT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP22 NAME = 'Cab.1 inlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP22 VAL = 8.76 / Cab. 1 inlet temp. [C]
HIERARCH ESO INS TEMP23 ID = 'CA1CT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP23 NAME = 'Cab.1 temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP23 VAL = 17.62 / Cab. 1 temp. [C]
HIERARCH ESO INS TEMP24 ID = 'CA1AT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP24 NAME = 'Cab.1 Amb. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP24 VAL = 14.29 / Cab. 1 Amb. temp. [C]
HIERARCH ESO INS TEMP3 ID = 'TMUB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'UVB bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 13.91 / UVB bench temp. [C]
HIERARCH ESO INS TEMP4 ID = 'TMVC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'VIS Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 12.72 / VIS Camera temp. [C]
HIERARCH ESO INS TEMP5 ID = 'TMVP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP5 NAME = 'VIS Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP5 VAL = 13.19 / VIS Prism temp. [C]
HIERARCH ESO INS TEMP6 ID = 'TMVB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP6 NAME = 'VIS bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP6 VAL = 13.36 / VIS bench temp. [C]
HIERARCH ESO INS TEMP7 ID = 'TMUCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP7 NAME = 'UVB cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP7 VAL = 6.13 / UVB cryo. temp. [C]
HIERARCH ESO INS TEMP8 ID = 'TMVCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP8 NAME = 'VIS cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP8 VAL = 12.37 / VIS cryo. temp. [C]
HIERARCH ESO INS TEMP80 ID = 'OBCT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP80 NAME = 'OB Cover Tel.' / Temperature sensor name.
HIERARCH ESO INS TEMP80 VAL = 103.87 / OB Cover Telescope [K]
HIERARCH ESO INS TEMP81 ID = 'OBCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP81 NAME = 'OB Cover Tank' / Temperature sensor name.
HIERARCH ESO INS TEMP81 VAL = 103.93 / OB Cover Tank [K]
HIERARCH ESO INS TEMP82 ID = 'OBPR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP82 NAME = 'OB Prism1' / Temperature sensor name.
HIERARCH ESO INS TEMP82 VAL = 103.32 / OB Prism1 [K]
HIERARCH ESO INS TEMP83 ID = 'OBCL ' / Temperature sensor ID.
HIERARCH ESO INS TEMP83 NAME = 'OB Corrector Lens' / Temperature sensor name.
HIERARCH ESO INS TEMP83 VAL = 104.12 / OB Corrector Lens [K]
HIERARCH ESO INS TEMP84 ID = 'CP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP84 NAME = 'Cryo. Cold Plate' / Temperature sensor name.
HIERARCH ESO INS TEMP84 VAL = 75.296 / Cryostat Cold Plate [K]
HIERARCH ESO INS TEMP85 ID = 'RS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP85 NAME = 'Cryo. rad. shield' / Temperature sensor name.
HIERARCH ESO INS TEMP85 VAL = 99.282 / Cryostat rad. shield [K]
HIERARCH ESO INS TEMP86 ID = 'DCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP86 NAME = 'CCD Copper bar' / Temperature sensor name.
HIERARCH ESO INS TEMP86 VAL = 76.756 / CCD Copper bar [K]
HIERARCH ESO INS TEMP9 ID = 'TMNCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP9 NAME = 'NIR cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP9 VAL = 14.47 / NIR cryo. temp. [C]
HIERARCH ESO INS TEMP90 ID = 'NHT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP90 NAME = 'NIR Head temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP90 VAL = 79.001 / NIR Head temp. [K]
HIERARCH ESO INS TILT1 AFCX = 0.45 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT1 AFCY = -0.345 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT1 CONVX = 0.208 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT1 CONVY = 0.269 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT1 ENGX = 5.49 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT1 ENGY = 2.357 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT1 ID = 'afcs1 ' / AFCS ID.
HIERARCH ESO INS TILT1 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT1 NAME = 'Flexure comp. UVB' / AFCS description.
HIERARCH ESO INS TILT1 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT1 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT1 POSXEND = 0.49 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSXSTART = 0.459 / Piezo position at start in
HIERARCH ESO INS TILT1 POSYEND = -2.645 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSYSTART = -2.738 / Piezo position at start in
HIERARCH ESO INS TILT1 REFRACXEND = 1.009 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT1 REFRACXST = 0.872 / Atm. refr. corr. start in
HIERARCH ESO INS TILT1 REFRACYEND = -1.78 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT1 REFRACYST = -1.786 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 AFCX = -0.338 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT2 AFCY = 0.307 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT2 CONVX = 0.291 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT2 CONVY = 0.384 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT2 ENGX = 4.632 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT2 ENGY = 7.324 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT2 ID = 'afcs2 ' / AFCS ID.
HIERARCH ESO INS TILT2 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT2 NAME = 'Flexure comp. VIS' / AFCS description.
HIERARCH ESO INS TILT2 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT2 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT2 POSXEND = -0.371 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSXSTART = -0.346 / Piezo position at start in
HIERARCH ESO INS TILT2 POSYEND = 2.323 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSYSTART = 2.404 / Piezo position at start in
HIERARCH ESO INS TILT2 REFRACXEND = -1.042 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT2 REFRACXST = -0.889 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 REFRACYEND = 1.819 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT2 REFRACYST = 1.826 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 AFCX = 0.034 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT3 AFCY = 0.225 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT3 CONVX = 0.58 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT3 CONVY = 0.56 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT3 ENGX = 7.563 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT3 ENGY = 5.272 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT3 ID = 'afcs3 ' / AFCS ID.
HIERARCH ESO INS TILT3 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT3 NAME = 'Flexure comp. NIR' / AFCS description.
HIERARCH ESO INS TILT3 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT3 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT3 POSXEND = 2.56 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSXSTART = 2.662 / Piezo position at start in
HIERARCH ESO INS TILT3 POSYEND = 0.26 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSYSTART = 0.233 / Piezo position at start in
HIERARCH ESO INS TILT3 REFRACXEND = -1.16 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT3 REFRACXST = -0.948 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 REFRACYEND = 1.935 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT3 REFRACYST = 1.942 / Atm. refr. corr. start in
HIERARCH ESO INS UVBFOCUS ENC = 26884 / UVB Focus encoder value at exposur
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET CHIP1 DATE = '2005-04-22' / Date of installation [YYYY-MM-DD
HIERARCH ESO DET CHIP1 ID = 'Pisces Austr II' / Detector chip identificatio
HIERARCH ESO DET CHIP1 INDEX = 1 / Chip index
HIERARCH ESO DET CHIP1 NAME = 'e2v CC44-82' / Detector chip name
HIERARCH ESO DET CHIP1 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP1 NY = 4102 / # of pixels along Y
HIERARCH ESO DET CHIP1 PSZX = 15. / Size of pixel in X
HIERARCH ESO DET CHIP1 PSZY = 15. / Size of pixel in Y
HIERARCH ESO DET CHIP1 X = 1 / X location in array
HIERARCH ESO DET CHIP1 XGAP = 0. / Gap between chips along x
HIERARCH ESO DET CHIP1 Y = 1 / Y location in array
HIERARCH ESO DET CHIP1 YGAP = 0. / Gap between chips along y
HIERARCH ESO DET CHIPS = 1 / # of chips in detector array
HIERARCH ESO DET DATE = '2005-04-22' / Installation date
HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET EXP NO= 371 / Unique exposure ID number
HIERARCH ESO DET EXP RDTTIME = 4.424 / image readout time
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP XFERTIM = 112.042 / image transfer time
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id
HIERARCH ESO DET NAME = 'shdetb - shdetb' / Name of detector system
HIERARCH ESO DET OUT1 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT1 CONAD = 0.62 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT1 GAIN = 1.61 / Conversion from electrons to ADU
HIERARCH ESO DET OUT1 ID = 'R ' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 INDEX = 2 / Output index
HIERARCH ESO DET OUT1 NAME = 'R ' / Description of output
HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X
HIERARCH ESO DET OUT1 NY = 3000 / valid pixels along Y
HIERARCH ESO DET OUT1 OVSCX = 48 / Overscan region in X
HIERARCH ESO DET OUT1 OVSCY = 0 / Overscan region in Y
HIERARCH ESO DET OUT1 PRSCX = 48 / Prescan region in X
HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT1 RON = 2.6 / Readout noise per output (e-)
HIERARCH ESO DET OUT1 X= 2048 / X location of output
HIERARCH ESO DET OUT1 Y= 1 / Y location of output
HIERARCH ESO DET OUTPUTS = 1 / # of outputs
HIERARCH ESO DET OUTREF= 0 / reference output
HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET READ CLOCK = '100k/1pt/hg' / Readout clock pattern used
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin
HIERARCH ESO DET READ SPEED = '1pt/100k/hg' / Readout speed
HIERARCH ESO DET SHUT ID = 'VA 25mm BistableCCD Sensor1' / Shutter unique
HIERARCH ESO DET SHUT TMCLOS = 0. / Time taken to close shutter
HIERARCH ESO DET SHUT TMOPEN = 0. / Time taken to open shutter
HIERARCH ESO DET SHUT TYPE = 'Iris on Slit' / type of shutter
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET TELE INT = 600. / Interval between two successive te
HIERARCH ESO DET TELE NO = 4 / # of sources active
HIERARCH ESO DET TLM1 END = 153. / Telemetry value at read completion
HIERARCH ESO DET TLM1 ID = 'CCD Sensor1' / ID of telemetry sensor
HIERARCH ESO DET TLM1 NAME = 'CCD T1 ' / Description of telemetry param.
HIERARCH ESO DET TLM1 START = 153. / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 154.5 / Telemetry value at read completion
HIERARCH ESO DET TLM2 ID = 'CCD Sensor2' / ID of telemetry sensor
HIERARCH ESO DET TLM2 NAME = 'CCD T2 ' / Description of telemetry param.
HIERARCH ESO DET TLM2 START = 154.5 / Telemetry value at read start
HIERARCH ESO DET TLM3 END = 286.3 / Telemetry value at read completion
HIERARCH ESO DET TLM3 ID = 'Box Temp' / ID of telemetry sensor
HIERARCH ESO DET TLM3 NAME = 'EBOX T ' / Description of telemetry param.
HIERARCH ESO DET TLM3 START = 286.3 / Telemetry value at read start
HIERARCH ESO DET TLM4 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM4 ID = 'Vacuum ' / ID of telemetry sensor
HIERARCH ESO DET TLM4 NAME = 'Vacuum ' / Description of telemetry param.
HIERARCH ESO DET TLM4 START = 0. / Telemetry value at read start
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 DIT1 = 299.999998 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 300.3642 / Dark current time
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 NX = 2144 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 3000 / # of pixels along Y
HIERARCH ESO DET WIN1 ST = T / If T, window enabled
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 UIT1 = 300. / user defined subintegration time
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO PRO CATG = 'SCI_SLIT_FLUX_MERGE1D_UVB' / Category of pipeline prod
HIERARCH ESO PRO DATANCOM = 1
HIERARCH ESO PRO B RELOFF RA = 4.929452
HIERARCH ESO PRO B RELOFF DEC = 0.836958
HIERARCH ESO PRO B CUMOFF RA = 2.464726
HIERARCH ESO PRO B CUMOFF DEC = 0.418479
HIERARCH ESO PRO RECT BIN LAMBDA = 0.02
HIERARCH ESO PRO RECT BIN SPACE= 0.16
HIERARCH ESO PRO RECT LAMBDA MIN = 298.92
HIERARCH ESO PRO RECT LAMBDA MAX = 589.98
HIERARCH ESO PRO RECT SPACE MIN= -10.2600002289
HIERARCH ESO PRO RECT SPACE MAX= 5.41999959946
HIERARCH ESO PRO EXTRACT SLIT MIN = 0.
HIERARCH ESO PRO EXTRACT SLIT MAX = 0.
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE,SLIT,NODDING' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'xsh_scired_slit_nod' / Pipeline recipe (unique
HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'xsh/1.3.7' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME= 'XSHOO.2012-04-18T02:16:30.990.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG= 'OBJECT_SLIT_NOD_UVB' / Category of raw frame
HIERARCH ESO PRO REC1 RAW2 NAME= 'XSHOO.2012-04-18T02:23:37.805.fits' / File na
HIERARCH ESO PRO REC1 RAW2 CATG= 'OBJECT_SLIT_NOD_UVB' / Category of raw frame
HIERARCH ESO PRO REC1 CAL1 NAME= 'SPECTRAL_FORMAT_TAB_UVB.fits' / File name of
HIERARCH ESO PRO REC1 CAL1 CATG= 'SPECTRAL_FORMAT_TAB_UVB' / Category of calibr
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = 'cb66fee5070f774602aa02e63fb0d6d5' / MD
HIERARCH ESO PRO REC1 CAL2 NAME= 'MASTER_BIAS_UVB_100k.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL2 CATG= 'MASTER_BIAS_UVB' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = 'a73522129e390b015ae9fa88f01adf28' / MD
HIERARCH ESO PRO REC1 CAL3 NAME= 'ORDER_TAB_EDGES_SLIT_UVB.fits' / File name of
HIERARCH ESO PRO REC1 CAL3 CATG= 'ORDER_TAB_EDGES_SLIT_UVB' / Category of calib
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = 'ffb1d5d1c36f37604540bfc96733ebba' / MD
HIERARCH ESO PRO REC1 CAL4 NAME= 'MASTER_FLAT_QTH_SLIT_UVB.fits' / File name of
HIERARCH ESO PRO REC1 CAL4 CATG= 'MASTER_FLAT_SLIT_UVB' / Category of calibrati
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = '1b4314ba491a250b7e514420d0dde07b' / MD
HIERARCH ESO PRO REC1 CAL5 NAME= 'BP_MAP_RP_UVB_REF_1x1.fits' / File name of ca
HIERARCH ESO PRO REC1 CAL5 CATG= 'MASTER_BP_MAP_UVB' / Category of calibration
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = '952bf975aedffc9e1a432ce46f6a7fbd' / MD
HIERARCH ESO PRO REC1 CAL6 NAME= 'DISP_TAB_AFC_UVB.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL6 CATG= 'DISP_TAB_AFC_UVB' / Category of calibration f
HIERARCH ESO PRO REC1 CAL6 DATAMD5 = 'ec05a353f006c1da060b9ffc946063e6' / MD
HIERARCH ESO PRO REC1 CAL7 NAME= 'WAVE_TAB_AFC_UVB.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL7 CATG= 'WAVE_TAB_AFC_UVB' / Category of calibration f
HIERARCH ESO PRO REC1 CAL7 DATAMD5 = 'bf7cf9ee116ccd6a6966650abe58a76a' / MD
HIERARCH ESO PRO REC1 CAL8 NAME= 'RESPONSE_MERGE1D_SLIT_UVB_QTH.fits' / File na
HIERARCH ESO PRO REC1 CAL8 CATG= 'RESPONSE_MERGE1D_SLIT_UVB' / Category of cali
HIERARCH ESO PRO REC1 CAL9 NAME= 'xsh_paranal_extinct_uvb.fits' / File name of
HIERARCH ESO PRO REC1 CAL9 CATG= 'ATMOS_EXT_UVB' / Category of calibration fram
HIERARCH ESO PRO REC1 CAL9 DATAMD5 = '6aea4595776baaa7efc244012254dd9c' / MD
HIERARCH ESO PRO REC1 PARAM1 NAME = 'keep-temp' / If 'no', temporary files
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'no ' / Default: 'no'
HIERARCH ESO PRO REC1 PARAM2 NAME = 'debug-level' / Additional xshooter deb
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM3 NAME = 'test ' / Can be any string, usage d
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM4 NAME = 'time-stamp' / Add timestamp to product
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM5 NAME = 'pre-overscan-corr' / pre-overscan corr
HIERARCH ESO PRO REC1 PARAM5 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM6 NAME = 'background-nb-y' / number of points of
HIERARCH ESO PRO REC1 PARAM6 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM7 NAME = 'background-radius-x' / half size of th
HIERARCH ESO PRO REC1 PARAM7 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM8 NAME = 'background-radius-y' / half size of th
HIERARCH ESO PRO REC1 PARAM8 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM9 NAME = 'background-min-grid-frac' / Minimum fr
HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.3333 ' / Default: 0.3333
HIERARCH ESO PRO REC1 PARAM10 NAME = 'background-grid-frac' / maximum fracti
HIERARCH ESO PRO REC1 PARAM10 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM11 NAME = 'background-method' / method adopted fo
HIERARCH ESO PRO REC1 PARAM11 VALUE = 'poly ' / Default: 'poly'
HIERARCH ESO PRO REC1 PARAM12 NAME = 'background-smooth-x' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM12 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM13 NAME = 'background-smooth-y' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM13 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM14 NAME = 'background-debug' / Generate a table c
HIERARCH ESO PRO REC1 PARAM14 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM15 NAME = 'removecrhsingle-frac-max' / Max fracti
HIERARCH ESO PRO REC1 PARAM15 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM16 NAME = 'removecrhsingle-sigmalim' / Poisson fl
HIERARCH ESO PRO REC1 PARAM16 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM17 NAME = 'removecrhsingle-flim' / Minimum contra
HIERARCH ESO PRO REC1 PARAM17 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM18 NAME = 'removecrhsingle-niter' / Max number of
HIERARCH ESO PRO REC1 PARAM18 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM19 NAME = 'rectify-kernel' / Name of the Interpol
HIERARCH ESO PRO REC1 PARAM19 VALUE = 'default ' / Default: 'default'
HIERARCH ESO PRO REC1 PARAM20 NAME = 'rectify-radius' / Rectify Interpolatio
HIERARCH ESO PRO REC1 PARAM20 VALUE = '1 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM21 NAME = 'rectify-bin-lambda' / Wavelength step
HIERARCH ESO PRO REC1 PARAM21 VALUE = '0.02 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM22 NAME = 'rectify-bin-slit' / Spatial step along
HIERARCH ESO PRO REC1 PARAM22 VALUE = '0.16 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM23 NAME = 'rectify-full-slit' / Use full slit if
HIERARCH ESO PRO REC1 PARAM23 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM24 NAME = 'rectify-conserve-flux' / Use flux cons
HIERARCH ESO PRO REC1 PARAM24 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM25 NAME = 'rectify-fast' / Fast if TRUE (Rect[B-A
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM26 NAME = 'localize-method' / Localization method
HIERARCH ESO PRO REC1 PARAM26 VALUE = 'GAUSSIAN' / Default: 'GAUSSIAN'
HIERARCH ESO PRO REC1 PARAM27 NAME = 'localize-chunk-nb' / Number of chunks
HIERARCH ESO PRO REC1 PARAM27 VALUE = '10 ' / Default: 10
HIERARCH ESO PRO REC1 PARAM28 NAME = 'localize-thresh' / Threshold relative
HIERARCH ESO PRO REC1 PARAM28 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM29 NAME = 'localize-deg-lambda' / Degree in lambd
HIERARCH ESO PRO REC1 PARAM29 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM30 NAME = 'localize-slit-position' / Object posit
HIERARCH ESO PRO REC1 PARAM30 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM31 NAME = 'localize-slit-hheight' / Object half h
HIERARCH ESO PRO REC1 PARAM31 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM32 NAME = 'localize-kappa' / Kappa value for sigm
HIERARCH ESO PRO REC1 PARAM32 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM33 NAME = 'localize-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM33 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM34 NAME = 'localize-use-skymask' / TRUE if we wan
HIERARCH ESO PRO REC1 PARAM34 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM35 NAME = 'localize-nod-throw' / Step (arcsec) be
HIERARCH ESO PRO REC1 PARAM35 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM36 NAME = 'extract-method' / Method used for extr
HIERARCH ESO PRO REC1 PARAM36 VALUE = 'NOD ' / Default: 'NOD'
HIERARCH ESO PRO REC1 PARAM37 NAME = 'mergeord-method' / Method for combinin
HIERARCH ESO PRO REC1 PARAM37 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM38 NAME = 'combinenod-min' / minimum NS size of r
HIERARCH ESO PRO REC1 PARAM38 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM39 NAME = 'combinenod-clip' / TRUE if do sigma cl
HIERARCH ESO PRO REC1 PARAM39 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM40 NAME = 'combinenod-clip-sigma' / Kappa value i
HIERARCH ESO PRO REC1 PARAM40 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM41 NAME = 'combinenod-clip-niter' / Number of ite
HIERARCH ESO PRO REC1 PARAM41 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM42 NAME = 'combinenod-clip-diff' / Minimal change
HIERARCH ESO PRO REC1 PARAM42 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM43 NAME = 'combinenod-throwlist' / Name of ascii
HIERARCH ESO PRO REC1 PARAM43 VALUE = 'throwlist.asc' / Default: 'throwlist.a
HIERARCH ESO PRO REC1 PARAM44 NAME = 'combinenod-method' / Combination metho
HIERARCH ESO PRO REC1 PARAM44 VALUE = 'MEAN ' / Default: 'MEAN'
HIERARCH ESO PRO REC1 PARAM45 NAME = 'max-slit' / Lower Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM45 VALUE = '5.7 ' / Default: 5.7
HIERARCH ESO PRO REC1 PARAM46 NAME = 'min-slit' / Upper Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM46 VALUE = '-5.3 ' / Default: -5.3
HIERARCH ESO PRO REC1 PARAM47 NAME = 'crh-clip-kappa' / Kappa value in sigma
HIERARCH ESO PRO REC1 PARAM47 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM48 NAME = 'crh-clip-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM48 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM49 NAME = 'crh-clip-frac' / Minimal ratio of poin
HIERARCH ESO PRO REC1 PARAM49 VALUE = '0.7 ' / Default: 0.7
HIERARCH ESO PRO REC1 PARAM50 NAME = 'compute-map' / if TRUE recompute (wave
HIERARCH ESO PRO REC1 PARAM50 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM51 NAME = 'do-flatfield' / TRUE if we do the flat
HIERARCH ESO PRO REC1 PARAM51 VALUE = 'true ' / Default: true
HIERARCH ESO ADA ABSROT END = 168.31192 / Abs rot angle at exp end
HIERARCH ESO ADA ABSROT PPOS = 'NEG ' / sign of probe position
HIERARCH ESO ADA ABSROT START = 167.6928 / Abs rot angle at exp start
HIERARCH ESO ADA GUID DEC = -34.57819 / -34:34:41.4 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 236.690434 / 15:46:45.7 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG= 99.63621 / Position angle at start
HIERARCH ESO OCS DET1 IMGNAME = 'XSHOOTER_SLT_OBJ_UVB_' / Data File Name.
HIERARCH ESO SEQ ARM = 'UVB ' / Instrument Arm
HIERARCH ESO SEQ CUMOFF DEC = -0.418479 / Cumulative DEC offset
HIERARCH ESO SEQ CUMOFF RA = -2.464726 / Cumulative RA offset
HIERARCH ESO SEQ CUMOFF X = 0. / Cumulative offset X (along the sli
HIERARCH ESO SEQ CUMOFF Y = 2.5 / Cumulative offset Y (along the sli
HIERARCH ESO SEQ JITTER WIDTH = 0. / Width of the Jitter box (arcsec)
HIERARCH ESO SEQ NOD THROW = 5. / Nodding throw length in arcsec
HIERARCH ESO SEQ RELOFF DEC = -0.418479 / List of DEC offsets
HIERARCH ESO SEQ RELOFF RA = -2.464726 / List of RA offsets
HIERARCH ESO QC NPIXSAT= 0. / Number of saturated pixels
HIERARCH ESO QC FPIXSAT= 0. / Fraction of saturated pixels
HIERARCH ESO QC CRRATE = 0.108265817901 / Number of detected cosmic ray hits
HIERARCH ESO QC NCRH AVG = 449 / Number of detected cosmic ray hits
HIERARCH ESO QC VRAD BARYCOR = 16.6725835789 / Barycentric radial velocity co
HIERARCH ESO QC VRAD HELICOR = 16.6708873074 / Heliocentric radial velocity c
.
HISTORY ESO-DESCRIPTORS START ................
HISTORY 'LHCUTS','R*4',1,4,'5E14.7'
HISTORY 0.0000000E+00 0.0000000E+00 1.1754944E-38 2.9577900E-13
HISTORY
HISTORY 'HIST_BINS','R*4',1,5,'5E14.7'
HISTORY 2.5600000E+02 2.2650238E-17 9.9288050E-15 1.5704616E-14 0.0000000E+00
HISTORY
HISTORY 'HISTOGRAM','I*4',1,256,'7I10'
HISTORY 1 0 0 0 0 0 0
HISTORY 0 2 0 0 0 0 0
HISTORY 1 0 0 1 0 1 0
HISTORY 0 0 0 0 0 0 0
HISTORY 0 0 0 1 0 0 0
HISTORY 0 0 0 0 0 0 0
HISTORY 0 0 0 0 0 0 0
HISTORY 0 0 0 0 0 0 0
HISTORY 0 0 0 0 1 0 0
HISTORY 0 0 0 0 1 0 0
HISTORY 0 0 0 0 0 0 0
HISTORY 0 0 0 1 0 1 0
HISTORY 0 0 0 0 0 0 0
HISTORY 1 0 0 0 1 1 1
HISTORY 0 0 0 0 1 0 2
HISTORY 0 1 0 2 1 0 0
HISTORY 2 0 1 1 0 0 0
HISTORY 2 1 2 0 0 0 0
HISTORY 0 0 0 1 0 1 0
HISTORY 2 0 1 2 2 3 2
HISTORY 0 0 0 0 0 0 5
HISTORY 1 3 2 3 1 2 5
HISTORY 1 1 1 2 2 1 2
HISTORY 1 2 0 2 3 3 0
HISTORY 3 4 1 1 0 2 1
HISTORY 1 1 1 0 1 1 2
HISTORY 3 3 2 2 0 1 4
HISTORY 0 1 2 0 1 1 0
HISTORY 3 1 1 1 0 0 1
HISTORY 1 2 0 0 1 0 2
HISTORY 0 0 1 0 0 0 0
HISTORY 1 0 0 0 1 0 1
HISTORY 0 0 0 0 1 2 0
HISTORY 1 0 0 0 0 0 0
HISTORY 0 1 0 0 0 0 0
HISTORY 0 0 0 0 0 0 0
HISTORY 0 0 1 1
HISTORY
HISTORY 'STATISTIC','R*4',1,12,'5E14.7'
HISTORY 9.9288050E-15 1.5704616E-14 1.3435377E-14 1.0787626E-15-1.0218794E+00
HISTORY 4.7139950E+00 2.0287420E-12 1.3530193E-14 9.9401298E-15 2.5600000E+02
HISTORY 2.2650238E-17 1.3247065E-14
HISTORY
HISTORY 'WINDOW_FROM','I*4',1,1,'7I10'
HISTORY 4980
HISTORY
HISTORY 'WINDOW_TO','I*4',1,1,'7I10'
HISTORY 5130
HISTORY
HISTORY ESO-DESCRIPTORS END ................
.
END
END
#--- sp/Sz71_V.fit
#ext xtension bpx (dim) x2880 extname
#-------------------------------------------------------------------------------
#000 main -32 (24317) 53b [Wavelength=533.66/1019.98(0.02)angst
roms]
#-------------------------------------------------------------------------------
SIMPLE = T / Standard FITS format: NOST 100-2.0
BITPIX = -32 / No. of bits per pixel
NAXIS = 1 / No. of axes in image
NAXIS1 = 24317 / No. of pixels
EXTEND = T / FITS extension may be present
.
CRPIX1 = 1. / Reference pixel
CRVAL1 = 533.66 / Coordinate at reference pixel
CDELT1 = 0.02 / Coord. incr. per pixel (original value)
CTYPE1 = 'LINEAR ' / Units of coordinate
BUNIT = ' ' / Units of data values
DATAMAX = 2.9154335196E-11 / Maximum data value
DATAMIN = 1.17549435082E-38 / Minimum data value
.
ORIGIN = 'ESO-MIDAS' / Written by MIDAS
DATE = '2012-06-18T07:31:58' / [UTC] Date of writing
FILENAME= 'flux_Sz71_VIS_corr_phot.fits' / Original file base-name
MIDASFTP= 'IMAGE ' / MIDAS File Type
.
OBJECT = 'Sz71 ' / MIDAS desc.: IDENT(1)
RA = 236.685665 / MIDAS desc.: O_POS(1)
DEC = -34.51045 / MIDAS desc.: O_POS(2)
EQUINOX = 2000. / MIDAS desc.: O_POS(3)
DATE-OBS= '2012-04-18' / MIDAS desc.: O_TIME(1)
MJD-OBS = 56035.0948625 / MIDAS desc.: O_TIME(4)
TM-START= 8196.120000165 / MIDAS desc.: O_TIME(5)
EXPTIME = 250. / MIDAS desc.: O_TIME(7)
COMMENT NOST 100-2.0: Hanisch,R. et al. 2001, Astron. & Astrophys. 376, 559
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astron
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..35
COMMENT ITS (Flexible Image Transport System) format is defined in 'Astro
COMMENT nd Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..3
COMMENT TS (Flexible Image Transport System) format is defined in 'Astr
COMMENT d Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..
COMMENT S (Flexible Image Transport System) format is defined in 'Ast
COMMENT Astrophysics', volume 376, page 359; bibcode: 2001A&A...376.
COMMENT (Flexible Image Transport System) format is defined in 'As
COMMENT strophysics', volume 376, page 359; bibcode: 2001A&A...376
COMMENT Flexible Image Transport System) format is defined in 'A
COMMENT trophysics', volume 376, page 359; bibcode: 2001A&A...37
COMMENT lexible Image Transport System) format is defined in '
COMMENT rophysics', volume 376, page 359; bibcode: 2001A&A...3
COMMENT exible Image Transport System) format is defined in
COMMENT ophysics', volume 376, page 359; bibcode: 2001A&A...
COMMENT xible Image Transport System) format is defined i
COMMENT physics', volume 376, page 359; bibcode: 2001A&A..
COMMENT ible Image Transport System) format is defined
COMMENT hysics', volume 376, page 359; bibcode: 2001A&A.
COMMENT ble Image Transport System) format is define
COMMENT ysics', volume 376, page 359; bibcode: 2001A&A
COMMENT le Image Transport System) format is defin
COMMENT sics', volume 376, page 359; bibcode: 2001A&
COMMENT e Image Transport System) format is defi
COMMENT ics', volume 376, page 359; bibcode: 2001A
COMMENT Image Transport System) format is def
COMMENT cs', volume 376, page 359; bibcode: 2001
COMMENT mage Transport System) format is de
COMMENT s', volume 376, page 359; bibcode: 200
COMMENT age Transport System) format is d
COMMENT ', volume 376, page 359; bibcode: 20
TELESCOP= 'ESO-VLT-U2' / MIDAS desc.: TELESCOP(1)
INSTRUME= 'XSHOOTER' / MIDAS desc.: INSTRUME(1)
RADECSYS= 'FK5 ' / MIDAS desc.: RADECSYS(1)
OBSERVER= 'UNKNOWN ' / MIDAS desc.: OBSERVER(1)
IRAF-TLM= '2012-06-18T07:31:52' / Time of last modification
UTC = 8191. / 02:16:31.000 UTC at start
LST = 40879.092 / 11:21:19.092 LST at start
PI-COI = 'UNKNOWN ' / PI-COI name.
CHECKSUM= '7S4EAQ1C7Q1CAQ1C' / HDU checksum updated 2012-04-18T02:22:23
DATASUM = '3467291040' / data unit checksum updated 2012-04-18T02:22:23
DATAMD5 = 'f875d4693e4eaafd6e51e2db1e47b09e' / MD5 checksum
PIPEFILE= 'SCI_SLIT_FLUX_MERGE1D_VIS.fits' / Filename of data product
APNUM1 = '1 1 '
DC-FLAG = 0
WCSDIM = 1
CD1_1 = 0.02
LTM1_1 = 1.
WAT0_001= 'system=equispec'
WAT1_001= 'wtype=linear label=Wavelength units=angstroms'
HIERARCH ESO OBS AIRM = 5. / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 2. / Req. max. seeing
HIERARCH ESO OBS AMBI TRANS = '2CLR ' / Req. sky transparency
HIERARCH ESO OBS ATM = 'NATM ' / Req. Atmospheric Turbulence Model
HIERARCH ESO OBS CONTAINER ID = -999 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE= 'U ' / Scheduling container type
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.12' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 1292 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 200230036 / Observation block ID
HIERARCH ESO OBS MOON DIST = 30 / Req. min. angular dist. from moon
HIERARCH ESO OBS MOON FLI = 1. / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'Sz71 ' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 0 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '089.C-0143(A)' / ESO program identification
HIERARCH ESO OBS START = '2012-04-18T02:10:58' / OB start time
HIERARCH ESO OBS STREHLRATIO = 0. / Req. strehl ratio
HIERARCH ESO OBS TARG NAME = 'Sz71 ' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TWILIGHT = 0 / Req. twilight
HIERARCH ESO OBS WATERVAPOUR = 0. / Req. water vapour
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 2 / Exposure number within template
HIERARCH ESO TPL ID = 'XSHOOTER_slt_obs_AutoNodOnSlit' / Template signa
HIERARCH ESO TPL NAME = 'XSHOOTER observations with AutoNodOnSlit offset'
HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ= 'XSHOOTER_obs_AutoNodOnSlit.seq' / Sequencer scri
HIERARCH ESO TPL START = '2012-04-18T02:16:00' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 213208 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.809 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.867 / Airmass at start
HIERARCH ESO TEL ALT = 32.3 / Alt angle at start
HIERARCH ESO TEL AMBI FWHM END = 0.57 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START = 0.63 / Observatory Seeing queried
HIERARCH ESO TEL AMBI PRES END = 745.27 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START = 745.28 / Observatory ambient air pr
HIERARCH ESO TEL AMBI RHUM = 21. / Observatory ambient relative humid
HIERARCH ESO TEL AMBI TAU0 = 0.0052 / Average coherence time
HIERARCH ESO TEL AMBI TEMP = 13.29 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR = 34.5 / Observatory ambient wind direction
HIERARCH ESO TEL AMBI WINDSP = 6.3 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 296.636 / Az angle at start S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.557 / Focal length
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale
HIERARCH ESO TEL FOCU VALUE = 0.596 / M2 setting
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT= -24.6272 / Tel geo latitute (+=North)
HIERARCH ESO TEL GEOLON= -70.4048 / Tel geo longitude (+=East)
HIERARCH ESO TEL IA FWHM = 0.63 / Delivered seeing corrected by airm
HIERARCH ESO TEL IA FWHMLIN = 0.76 / Delivered seeing on IA detector (l
HIERARCH ESO TEL IA FWHMLINOBS = 1.08 / Delivered seeing on IA detector (l
HIERARCH ESO TEL ID = 'v 4.4 ' / TCS version number
HIERARCH ESO TEL MOON DEC = 2.12229 / 02:07:20.2 DEC (J2000)
HIERARCH ESO TEL MOON RA = 351.631051 / 23:26:31.4 RA (J2000)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = -98.696 / Parallactic angle at end
HIERARCH ESO TEL PARANG START = -99.394 / Parallactic angle at start
HIERARCH ESO TEL TARG ALPHA = 154644.73 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = -343035.5 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Ju
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 12.28 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO INS ADC1 DEC = -343254.25148 / Telescope desclination [deg].
HIERARCH ESO INS ADC1 END = 122.102 / Position angle at end [deg].
HIERARCH ESO INS ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 154734.403241 / Telescope right ascension [deg]
HIERARCH ESO INS ADC2 DEC = -343254.25148 / Telescope desclination [deg].
HIERARCH ESO INS ADC2 END = 243.39 / Position angle at end [deg].
HIERARCH ESO INS ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 154734.403241 / Telescope right ascension [deg]
HIERARCH ESO INS ADC3 DEC = -343254.25148 / Telescope desclination [deg].
HIERARCH ESO INS ADC3 ENCSTART = 23480 / ADC encoder value at exposure star
HIERARCH ESO INS ADC3 END = 120.736 / Position angle at end [deg].
HIERARCH ESO INS ADC3 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC3 RA = 154734.403241 / Telescope right ascension [deg]
HIERARCH ESO INS ADC4 DEC = -343254.25148 / Telescope desclination [deg].
HIERARCH ESO INS ADC4 ENCSTART = 47813 / ADC encoder value at exposure star
HIERARCH ESO INS ADC4 END = 233.328 / Position angle at end [deg].
HIERARCH ESO INS ADC4 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC4 RA = 154734.403241 / Telescope right ascension [deg]
HIERARCH ESO INS DATE = '2005-04-01' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.XSHOOTER_ICS-0.78' / Data dictionary
HIERARCH ESO INS FILT1 ID = 'PS11 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'I ' / Filter name.
HIERARCH ESO INS FILT1 NO = 11 / Filter wheel position index.
HIERARCH ESO INS FOCU1 ENC = 26884 / Absolute position [Enc].
HIERARCH ESO INS FOCU1 POS = 13.7 / Position [C].
HIERARCH ESO INS FOCU2 ENC = 11750 / Absolute position [Enc].
HIERARCH ESO INS FOCU2 POS = 0. / Position [C].
HIERARCH ESO INS ID = 'XSHOOTER/1.60' / Instrument ID.
HIERARCH ESO INS MIRR1 ID = 'Tel ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'Tel ' / Mirror name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS MODE = 'SLITSPEC' / Instrument mode used.
HIERARCH ESO INS OPTI2 ID = 'SLOT ' / OPTIi unique ID.
HIERARCH ESO INS OPTI2 NAME = 'SLOT ' / OPTIi name.
HIERARCH ESO INS OPTI2 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI2 TYPE = 'MIRROR ' / OPTIi element.
HIERARCH ESO INS OPTI3 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI3 NAME = '1.0x11 ' / OPTIi name.
HIERARCH ESO INS OPTI3 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI3 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI4 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI4 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI4 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI4 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI5 ID = 'PS3 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI5 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI5 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI5 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS PATH = 'SLITSPEC' / Optical path used.
HIERARCH ESO INS SENS21 ID = 'CA1F1 ' / sensor ID.
HIERARCH ESO INS SENS21 NAME = 'Cab.1 Flow rate' / sensor common name.
HIERARCH ESO INS SENS21 VAL = 57. / Cab. 1 Flow rate [l/h]
HIERARCH ESO INS SENS60 ID = 'NPM ' / sensor ID.
HIERARCH ESO INS SENS60 NAME = 'NIR cryo. P' / sensor common name.
HIERARCH ESO INS SENS60 VAL = 0.000172 / NIR Pressure [mbar]
HIERARCH ESO INS SENS81 ID = 'RANGE ' / sensor ID.
HIERARCH ESO INS SENS81 NAME = 'Heater Range' / sensor common name.
HIERARCH ESO INS SENS81 VAL = 4. / Lake 340 Heater Range
HIERARCH ESO INS SENS82 ID = 'HEATR ' / sensor ID.
HIERARCH ESO INS SENS82 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS SENS82 VAL = 47.9 / Lake 340 Heater output
HIERARCH ESO INS SHUT1 ID = 'INSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Instrument shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP1 ID = 'TMUC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'UVB Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 13.91 / UVB Camera temp. [C]
HIERARCH ESO INS TEMP10 ID = 'TMA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP10 NAME = 'Ambient temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP10 VAL = 13.91 / Ambient temp. [C]
HIERARCH ESO INS TEMP11 ID = 'TMADC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'BB UVB ADC temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 15.84 / BB UVB ADC temp. [C]
HIERARCH ESO INS TEMP2 ID = 'TMUP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'UVB Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 13.66 / UVB Prism temp. [C]
HIERARCH ESO INS TEMP21 ID = 'CA1OT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP21 NAME = 'Cab.1 outlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP21 VAL = 12.06 / Cab. 1 outlet temp. [C]
HIERARCH ESO INS TEMP22 ID = 'CA1IT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP22 NAME = 'Cab.1 inlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP22 VAL = 8.74 / Cab. 1 inlet temp. [C]
HIERARCH ESO INS TEMP23 ID = 'CA1CT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP23 NAME = 'Cab.1 temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP23 VAL = 17.56 / Cab. 1 temp. [C]
HIERARCH ESO INS TEMP24 ID = 'CA1AT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP24 NAME = 'Cab.1 Amb. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP24 VAL = 14.27 / Cab. 1 Amb. temp. [C]
HIERARCH ESO INS TEMP3 ID = 'TMUB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'UVB bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 13.91 / UVB bench temp. [C]
HIERARCH ESO INS TEMP4 ID = 'TMVC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'VIS Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 12.72 / VIS Camera temp. [C]
HIERARCH ESO INS TEMP5 ID = 'TMVP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP5 NAME = 'VIS Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP5 VAL = 13.1 / VIS Prism temp. [C]
HIERARCH ESO INS TEMP6 ID = 'TMVB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP6 NAME = 'VIS bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP6 VAL = 13.36 / VIS bench temp. [C]
HIERARCH ESO INS TEMP7 ID = 'TMUCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP7 NAME = 'UVB cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP7 VAL = 6.17 / UVB cryo. temp. [C]
HIERARCH ESO INS TEMP8 ID = 'TMVCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP8 NAME = 'VIS cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP8 VAL = 12.42 / VIS cryo. temp. [C]
HIERARCH ESO INS TEMP80 ID = 'OBCT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP80 NAME = 'OB Cover Tel.' / Temperature sensor name.
HIERARCH ESO INS TEMP80 VAL = 103.87 / OB Cover Telescope [K]
HIERARCH ESO INS TEMP81 ID = 'OBCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP81 NAME = 'OB Cover Tank' / Temperature sensor name.
HIERARCH ESO INS TEMP81 VAL = 103.93 / OB Cover Tank [K]
HIERARCH ESO INS TEMP82 ID = 'OBPR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP82 NAME = 'OB Prism1' / Temperature sensor name.
HIERARCH ESO INS TEMP82 VAL = 103.32 / OB Prism1 [K]
HIERARCH ESO INS TEMP83 ID = 'OBCL ' / Temperature sensor ID.
HIERARCH ESO INS TEMP83 NAME = 'OB Corrector Lens' / Temperature sensor name.
HIERARCH ESO INS TEMP83 VAL = 104.12 / OB Corrector Lens [K]
HIERARCH ESO INS TEMP84 ID = 'CP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP84 NAME = 'Cryo. Cold Plate' / Temperature sensor name.
HIERARCH ESO INS TEMP84 VAL = 75.3 / Cryostat Cold Plate [K]
HIERARCH ESO INS TEMP85 ID = 'RS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP85 NAME = 'Cryo. rad. shield' / Temperature sensor name.
HIERARCH ESO INS TEMP85 VAL = 99.274 / Cryostat rad. shield [K]
HIERARCH ESO INS TEMP86 ID = 'DCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP86 NAME = 'CCD Copper bar' / Temperature sensor name.
HIERARCH ESO INS TEMP86 VAL = 76.755 / CCD Copper bar [K]
HIERARCH ESO INS TEMP9 ID = 'TMNCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP9 NAME = 'NIR cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP9 VAL = 14.47 / NIR cryo. temp. [C]
HIERARCH ESO INS TEMP90 ID = 'NHT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP90 NAME = 'NIR Head temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP90 VAL = 79.001 / NIR Head temp. [K]
HIERARCH ESO INS TILT1 AFCX = 0.45 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT1 AFCY = -0.345 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT1 CONVX = 0.208 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT1 CONVY = 0.269 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT1 ENGX = 5.497 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT1 ENGY = 2.376 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT1 ID = 'afcs1 ' / AFCS ID.
HIERARCH ESO INS TILT1 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT1 NAME = 'Flexure comp. UVB' / AFCS description.
HIERARCH ESO INS TILT1 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT1 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT1 POSXEND = 0.496 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSXSTART = 0.459 / Piezo position at start in
HIERARCH ESO INS TILT1 POSYEND = -2.627 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSYSTART = -2.738 / Piezo position at start in
HIERARCH ESO INS TILT1 REFRACXEND = 1.029 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT1 REFRACXST = 0.872 / Atm. refr. corr. start in
HIERARCH ESO INS TILT1 REFRACYEND = -1.778 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT1 REFRACYST = -1.786 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 AFCX = -0.338 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT2 AFCY = 0.307 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT2 CONVX = 0.291 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT2 CONVY = 0.384 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT2 ENGX = 4.626 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT2 ENGY = 7.307 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT2 ID = 'afcs2 ' / AFCS ID.
HIERARCH ESO INS TILT2 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT2 NAME = 'Flexure comp. VIS' / AFCS description.
HIERARCH ESO INS TILT2 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT2 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT2 POSXEND = -0.376 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSXSTART = -0.346 / Piezo position at start in
HIERARCH ESO INS TILT2 POSYEND = 2.308 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSYSTART = 2.404 / Piezo position at start in
HIERARCH ESO INS TILT2 REFRACXEND = -1.067 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT2 REFRACXST = -0.889 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 REFRACYEND = 1.817 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT2 REFRACYST = 1.826 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 AFCX = 0.034 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT3 AFCY = 0.225 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT3 CONVX = 0.58 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT3 CONVY = 0.56 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT3 ENGX = 7.544 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT3 ENGY = 5.276 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT3 ID = 'afcs3 ' / AFCS ID.
HIERARCH ESO INS TILT3 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT3 NAME = 'Flexure comp. NIR' / AFCS description.
HIERARCH ESO INS TILT3 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT3 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT3 POSXEND = 2.541 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSXSTART = 2.662 / Piezo position at start in
HIERARCH ESO INS TILT3 POSYEND = 0.266 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSYSTART = 0.233 / Piezo position at start in
HIERARCH ESO INS TILT3 REFRACXEND = -1.183 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT3 REFRACXST = -0.948 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 REFRACYEND = 1.933 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT3 REFRACYST = 1.942 / Atm. refr. corr. start in
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET CHIP1 DATE = '2005-04-22' / Date of installation [YYYY-MM-DD
HIERARCH ESO DET CHIP1 ID = 'Catherine' / Detector chip identification
HIERARCH ESO DET CHIP1 INDEX = 1 / Chip index
HIERARCH ESO DET CHIP1 NAME = 'MIT/LL CCID-20' / Detector chip name
HIERARCH ESO DET CHIP1 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP1 NY = 4102 / # of pixels along Y
HIERARCH ESO DET CHIP1 PSZX = 15. / Size of pixel in X
HIERARCH ESO DET CHIP1 PSZY = 15. / Size of pixel in Y
HIERARCH ESO DET CHIP1 X = 1 / X location in array
HIERARCH ESO DET CHIP1 XGAP = 0. / Gap between chips along x
HIERARCH ESO DET CHIP1 Y = 1 / Y location in array
HIERARCH ESO DET CHIP1 YGAP = 0. / Gap between chips along y
HIERARCH ESO DET CHIPS = 1 / # of chips in detector array
HIERARCH ESO DET DATE = '2005-22-04' / Installation date
HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET EXP NO= 351 / Unique exposure ID number
HIERARCH ESO DET EXP RDTTIME = 89.086 / image readout time
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP XFERTIM = 89.101 / image transfer time
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id
HIERARCH ESO DET NAME = 'shdetv - shdetv' / Name of detector system
HIERARCH ESO DET OUT1 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT1 CONAD = 0.6 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT1 GAIN = 1.67 / Conversion from electrons to ADU
HIERARCH ESO DET OUT1 ID = 'A ' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 INDEX = 1 / Output index
HIERARCH ESO DET OUT1 NAME = 'A ' / Description of output
HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X
HIERARCH ESO DET OUT1 NY = 4000 / valid pixels along Y
HIERARCH ESO DET OUT1 OVSCX = 48 / Overscan region in X
HIERARCH ESO DET OUT1 OVSCY = 0 / Overscan region in Y
HIERARCH ESO DET OUT1 PRSCX = 10 / Prescan region in X
HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT1 RON = 3.2 / Readout noise per output (e-)
HIERARCH ESO DET OUT1 X= 1 / X location of output
HIERARCH ESO DET OUT1 Y= 1 / Y location of output
HIERARCH ESO DET OUTPUTS = 1 / # of outputs
HIERARCH ESO DET OUTREF= 0 / reference output
HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET READ CLOCK = '100k/1pt/hg' / Readout clock pattern used
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin
HIERARCH ESO DET READ SPEED = '1pt/100k/hg' / Readout speed
HIERARCH ESO DET SHUT ID = 'VA 25mm BistableCCD Sensor1' / Shutter unique
HIERARCH ESO DET SHUT TMCLOS = 0. / Time taken to close shutter
HIERARCH ESO DET SHUT TMOPEN = 0. / Time taken to open shutter
HIERARCH ESO DET SHUT TYPE = 'Iris on Slit' / type of shutter
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET TELE INT = 600. / Interval between two successive te
HIERARCH ESO DET TELE NO = 4 / # of sources active
HIERARCH ESO DET TLM1 END = 135. / Telemetry value at read completion
HIERARCH ESO DET TLM1 ID = 'CCD Sensor1' / ID of telemetry sensor
HIERARCH ESO DET TLM1 NAME = 'CCD T1 ' / Description of telemetry param.
HIERARCH ESO DET TLM1 START = 135. / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 142.9 / Telemetry value at read completion
HIERARCH ESO DET TLM2 ID = 'CCD Sensor2' / ID of telemetry sensor
HIERARCH ESO DET TLM2 NAME = 'CCD T2 ' / Description of telemetry param.
HIERARCH ESO DET TLM2 START = 142.9 / Telemetry value at read start
HIERARCH ESO DET TLM3 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM3 ID = 'Box Temp' / ID of telemetry sensor
HIERARCH ESO DET TLM3 NAME = 'EBOX T ' / Description of telemetry param.
HIERARCH ESO DET TLM3 START = 0. / Telemetry value at read start
HIERARCH ESO DET TLM4 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM4 ID = 'Vacuum ' / ID of telemetry sensor
HIERARCH ESO DET TLM4 NAME = 'Vacuum ' / Description of telemetry param.
HIERARCH ESO DET TLM4 START = 0. / Telemetry value at read start
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 DIT1 = 250.000003 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 250.3671 / Dark current time
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 NX = 2106 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 4000 / # of pixels along Y
HIERARCH ESO DET WIN1 ST = T / If T, window enabled
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 UIT1 = 250. / user defined subintegration time
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO PRO CATG = 'SCI_SLIT_FLUX_MERGE1D_VIS' / Category of pipeline prod
HIERARCH ESO PRO DATANCOM = 1
HIERARCH ESO PRO B RELOFF RA = 4.929452
HIERARCH ESO PRO B RELOFF DEC = 0.836958
HIERARCH ESO PRO B CUMOFF RA = 2.464726
HIERARCH ESO PRO B CUMOFF DEC = 0.418479
HIERARCH ESO PRO RECT BIN LAMBDA = 0.02
HIERARCH ESO PRO RECT BIN SPACE= 0.16
HIERARCH ESO PRO RECT LAMBDA MIN = 533.66
HIERARCH ESO PRO RECT LAMBDA MAX = 1019.98
HIERARCH ESO PRO RECT SPACE MIN= -10.2600002289
HIERARCH ESO PRO RECT SPACE MAX= 5.41999959946
HIERARCH ESO PRO EXTRACT SLIT MIN = 0.
HIERARCH ESO PRO EXTRACT SLIT MAX = 0.
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE,SLIT,NODDING' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'xsh_scired_slit_nod' / Pipeline recipe (unique
HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'xsh/1.3.7' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME= 'XSHOO.2012-04-18T02:16:36.120.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW2 NAME= 'XSHOO.2012-04-18T02:23:42.975.fits' / File na
HIERARCH ESO PRO REC1 RAW2 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 CAL1 NAME= 'SPECTRAL_FORMAT_TAB_VIS.fits' / File name of
HIERARCH ESO PRO REC1 CAL1 CATG= 'SPECTRAL_FORMAT_TAB_VIS' / Category of calibr
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = '9b447dab81b23bf0fbccda78f6fdc79d' / MD
HIERARCH ESO PRO REC1 CAL2 NAME= 'MASTER_BIAS_VIS_100k.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL2 CATG= 'MASTER_BIAS_VIS' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '2dd04bace4ae311682f7e30ee4532f89' / MD
HIERARCH ESO PRO REC1 CAL3 NAME= 'ORDER_TAB_EDGES_SLIT_VIS.fits' / File name of
HIERARCH ESO PRO REC1 CAL3 CATG= 'ORDER_TAB_EDGES_SLIT_VIS' / Category of calib
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = 'e7e9817af1b8717d0c6068d7d1e0179b' / MD
HIERARCH ESO PRO REC1 CAL4 NAME= 'MASTER_FLAT_SLIT_VIS.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL4 CATG= 'MASTER_FLAT_SLIT_VIS' / Category of calibrati
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = 'e2daa0eb5e4348cfa20ef47f8a767994' / MD
HIERARCH ESO PRO REC1 CAL5 NAME= 'BP_MAP_RP_VIS_REF_1x1.fits' / File name of ca
HIERARCH ESO PRO REC1 CAL5 CATG= 'MASTER_BP_MAP_VIS' / Category of calibration
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = 'f6743ea948006ad37d5bc7470b1f8242' / MD
HIERARCH ESO PRO REC1 CAL6 NAME= 'DISP_TAB_AFC_VIS.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL6 CATG= 'DISP_TAB_AFC_VIS' / Category of calibration f
HIERARCH ESO PRO REC1 CAL6 DATAMD5 = 'fa34c6c6f021f30a7edd00537b3e49fc' / MD
HIERARCH ESO PRO REC1 CAL7 NAME= 'WAVE_TAB_AFC_VIS.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL7 CATG= 'WAVE_TAB_AFC_VIS' / Category of calibration f
HIERARCH ESO PRO REC1 CAL7 DATAMD5 = '87b7fc5fd83b0a3a06dca3821bcc1bc3' / MD
HIERARCH ESO PRO REC1 CAL8 NAME= 'RESPONSE_MERGE1D_SLIT_VIS.fits' / File name o
HIERARCH ESO PRO REC1 CAL8 CATG= 'RESPONSE_MERGE1D_SLIT_VIS' / Category of cali
HIERARCH ESO PRO REC1 CAL8 DATAMD5 = 'e5b20bf633955b949b383772ab09b7b8' / MD
HIERARCH ESO PRO REC1 CAL9 NAME= 'xsh_paranal_extinct_vis.fits' / File name of
HIERARCH ESO PRO REC1 CAL9 CATG= 'ATMOS_EXT_VIS' / Category of calibration fram
HIERARCH ESO PRO REC1 CAL9 DATAMD5 = '6aea4595776baaa7efc244012254dd9c' / MD
HIERARCH ESO PRO REC1 PARAM1 NAME = 'keep-temp' / If 'no', temporary files
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'no ' / Default: 'no'
HIERARCH ESO PRO REC1 PARAM2 NAME = 'debug-level' / Additional xshooter deb
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM3 NAME = 'test ' / Can be any string, usage d
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM4 NAME = 'time-stamp' / Add timestamp to product
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM5 NAME = 'pre-overscan-corr' / pre-overscan corr
HIERARCH ESO PRO REC1 PARAM5 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM6 NAME = 'background-nb-y' / number of points of
HIERARCH ESO PRO REC1 PARAM6 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM7 NAME = 'background-radius-x' / half size of th
HIERARCH ESO PRO REC1 PARAM7 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM8 NAME = 'background-radius-y' / half size of th
HIERARCH ESO PRO REC1 PARAM8 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM9 NAME = 'background-min-grid-frac' / Minimum fr
HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.3333 ' / Default: 0.3333
HIERARCH ESO PRO REC1 PARAM10 NAME = 'background-grid-frac' / maximum fracti
HIERARCH ESO PRO REC1 PARAM10 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM11 NAME = 'background-method' / method adopted fo
HIERARCH ESO PRO REC1 PARAM11 VALUE = 'poly ' / Default: 'poly'
HIERARCH ESO PRO REC1 PARAM12 NAME = 'background-smooth-x' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM12 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM13 NAME = 'background-smooth-y' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM13 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM14 NAME = 'background-debug' / Generate a table c
HIERARCH ESO PRO REC1 PARAM14 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM15 NAME = 'removecrhsingle-frac-max' / Max fracti
HIERARCH ESO PRO REC1 PARAM15 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM16 NAME = 'removecrhsingle-sigmalim' / Poisson fl
HIERARCH ESO PRO REC1 PARAM16 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM17 NAME = 'removecrhsingle-flim' / Minimum contra
HIERARCH ESO PRO REC1 PARAM17 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM18 NAME = 'removecrhsingle-niter' / Max number of
HIERARCH ESO PRO REC1 PARAM18 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM19 NAME = 'rectify-kernel' / Name of the Interpol
HIERARCH ESO PRO REC1 PARAM19 VALUE = 'default ' / Default: 'default'
HIERARCH ESO PRO REC1 PARAM20 NAME = 'rectify-radius' / Rectify Interpolatio
HIERARCH ESO PRO REC1 PARAM20 VALUE = '1 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM21 NAME = 'rectify-bin-lambda' / Wavelength step
HIERARCH ESO PRO REC1 PARAM21 VALUE = '0.02 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM22 NAME = 'rectify-bin-slit' / Spatial step along
HIERARCH ESO PRO REC1 PARAM22 VALUE = '0.16 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM23 NAME = 'rectify-full-slit' / Use full slit if
HIERARCH ESO PRO REC1 PARAM23 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM24 NAME = 'rectify-conserve-flux' / Use flux cons
HIERARCH ESO PRO REC1 PARAM24 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM25 NAME = 'rectify-fast' / Fast if TRUE (Rect[B-A
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM26 NAME = 'localize-method' / Localization method
HIERARCH ESO PRO REC1 PARAM26 VALUE = 'GAUSSIAN' / Default: 'GAUSSIAN'
HIERARCH ESO PRO REC1 PARAM27 NAME = 'localize-chunk-nb' / Number of chunks
HIERARCH ESO PRO REC1 PARAM27 VALUE = '10 ' / Default: 10
HIERARCH ESO PRO REC1 PARAM28 NAME = 'localize-thresh' / Threshold relative
HIERARCH ESO PRO REC1 PARAM28 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM29 NAME = 'localize-deg-lambda' / Degree in lambd
HIERARCH ESO PRO REC1 PARAM29 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM30 NAME = 'localize-slit-position' / Object posit
HIERARCH ESO PRO REC1 PARAM30 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM31 NAME = 'localize-slit-hheight' / Object half h
HIERARCH ESO PRO REC1 PARAM31 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM32 NAME = 'localize-kappa' / Kappa value for sigm
HIERARCH ESO PRO REC1 PARAM32 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM33 NAME = 'localize-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM33 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM34 NAME = 'localize-use-skymask' / TRUE if we wan
HIERARCH ESO PRO REC1 PARAM34 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM35 NAME = 'localize-nod-throw' / Step (arcsec) be
HIERARCH ESO PRO REC1 PARAM35 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM36 NAME = 'extract-method' / Method used for extr
HIERARCH ESO PRO REC1 PARAM36 VALUE = 'NOD ' / Default: 'NOD'
HIERARCH ESO PRO REC1 PARAM37 NAME = 'mergeord-method' / Method for combinin
HIERARCH ESO PRO REC1 PARAM37 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM38 NAME = 'combinenod-min' / minimum NS size of r
HIERARCH ESO PRO REC1 PARAM38 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM39 NAME = 'combinenod-clip' / TRUE if do sigma cl
HIERARCH ESO PRO REC1 PARAM39 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM40 NAME = 'combinenod-clip-sigma' / Kappa value i
HIERARCH ESO PRO REC1 PARAM40 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM41 NAME = 'combinenod-clip-niter' / Number of ite
HIERARCH ESO PRO REC1 PARAM41 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM42 NAME = 'combinenod-clip-diff' / Minimal change
HIERARCH ESO PRO REC1 PARAM42 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM43 NAME = 'combinenod-throwlist' / Name of ascii
HIERARCH ESO PRO REC1 PARAM43 VALUE = 'throwlist.asc' / Default: 'throwlist.a
HIERARCH ESO PRO REC1 PARAM44 NAME = 'combinenod-method' / Combination metho
HIERARCH ESO PRO REC1 PARAM44 VALUE = 'MEAN ' / Default: 'MEAN'
HIERARCH ESO PRO REC1 PARAM45 NAME = 'max-slit' / Lower Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM45 VALUE = '5.7 ' / Default: 5.7
HIERARCH ESO PRO REC1 PARAM46 NAME = 'min-slit' / Upper Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM46 VALUE = '-5.3 ' / Default: -5.3
HIERARCH ESO PRO REC1 PARAM47 NAME = 'crh-clip-kappa' / Kappa value in sigma
HIERARCH ESO PRO REC1 PARAM47 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM48 NAME = 'crh-clip-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM48 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM49 NAME = 'crh-clip-frac' / Minimal ratio of poin
HIERARCH ESO PRO REC1 PARAM49 VALUE = '0.7 ' / Default: 0.7
HIERARCH ESO PRO REC1 PARAM50 NAME = 'compute-map' / if TRUE recompute (wave
HIERARCH ESO PRO REC1 PARAM50 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM51 NAME = 'do-flatfield' / TRUE if we do the flat
HIERARCH ESO PRO REC1 PARAM51 VALUE = 'true ' / Default: true
HIERARCH ESO ADA ABSROT END = 168.40085 / Abs rot angle at exp end
HIERARCH ESO ADA ABSROT PPOS = 'NEG ' / sign of probe position
HIERARCH ESO ADA ABSROT START = 167.70282 / Abs rot angle at exp start
HIERARCH ESO ADA GUID DEC = -34.57819 / -34:34:41.4 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 236.690434 / 15:46:45.7 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG= 99.63621 / Position angle at start
HIERARCH ESO OCS DET2 IMGNAME = 'XSHOOTER_SLT_OBJ_VIS_' / Data File Name.
HIERARCH ESO SEQ ARM = 'VIS ' / Instrument Arm
HIERARCH ESO SEQ CUMOFF DEC = -0.418479 / Cumulative DEC offset
HIERARCH ESO SEQ CUMOFF RA = -2.464726 / Cumulative RA offset
HIERARCH ESO SEQ CUMOFF X = 0. / Cumulative offset X (along the sli
HIERARCH ESO SEQ CUMOFF Y = 2.5 / Cumulative offset Y (along the sli
HIERARCH ESO SEQ JITTER WIDTH = 0. / Width of the Jitter box (arcsec)
HIERARCH ESO SEQ NOD THROW = 5. / Nodding throw length in arcsec
HIERARCH ESO SEQ RELOFF DEC = -0.418479 / List of DEC offsets
HIERARCH ESO SEQ RELOFF RA = -2.464726 / List of RA offsets
HIERARCH ESO QC NPIXSAT= 0. / Number of saturated pixels
HIERARCH ESO QC FPIXSAT= 0. / Fraction of saturated pixels
HIERARCH ESO QC CRRATE = 0.185112847222 / Number of detected cosmic ray hits
HIERARCH ESO QC NCRH AVG = 853 / Number of detected cosmic ray hits
HIERARCH ESO QC VRAD BARYCOR = 16.6725082346 / Barycentric radial velocity co
HIERARCH ESO QC VRAD HELICOR = 16.6708119641 / Heliocentric radial velocity c
.
HISTORY ESO-DESCRIPTORS START ................
HISTORY 'LHCUTS','R*4',1,4,'5E14.7'
HISTORY 0.0000000E+00 0.0000000E+00 1.1754944E-38 2.9154335E-11
HISTORY
HISTORY ESO-DESCRIPTORS END ................
.
END
END