The header of the FITS file is listed below,
followed by a sample of values (limited to 1000 lines).
#--- sp/Sz73_V.fit
#ext xtension bpx (dim) x2880 extname
#-------------------------------------------------------------------------------
#000 main -32 (24317) 53b [Wavelength=533.66/1019.98(0.02)angst
roms]
#-------------------------------------------------------------------------------
SIMPLE = T / Standard FITS format: NOST 100-2.0
BITPIX = -32 / No. of bits per pixel
NAXIS = 1 / No. of axes in image
NAXIS1 = 24317 / No. of pixels
EXTEND = T / FITS extension may be present
.
CRPIX1 = 1. / Reference pixel
CRVAL1 = 533.66 / Coordinate at reference pixel
CDELT1 = 0.02 / Coord. incr. per pixel (original value)
CTYPE1 = 'LINEAR ' / Units of coordinate
BUNIT = ' ' / Units of data values
DATAMAX = 1.85416487719E-10 / Maximum data value
DATAMIN = 1.17549435082E-38 / Minimum data value
.
ORIGIN = 'ESO-MIDAS' / Written by MIDAS
DATE = '2012-06-18T07:36:55' / [UTC] Date of writing
FILENAME= 'flux_Sz73_VIS_corr_phot.fits' / Original file base-name
MIDASFTP= 'IMAGE ' / MIDAS File Type
.
OBJECT = 'Sz73 ' / MIDAS desc.: IDENT(1)
RA = 236.987184 / MIDAS desc.: O_POS(1)
DEC = -35.24227 / MIDAS desc.: O_POS(2)
EQUINOX = 2000. / MIDAS desc.: O_POS(3)
DATE-OBS= '2012-04-18' / MIDAS desc.: O_TIME(1)
MJD-OBS = 56035.29225507 / MIDAS desc.: O_TIME(4)
TM-START= 25250.83813432 / MIDAS desc.: O_TIME(5)
EXPTIME = 250. / MIDAS desc.: O_TIME(7)
COMMENT NOST 100-2.0: Hanisch,R. et al. 2001, Astron. & Astrophys. 376, 559
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astronomy
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..359H
COMMENT FITS (Flexible Image Transport System) format is defined in 'Astron
COMMENT and Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..35
COMMENT ITS (Flexible Image Transport System) format is defined in 'Astro
COMMENT nd Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..3
COMMENT TS (Flexible Image Transport System) format is defined in 'Astr
COMMENT d Astrophysics', volume 376, page 359; bibcode: 2001A&A...376..
COMMENT S (Flexible Image Transport System) format is defined in 'Ast
COMMENT Astrophysics', volume 376, page 359; bibcode: 2001A&A...376.
COMMENT (Flexible Image Transport System) format is defined in 'As
COMMENT strophysics', volume 376, page 359; bibcode: 2001A&A...376
COMMENT Flexible Image Transport System) format is defined in 'A
COMMENT trophysics', volume 376, page 359; bibcode: 2001A&A...37
COMMENT lexible Image Transport System) format is defined in '
COMMENT rophysics', volume 376, page 359; bibcode: 2001A&A...3
COMMENT exible Image Transport System) format is defined in
COMMENT ophysics', volume 376, page 359; bibcode: 2001A&A...
COMMENT xible Image Transport System) format is defined i
COMMENT physics', volume 376, page 359; bibcode: 2001A&A..
COMMENT ible Image Transport System) format is defined
COMMENT hysics', volume 376, page 359; bibcode: 2001A&A.
COMMENT ble Image Transport System) format is define
COMMENT ysics', volume 376, page 359; bibcode: 2001A&A
COMMENT le Image Transport System) format is defin
COMMENT sics', volume 376, page 359; bibcode: 2001A&
COMMENT e Image Transport System) format is defi
COMMENT ics', volume 376, page 359; bibcode: 2001A
COMMENT Image Transport System) format is def
COMMENT cs', volume 376, page 359; bibcode: 2001
COMMENT mage Transport System) format is de
COMMENT s', volume 376, page 359; bibcode: 200
COMMENT age Transport System) format is d
COMMENT ', volume 376, page 359; bibcode: 20
TELESCOP= 'ESO-VLT-U2' / MIDAS desc.: TELESCOP(1)
INSTRUME= 'XSHOOTER' / MIDAS desc.: INSTRUME(1)
RADECSYS= 'FK5 ' / MIDAS desc.: RADECSYS(1)
OBSERVER= 'UNKNOWN ' / MIDAS desc.: OBSERVER(1)
IRAF-TLM= '2012-06-18T07:36:52' / Time of last modification
UTC = 25246. / 07:00:46.000 UTC at start
LST = 57980.786 / 16:06:20.786 LST at start
PI-COI = 'UNKNOWN ' / PI-COI name.
CHECKSUM= '7V5f9V5Z7V5d7V5Z' / HDU checksum updated 2012-04-18T07:06:37
DATASUM = '2491392345' / data unit checksum updated 2012-04-18T07:06:37
DATAMD5 = 'bd5d00b664a88f6b73994ddbbf834927' / MD5 checksum
PIPEFILE= 'SCI_SLIT_FLUX_MERGE1D_VIS.fits' / Filename of data product
APNUM1 = '1 1 '
DC-FLAG = 0
WCSDIM = 1
CD1_1 = 0.02
LTM1_1 = 1.
WAT0_001= 'system=equispec'
WAT1_001= 'wtype=linear label=Wavelength units=angstroms'
HIERARCH ESO OBS AIRM = 5. / Req. max. airmass
HIERARCH ESO OBS AMBI FWHM = 2. / Req. max. seeing
HIERARCH ESO OBS AMBI TRANS = '2CLR ' / Req. sky transparency
HIERARCH ESO OBS ATM = 'NATM ' / Req. Atmospheric Turbulence Model
HIERARCH ESO OBS CONTAINER ID = -999 / Scheduling container ID
HIERARCH ESO OBS CONTAINER TYPE= 'U ' / Scheduling container type
HIERARCH ESO OBS DID = 'ESO-VLT-DIC.OBS-1.12' / OBS Dictionary
HIERARCH ESO OBS EXECTIME = 1292 / Expected execution time
HIERARCH ESO OBS GRP = '0 ' / linked blocks
HIERARCH ESO OBS ID = 200230081 / Observation block ID
HIERARCH ESO OBS MOON DIST = 30 / Req. min. angular dist. from moon
HIERARCH ESO OBS MOON FLI = 1. / Req. max. fractional lunar illum.
HIERARCH ESO OBS NAME = 'Sz73 ' / OB name
HIERARCH ESO OBS OBSERVER = 'UNKNOWN ' / Observer Name
HIERARCH ESO OBS PI-COI ID = 0 / ESO internal PI-COI ID
HIERARCH ESO OBS PI-COI NAME = 'UNKNOWN ' / PI-COI name
HIERARCH ESO OBS PROG ID = '089.C-0143(A)' / ESO program identification
HIERARCH ESO OBS START = '2012-04-18T06:56:43' / OB start time
HIERARCH ESO OBS STREHLRATIO = 0. / Req. strehl ratio
HIERARCH ESO OBS TARG NAME = 'Sz73 ' / OB target name
HIERARCH ESO OBS TPLNO = 2 / Template number within OB
HIERARCH ESO OBS TWILIGHT = 0 / Req. twilight
HIERARCH ESO OBS WATERVAPOUR = 0. / Req. water vapour
HIERARCH ESO TPL DID = 'ESO-VLT-DIC.TPL-1.9' / Data dictionary for TPL
HIERARCH ESO TPL EXPNO = 2 / Exposure number within template
HIERARCH ESO TPL ID = 'XSHOOTER_slt_obs_AutoNodOnSlit' / Template signa
HIERARCH ESO TPL NAME = 'XSHOOTER observations with AutoNodOnSlit offset'
HIERARCH ESO TPL NEXP = 6 / Number of exposures within templat
HIERARCH ESO TPL PRESEQ= 'XSHOOTER_obs_AutoNodOnSlit.seq' / Sequencer scri
HIERARCH ESO TPL START = '2012-04-18T07:00:14' / TPL start time
HIERARCH ESO TPL VERSION = '$Revision: 213208 $' / Version of the template
HIERARCH ESO TEL AIRM END = 1.021 / Airmass at end
HIERARCH ESO TEL AIRM START = 1.02 / Airmass at start
HIERARCH ESO TEL ALT = 78.694 / Alt angle at start
HIERARCH ESO TEL AMBI FWHM END = 0.55 / Observatory Seeing queried from AS
HIERARCH ESO TEL AMBI FWHM START = 0.54 / Observatory Seeing queried
HIERARCH ESO TEL AMBI PRES END = 744.3 / Observatory ambient air pressure q
HIERARCH ESO TEL AMBI PRES START = 744.4 / Observatory ambient air pr
HIERARCH ESO TEL AMBI RHUM = 9. / Observatory ambient relative humid
HIERARCH ESO TEL AMBI TAU0 = 0.0051 / Average coherence time
HIERARCH ESO TEL AMBI TEMP = 13.3 / Observatory ambient temperature qu
HIERARCH ESO TEL AMBI WINDDIR = 343. / Observatory ambient wind direction
HIERARCH ESO TEL AMBI WINDSP = 7.15 / Observatory ambient wind speed que
HIERARCH ESO TEL AZ = 18.579 / Az angle at start S=0,W=90
HIERARCH ESO TEL CHOP ST = F / True when chopping is active
HIERARCH ESO TEL DATE = '2000-01-01T00:00:00' / TCS installation date
HIERARCH ESO TEL DID = 'ESO-VLT-DIC.TCS' / Data dictionary for TEL
HIERARCH ESO TEL DOME STATUS = 'FULLY-OPEN' / Dome status
HIERARCH ESO TEL FOCU ID = 'CA ' / Telescope focus station ID
HIERARCH ESO TEL FOCU LEN = 108.557 / Focal length
HIERARCH ESO TEL FOCU SCALE = 1.894 / Focal scale
HIERARCH ESO TEL FOCU VALUE = 0.555 / M2 setting
HIERARCH ESO TEL GEOELEV = 2648. / Elevation above sea level (m)
HIERARCH ESO TEL GEOLAT= -24.6272 / Tel geo latitute (+=North)
HIERARCH ESO TEL GEOLON= -70.4048 / Tel geo longitude (+=East)
HIERARCH ESO TEL IA FWHM = 0.57 / Delivered seeing corrected by airm
HIERARCH ESO TEL IA FWHMLIN = 0.67 / Delivered seeing on IA detector (l
HIERARCH ESO TEL IA FWHMLINOBS = 0.68 / Delivered seeing on IA detector (l
HIERARCH ESO TEL ID = 'v 4.4 ' / TCS version number
HIERARCH ESO TEL MOON DEC = 3.02166 / 03:01:17.9 DEC (J2000)
HIERARCH ESO TEL MOON RA = 354.646614 / 23:38:35.1 RA (J2000)
HIERARCH ESO TEL OPER = 'I, Condor' / Telescope Operator
HIERARCH ESO TEL PARANG END = 26.898 / Parallactic angle at end
HIERARCH ESO TEL PARANG START = 20.778 / Parallactic angle at start
HIERARCH ESO TEL TARG ALPHA = 154756.94 / Alpha coordinate for the target
HIERARCH ESO TEL TARG COORDTYPE= 'M ' / Coordinate type (M=mean A=apparen
HIERARCH ESO TEL TARG DELTA = -351434.76 / Delta coordinate for the target
HIERARCH ESO TEL TARG EPOCH = 2000. / Epoch
HIERARCH ESO TEL TARG EPOCHSYSTEM = 'J ' / Epoch system (default J=Ju
HIERARCH ESO TEL TARG EQUINOX = 2000. / Equinox
HIERARCH ESO TEL TARG PARALLAX = 0. / Parallax
HIERARCH ESO TEL TARG PMA = 0. / Proper Motion Alpha
HIERARCH ESO TEL TARG PMD = 0. / Proper motion Delta
HIERARCH ESO TEL TARG RADVEL = 0. / Radial velocity
HIERARCH ESO TEL TH M1 TEMP = 12.04 / M1 superficial temperature
HIERARCH ESO TEL TRAK STATUS = 'NORMAL ' / Tracking status
HIERARCH ESO INS ADC1 DEC = -351647.50821 / Telescope desclination [deg].
HIERARCH ESO INS ADC1 END = 167.332 / Position angle at end [deg].
HIERARCH ESO INS ADC1 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC1 RA = 154847.084064 / Telescope right ascension [deg]
HIERARCH ESO INS ADC2 DEC = -351647.50821 / Telescope desclination [deg].
HIERARCH ESO INS ADC2 END = 183.88 / Position angle at end [deg].
HIERARCH ESO INS ADC2 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC2 RA = 154847.084064 / Telescope right ascension [deg]
HIERARCH ESO INS ADC3 DEC = -351647.50821 / Telescope desclination [deg].
HIERARCH ESO INS ADC3 ENCSTART = 34610 / ADC encoder value at exposure star
HIERARCH ESO INS ADC3 END = 165.806 / Position angle at end [deg].
HIERARCH ESO INS ADC3 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC3 RA = 154847.084064 / Telescope right ascension [deg]
HIERARCH ESO INS ADC4 DEC = -351647.50821 / Telescope desclination [deg].
HIERARCH ESO INS ADC4 ENCSTART = 36000 / ADC encoder value at exposure star
HIERARCH ESO INS ADC4 END = 173.893 / Position angle at end [deg].
HIERARCH ESO INS ADC4 MODE = 'AUTO ' / ADC mode.
HIERARCH ESO INS ADC4 RA = 154847.084064 / Telescope right ascension [deg]
HIERARCH ESO INS DATE = '2005-04-01' / Instrument release date (yyyy-mm-d
HIERARCH ESO INS DID = 'ESO-VLT-DIC.XSHOOTER_ICS-0.78' / Data dictionary
HIERARCH ESO INS FILT1 ID = 'PS11 ' / Filter unique id.
HIERARCH ESO INS FILT1 NAME = 'I ' / Filter name.
HIERARCH ESO INS FILT1 NO = 11 / Filter wheel position index.
HIERARCH ESO INS FOCU1 ENC = 26884 / Absolute position [Enc].
HIERARCH ESO INS FOCU1 POS = 13.7 / Position [C].
HIERARCH ESO INS FOCU2 ENC = 11750 / Absolute position [Enc].
HIERARCH ESO INS FOCU2 POS = 0. / Position [C].
HIERARCH ESO INS ID = 'XSHOOTER/1.60' / Instrument ID.
HIERARCH ESO INS MIRR1 ID = 'Tel ' / Mirror unique ID.
HIERARCH ESO INS MIRR1 NAME = 'Tel ' / Mirror name.
HIERARCH ESO INS MIRR1 NO = 1 / Mirror slide position.
HIERARCH ESO INS MODE = 'SLITSPEC' / Instrument mode used.
HIERARCH ESO INS OPTI2 ID = 'SLOT ' / OPTIi unique ID.
HIERARCH ESO INS OPTI2 NAME = 'SLOT ' / OPTIi name.
HIERARCH ESO INS OPTI2 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI2 TYPE = 'MIRROR ' / OPTIi element.
HIERARCH ESO INS OPTI3 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI3 NAME = '1.0x11 ' / OPTIi name.
HIERARCH ESO INS OPTI3 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI3 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI4 ID = 'PS7 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI4 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI4 NO = 7 / OPTIi slot number.
HIERARCH ESO INS OPTI4 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS OPTI5 ID = 'PS3 ' / OPTIi unique ID.
HIERARCH ESO INS OPTI5 NAME = '0.9x11 ' / OPTIi name.
HIERARCH ESO INS OPTI5 NO = 3 / OPTIi slot number.
HIERARCH ESO INS OPTI5 TYPE = 'SLIT ' / OPTIi element.
HIERARCH ESO INS PATH = 'SLITSPEC' / Optical path used.
HIERARCH ESO INS SENS21 ID = 'CA1F1 ' / sensor ID.
HIERARCH ESO INS SENS21 NAME = 'Cab.1 Flow rate' / sensor common name.
HIERARCH ESO INS SENS21 VAL = 62. / Cab. 1 Flow rate [l/h]
HIERARCH ESO INS SENS60 ID = 'NPM ' / sensor ID.
HIERARCH ESO INS SENS60 NAME = 'NIR cryo. P' / sensor common name.
HIERARCH ESO INS SENS60 VAL = 0.000116 / NIR Pressure [mbar]
HIERARCH ESO INS SENS81 ID = 'RANGE ' / sensor ID.
HIERARCH ESO INS SENS81 NAME = 'Heater Range' / sensor common name.
HIERARCH ESO INS SENS81 VAL = 4. / Lake 340 Heater Range
HIERARCH ESO INS SENS82 ID = 'HEATR ' / sensor ID.
HIERARCH ESO INS SENS82 NAME = 'Heater output' / sensor common name.
HIERARCH ESO INS SENS82 VAL = 47.5 / Lake 340 Heater output
HIERARCH ESO INS SHUT1 ID = 'INSH ' / Shutter ID.
HIERARCH ESO INS SHUT1 NAME = 'Instrument shutter' / Shutter name.
HIERARCH ESO INS SHUT1 ST = T / Shutter open.
HIERARCH ESO INS SWSIM = 'NORMAL ' / Software simulation.
HIERARCH ESO INS TEMP1 ID = 'TMUC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP1 NAME = 'UVB Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP1 VAL = 13.83 / UVB Camera temp. [C]
HIERARCH ESO INS TEMP10 ID = 'TMA ' / Temperature sensor ID.
HIERARCH ESO INS TEMP10 NAME = 'Ambient temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP10 VAL = 13.91 / Ambient temp. [C]
HIERARCH ESO INS TEMP11 ID = 'TMADC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP11 NAME = 'BB UVB ADC temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP11 VAL = 15.97 / BB UVB ADC temp. [C]
HIERARCH ESO INS TEMP2 ID = 'TMUP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP2 NAME = 'UVB Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP2 VAL = 13.4 / UVB Prism temp. [C]
HIERARCH ESO INS TEMP21 ID = 'CA1OT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP21 NAME = 'Cab.1 outlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP21 VAL = 11.74 / Cab. 1 outlet temp. [C]
HIERARCH ESO INS TEMP22 ID = 'CA1IT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP22 NAME = 'Cab.1 inlet temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP22 VAL = 8.73 / Cab. 1 inlet temp. [C]
HIERARCH ESO INS TEMP23 ID = 'CA1CT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP23 NAME = 'Cab.1 temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP23 VAL = 16.07 / Cab. 1 temp. [C]
HIERARCH ESO INS TEMP24 ID = 'CA1AT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP24 NAME = 'Cab.1 Amb. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP24 VAL = 13.82 / Cab. 1 Amb. temp. [C]
HIERARCH ESO INS TEMP3 ID = 'TMUB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP3 NAME = 'UVB bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP3 VAL = 13.74 / UVB bench temp. [C]
HIERARCH ESO INS TEMP4 ID = 'TMVC ' / Temperature sensor ID.
HIERARCH ESO INS TEMP4 NAME = 'VIS Camera temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP4 VAL = 12.76 / VIS Camera temp. [C]
HIERARCH ESO INS TEMP5 ID = 'TMVP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP5 NAME = 'VIS Prism temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP5 VAL = 13.19 / VIS Prism temp. [C]
HIERARCH ESO INS TEMP6 ID = 'TMVB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP6 NAME = 'VIS bench temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP6 VAL = 13.36 / VIS bench temp. [C]
HIERARCH ESO INS TEMP7 ID = 'TMUCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP7 NAME = 'UVB cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP7 VAL = 8.74 / UVB cryo. temp. [C]
HIERARCH ESO INS TEMP8 ID = 'TMVCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP8 NAME = 'VIS cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP8 VAL = 12.84 / VIS cryo. temp. [C]
HIERARCH ESO INS TEMP80 ID = 'OBCT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP80 NAME = 'OB Cover Tel.' / Temperature sensor name.
HIERARCH ESO INS TEMP80 VAL = 103.95 / OB Cover Telescope [K]
HIERARCH ESO INS TEMP81 ID = 'OBCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP81 NAME = 'OB Cover Tank' / Temperature sensor name.
HIERARCH ESO INS TEMP81 VAL = 104.04 / OB Cover Tank [K]
HIERARCH ESO INS TEMP82 ID = 'OBPR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP82 NAME = 'OB Prism1' / Temperature sensor name.
HIERARCH ESO INS TEMP82 VAL = 103.33 / OB Prism1 [K]
HIERARCH ESO INS TEMP83 ID = 'OBCL ' / Temperature sensor ID.
HIERARCH ESO INS TEMP83 NAME = 'OB Corrector Lens' / Temperature sensor name.
HIERARCH ESO INS TEMP83 VAL = 104.13 / OB Corrector Lens [K]
HIERARCH ESO INS TEMP84 ID = 'CP ' / Temperature sensor ID.
HIERARCH ESO INS TEMP84 NAME = 'Cryo. Cold Plate' / Temperature sensor name.
HIERARCH ESO INS TEMP84 VAL = 86.964 / Cryostat Cold Plate [K]
HIERARCH ESO INS TEMP85 ID = 'RS ' / Temperature sensor ID.
HIERARCH ESO INS TEMP85 NAME = 'Cryo. rad. shield' / Temperature sensor name.
HIERARCH ESO INS TEMP85 VAL = 101.98 / Cryostat rad. shield [K]
HIERARCH ESO INS TEMP86 ID = 'DCB ' / Temperature sensor ID.
HIERARCH ESO INS TEMP86 NAME = 'CCD Copper bar' / Temperature sensor name.
HIERARCH ESO INS TEMP86 VAL = 76.783 / CCD Copper bar [K]
HIERARCH ESO INS TEMP9 ID = 'TMNCR ' / Temperature sensor ID.
HIERARCH ESO INS TEMP9 NAME = 'NIR cryo. temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP9 VAL = 14.51 / NIR cryo. temp. [C]
HIERARCH ESO INS TEMP90 ID = 'NHT ' / Temperature sensor ID.
HIERARCH ESO INS TEMP90 NAME = 'NIR Head temp.' / Temperature sensor name.
HIERARCH ESO INS TEMP90 VAL = 78.999 / NIR Head temp. [K]
HIERARCH ESO INS TILT1 AFCX = 0.387 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT1 AFCY = -0.426 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT1 CONVX = 0.208 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT1 CONVY = 0.269 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT1 ENGX = 5.443 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT1 ENGY = 4.267 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT1 ID = 'afcs1 ' / AFCS ID.
HIERARCH ESO INS TILT1 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT1 NAME = 'Flexure comp. UVB' / AFCS description.
HIERARCH ESO INS TILT1 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT1 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT1 POSXEND = 0.441 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSXSTART = 0.396 / Piezo position at start in
HIERARCH ESO INS TILT1 POSYEND = -0.736 / Piezo position at end [volt].
HIERARCH ESO INS TILT1 POSYSTART = -0.725 / Piezo position at start in
HIERARCH ESO INS TILT1 REFRACXEND = 1.055 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT1 REFRACXST = 0.864 / Atm. refr. corr. start in
HIERARCH ESO INS TILT1 REFRACYEND = -1.417 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT1 REFRACYST = -1.411 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 AFCX = -0.535 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT2 AFCY = 0.132 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT2 CONVX = 0.291 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT2 CONVY = 0.384 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT2 ENGX = 4.424 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT2 ENGY = 5.403 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT2 ID = 'afcs2 ' / AFCS ID.
HIERARCH ESO INS TILT2 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT2 NAME = 'Flexure comp. VIS' / AFCS description.
HIERARCH ESO INS TILT2 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT2 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT2 POSXEND = -0.579 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSXSTART = -0.542 / Piezo position at start in
HIERARCH ESO INS TILT2 POSYEND = 0.404 / Piezo position at end [volt].
HIERARCH ESO INS TILT2 POSYSTART = 0.395 / Piezo position at start in
HIERARCH ESO INS TILT2 REFRACXEND = -1.1 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT2 REFRACXST = -0.884 / Atm. refr. corr. start in
HIERARCH ESO INS TILT2 REFRACYEND = 1.459 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT2 REFRACYST = 1.452 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 AFCX = -0.072 / Flexure corr. in X [volt].
HIERARCH ESO INS TILT3 AFCY = -0.003 / Flexure corr. in Y [volt].
HIERARCH ESO INS TILT3 CONVX = 0.58 / VoltToMarcsec conversion in X.
HIERARCH ESO INS TILT3 CONVY = 0.56 / VoltToMarcsec conversion in Y.
HIERARCH ESO INS TILT3 ENGX = 5.272 / Piezo voltage at end in X [volt].
HIERARCH ESO INS TILT3 ENGY = 5.056 / Piezo voltage at end in Y [volt].
HIERARCH ESO INS TILT3 ID = 'afcs3 ' / AFCS ID.
HIERARCH ESO INS TILT3 MODE = 'AUTO ' / AFCS mode.
HIERARCH ESO INS TILT3 NAME = 'Flexure comp. NIR' / AFCS description.
HIERARCH ESO INS TILT3 OFFSETX = 5. / Offset voltage in X [volt].
HIERARCH ESO INS TILT3 OFFSETY = 5. / Offset voltage in Y [volt].
HIERARCH ESO INS TILT3 POSXEND = 0.268 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSXSTART = 0.257 / Piezo position at start in
HIERARCH ESO INS TILT3 POSYEND = 0.044 / Piezo position at end [volt].
HIERARCH ESO INS TILT3 POSYSTART = 0.004 / Piezo position at start in
HIERARCH ESO INS TILT3 REFRACXEND = -1.215 / Atm. refr. corr. end in X
HIERARCH ESO INS TILT3 REFRACXST = -0.943 / Atm. refr. corr. start in
HIERARCH ESO INS TILT3 REFRACYEND = 1.574 / Atm. refr. corr. end in Y
HIERARCH ESO INS TILT3 REFRACYST = 1.567 / Atm. refr. corr. start in
HIERARCH ESO DET BITS = 16 / Bits per pixel readout
HIERARCH ESO DET CHIP1 DATE = '2005-04-22' / Date of installation [YYYY-MM-DD
HIERARCH ESO DET CHIP1 ID = 'Catherine' / Detector chip identification
HIERARCH ESO DET CHIP1 INDEX = 1 / Chip index
HIERARCH ESO DET CHIP1 NAME = 'MIT/LL CCID-20' / Detector chip name
HIERARCH ESO DET CHIP1 NX = 2048 / # of pixels along X
HIERARCH ESO DET CHIP1 NY = 4102 / # of pixels along Y
HIERARCH ESO DET CHIP1 PSZX = 15. / Size of pixel in X
HIERARCH ESO DET CHIP1 PSZY = 15. / Size of pixel in Y
HIERARCH ESO DET CHIP1 X = 1 / X location in array
HIERARCH ESO DET CHIP1 XGAP = 0. / Gap between chips along x
HIERARCH ESO DET CHIP1 Y = 1 / Y location in array
HIERARCH ESO DET CHIP1 YGAP = 0. / Gap between chips along y
HIERARCH ESO DET CHIPS = 1 / # of chips in detector array
HIERARCH ESO DET DATE = '2005-22-04' / Installation date
HIERARCH ESO DET DEC = 0. / Apparent 00:00:00.0 DEC at start
HIERARCH ESO DET DID = 'ESO-VLT-DIC.CCDDCS,ESO-VLT-DIC.FCDDCS' / Diction
HIERARCH ESO DET EXP NO= 991 / Unique exposure ID number
HIERARCH ESO DET EXP RDTTIME = 89.084 / image readout time
HIERARCH ESO DET EXP TYPE = 'Normal ' / Exposure type
HIERARCH ESO DET EXP XFERTIM = 89.125 / image transfer time
HIERARCH ESO DET FRAM ID = 1 / Image sequencial number
HIERARCH ESO DET FRAM TYPE = 'Normal ' / Type of frame
HIERARCH ESO DET ID = 'CCD FIERA - Rev: 3.108' / Detector system Id
HIERARCH ESO DET NAME = 'shdetv - shdetv' / Name of detector system
HIERARCH ESO DET OUT1 CHIP = 1 / Chip to which the output belongs
HIERARCH ESO DET OUT1 CONAD = 0.6 / Conversion from ADUs to electrons
HIERARCH ESO DET OUT1 GAIN = 1.67 / Conversion from electrons to ADU
HIERARCH ESO DET OUT1 ID = 'A ' / Output ID as from manufacturer
HIERARCH ESO DET OUT1 INDEX = 1 / Output index
HIERARCH ESO DET OUT1 NAME = 'A ' / Description of output
HIERARCH ESO DET OUT1 NX = 2048 / valid pixels along X
HIERARCH ESO DET OUT1 NY = 4000 / valid pixels along Y
HIERARCH ESO DET OUT1 OVSCX = 48 / Overscan region in X
HIERARCH ESO DET OUT1 OVSCY = 0 / Overscan region in Y
HIERARCH ESO DET OUT1 PRSCX = 10 / Prescan region in X
HIERARCH ESO DET OUT1 PRSCY = 0 / Prescan region in Y
HIERARCH ESO DET OUT1 RON = 3.2 / Readout noise per output (e-)
HIERARCH ESO DET OUT1 X= 1 / X location of output
HIERARCH ESO DET OUT1 Y= 1 / Y location of output
HIERARCH ESO DET OUTPUTS = 1 / # of outputs
HIERARCH ESO DET OUTREF= 0 / reference output
HIERARCH ESO DET RA = 0. / Apparent 00:00:00.0 RA at start
HIERARCH ESO DET READ CLOCK = '100k/1pt/hg' / Readout clock pattern used
HIERARCH ESO DET READ MODE = 'normal ' / Readout method
HIERARCH ESO DET READ NFRAM = 1 / Number of readouts buffered in sin
HIERARCH ESO DET READ SPEED = '1pt/100k/hg' / Readout speed
HIERARCH ESO DET SHUT ID = 'VA 25mm BistableCCD Sensor1' / Shutter unique
HIERARCH ESO DET SHUT TMCLOS = 0. / Time taken to close shutter
HIERARCH ESO DET SHUT TMOPEN = 0. / Time taken to open shutter
HIERARCH ESO DET SHUT TYPE = 'Iris on Slit' / type of shutter
HIERARCH ESO DET SOFW MODE = 'Normal ' / CCD sw operational mode
HIERARCH ESO DET TELE INT = 600. / Interval between two successive te
HIERARCH ESO DET TELE NO = 4 / # of sources active
HIERARCH ESO DET TLM1 END = 135. / Telemetry value at read completion
HIERARCH ESO DET TLM1 ID = 'CCD Sensor1' / ID of telemetry sensor
HIERARCH ESO DET TLM1 NAME = 'CCD T1 ' / Description of telemetry param.
HIERARCH ESO DET TLM1 START = 135. / Telemetry value at read start
HIERARCH ESO DET TLM2 END = 142.6 / Telemetry value at read completion
HIERARCH ESO DET TLM2 ID = 'CCD Sensor2' / ID of telemetry sensor
HIERARCH ESO DET TLM2 NAME = 'CCD T2 ' / Description of telemetry param.
HIERARCH ESO DET TLM2 START = 142.6 / Telemetry value at read start
HIERARCH ESO DET TLM3 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM3 ID = 'Box Temp' / ID of telemetry sensor
HIERARCH ESO DET TLM3 NAME = 'EBOX T ' / Description of telemetry param.
HIERARCH ESO DET TLM3 START = 0. / Telemetry value at read start
HIERARCH ESO DET TLM4 END = 0. / Telemetry value at read completion
HIERARCH ESO DET TLM4 ID = 'Vacuum ' / ID of telemetry sensor
HIERARCH ESO DET TLM4 NAME = 'Vacuum ' / Description of telemetry param.
HIERARCH ESO DET TLM4 START = 0. / Telemetry value at read start
HIERARCH ESO DET WIN1 BINX = 1 / Binning factor along X
HIERARCH ESO DET WIN1 BINY = 1 / Binning factor along Y
HIERARCH ESO DET WIN1 DIT1 = 250.000002 / actual subintegration time
HIERARCH ESO DET WIN1 DKTM = 250.37 / Dark current time
HIERARCH ESO DET WIN1 NDIT = 1 / # of subintegrations
HIERARCH ESO DET WIN1 NX = 2106 / # of pixels along X
HIERARCH ESO DET WIN1 NY = 4000 / # of pixels along Y
HIERARCH ESO DET WIN1 ST = T / If T, window enabled
HIERARCH ESO DET WIN1 STRX = 1 / Lower left pixel in X
HIERARCH ESO DET WIN1 STRY = 1 / Lower left pixel in Y
HIERARCH ESO DET WIN1 UIT1 = 250. / user defined subintegration time
HIERARCH ESO DET WINDOWS = 1 / # of windows readout
HIERARCH ESO PRO CATG = 'SCI_SLIT_FLUX_MERGE1D_VIS' / Category of pipeline prod
HIERARCH ESO PRO DATANCOM = 1
HIERARCH ESO PRO B RELOFF RA = -1.61826
HIERARCH ESO PRO B RELOFF DEC = -4.730881
HIERARCH ESO PRO B CUMOFF RA = -0.80913
HIERARCH ESO PRO B CUMOFF DEC = -2.365441
HIERARCH ESO PRO RECT BIN LAMBDA = 0.02
HIERARCH ESO PRO RECT BIN SPACE= 0.16
HIERARCH ESO PRO RECT LAMBDA MIN = 533.66
HIERARCH ESO PRO RECT LAMBDA MAX = 1019.98
HIERARCH ESO PRO RECT SPACE MIN= -10.2600002289
HIERARCH ESO PRO RECT SPACE MAX= 5.41999959946
HIERARCH ESO PRO EXTRACT SLIT MIN = 0.
HIERARCH ESO PRO EXTRACT SLIT MAX = 0.
HIERARCH ESO PRO DID = 'PRO-1.15' / Data dictionary for PRO
HIERARCH ESO PRO TYPE = 'REDUCED ' / Product type
HIERARCH ESO PRO TECH = 'ECHELLE,SLIT,NODDING' / Observation technique
HIERARCH ESO PRO SCIENCE = T / Scientific product if T
HIERARCH ESO PRO REC1 ID = 'xsh_scired_slit_nod' / Pipeline recipe (unique
HIERARCH ESO PRO REC1 DRS ID = 'cpl-5.3.1' / Data Reduction System identifier
HIERARCH ESO PRO REC1 PIPE ID = 'xsh/1.3.7' / Pipeline (unique) identifier
HIERARCH ESO PRO REC1 RAW1 NAME= 'XSHOO.2012-04-18T07:00:50.838.fits' / File na
HIERARCH ESO PRO REC1 RAW1 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 RAW2 NAME= 'XSHOO.2012-04-18T07:07:57.804.fits' / File na
HIERARCH ESO PRO REC1 RAW2 CATG= 'OBJECT_SLIT_NOD_VIS' / Category of raw frame
HIERARCH ESO PRO REC1 CAL1 NAME= 'SPECTRAL_FORMAT_TAB_VIS.fits' / File name of
HIERARCH ESO PRO REC1 CAL1 CATG= 'SPECTRAL_FORMAT_TAB_VIS' / Category of calibr
HIERARCH ESO PRO REC1 CAL1 DATAMD5 = '9b447dab81b23bf0fbccda78f6fdc79d' / MD
HIERARCH ESO PRO REC1 CAL2 NAME= 'MASTER_BIAS_VIS_100k.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL2 CATG= 'MASTER_BIAS_VIS' / Category of calibration fr
HIERARCH ESO PRO REC1 CAL2 DATAMD5 = '2dd04bace4ae311682f7e30ee4532f89' / MD
HIERARCH ESO PRO REC1 CAL3 NAME= 'ORDER_TAB_EDGES_SLIT_VIS.fits' / File name of
HIERARCH ESO PRO REC1 CAL3 CATG= 'ORDER_TAB_EDGES_SLIT_VIS' / Category of calib
HIERARCH ESO PRO REC1 CAL3 DATAMD5 = 'e7e9817af1b8717d0c6068d7d1e0179b' / MD
HIERARCH ESO PRO REC1 CAL4 NAME= 'MASTER_FLAT_SLIT_VIS.fits' / File name of cal
HIERARCH ESO PRO REC1 CAL4 CATG= 'MASTER_FLAT_SLIT_VIS' / Category of calibrati
HIERARCH ESO PRO REC1 CAL4 DATAMD5 = 'e2daa0eb5e4348cfa20ef47f8a767994' / MD
HIERARCH ESO PRO REC1 CAL5 NAME= 'BP_MAP_RP_VIS_REF_1x1.fits' / File name of ca
HIERARCH ESO PRO REC1 CAL5 CATG= 'MASTER_BP_MAP_VIS' / Category of calibration
HIERARCH ESO PRO REC1 CAL5 DATAMD5 = 'f6743ea948006ad37d5bc7470b1f8242' / MD
HIERARCH ESO PRO REC1 CAL6 NAME= 'DISP_TAB_AFC_VIS.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL6 CATG= 'DISP_TAB_AFC_VIS' / Category of calibration f
HIERARCH ESO PRO REC1 CAL6 DATAMD5 = 'fa34c6c6f021f30a7edd00537b3e49fc' / MD
HIERARCH ESO PRO REC1 CAL7 NAME= 'WAVE_TAB_AFC_VIS.fits' / File name of calibra
HIERARCH ESO PRO REC1 CAL7 CATG= 'WAVE_TAB_AFC_VIS' / Category of calibration f
HIERARCH ESO PRO REC1 CAL7 DATAMD5 = '4707fce784ed00f6f00ea41ed3fa9ef0' / MD
HIERARCH ESO PRO REC1 CAL8 NAME= 'RESPONSE_MERGE1D_SLIT_VIS.fits' / File name o
HIERARCH ESO PRO REC1 CAL8 CATG= 'RESPONSE_MERGE1D_SLIT_VIS' / Category of cali
HIERARCH ESO PRO REC1 CAL8 DATAMD5 = 'e5b20bf633955b949b383772ab09b7b8' / MD
HIERARCH ESO PRO REC1 CAL9 NAME= 'xsh_paranal_extinct_vis.fits' / File name of
HIERARCH ESO PRO REC1 CAL9 CATG= 'ATMOS_EXT_VIS' / Category of calibration fram
HIERARCH ESO PRO REC1 CAL9 DATAMD5 = '6aea4595776baaa7efc244012254dd9c' / MD
HIERARCH ESO PRO REC1 PARAM1 NAME = 'keep-temp' / If 'no', temporary files
HIERARCH ESO PRO REC1 PARAM1 VALUE = 'no ' / Default: 'no'
HIERARCH ESO PRO REC1 PARAM2 NAME = 'debug-level' / Additional xshooter deb
HIERARCH ESO PRO REC1 PARAM2 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM3 NAME = 'test ' / Can be any string, usage d
HIERARCH ESO PRO REC1 PARAM3 VALUE = 'none ' / Default: 'none'
HIERARCH ESO PRO REC1 PARAM4 NAME = 'time-stamp' / Add timestamp to product
HIERARCH ESO PRO REC1 PARAM4 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM5 NAME = 'pre-overscan-corr' / pre-overscan corr
HIERARCH ESO PRO REC1 PARAM5 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM6 NAME = 'background-nb-y' / number of points of
HIERARCH ESO PRO REC1 PARAM6 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM7 NAME = 'background-radius-x' / half size of th
HIERARCH ESO PRO REC1 PARAM7 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM8 NAME = 'background-radius-y' / half size of th
HIERARCH ESO PRO REC1 PARAM8 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM9 NAME = 'background-min-grid-frac' / Minimum fr
HIERARCH ESO PRO REC1 PARAM9 VALUE = '0.3333 ' / Default: 0.3333
HIERARCH ESO PRO REC1 PARAM10 NAME = 'background-grid-frac' / maximum fracti
HIERARCH ESO PRO REC1 PARAM10 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM11 NAME = 'background-method' / method adopted fo
HIERARCH ESO PRO REC1 PARAM11 VALUE = 'poly ' / Default: 'poly'
HIERARCH ESO PRO REC1 PARAM12 NAME = 'background-smooth-x' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM12 VALUE = '-1 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM13 NAME = 'background-smooth-y' / Smoothing radiu
HIERARCH ESO PRO REC1 PARAM13 VALUE = '100 ' / Default: 100
HIERARCH ESO PRO REC1 PARAM14 NAME = 'background-debug' / Generate a table c
HIERARCH ESO PRO REC1 PARAM14 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM15 NAME = 'removecrhsingle-frac-max' / Max fracti
HIERARCH ESO PRO REC1 PARAM15 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM16 NAME = 'removecrhsingle-sigmalim' / Poisson fl
HIERARCH ESO PRO REC1 PARAM16 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM17 NAME = 'removecrhsingle-flim' / Minimum contra
HIERARCH ESO PRO REC1 PARAM17 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM18 NAME = 'removecrhsingle-niter' / Max number of
HIERARCH ESO PRO REC1 PARAM18 VALUE = '4 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM19 NAME = 'rectify-kernel' / Name of the Interpol
HIERARCH ESO PRO REC1 PARAM19 VALUE = 'default ' / Default: 'default'
HIERARCH ESO PRO REC1 PARAM20 NAME = 'rectify-radius' / Rectify Interpolatio
HIERARCH ESO PRO REC1 PARAM20 VALUE = '1 ' / Default: 4
HIERARCH ESO PRO REC1 PARAM21 NAME = 'rectify-bin-lambda' / Wavelength step
HIERARCH ESO PRO REC1 PARAM21 VALUE = '0.02 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM22 NAME = 'rectify-bin-slit' / Spatial step along
HIERARCH ESO PRO REC1 PARAM22 VALUE = '0.16 ' / Default: -1
HIERARCH ESO PRO REC1 PARAM23 NAME = 'rectify-full-slit' / Use full slit if
HIERARCH ESO PRO REC1 PARAM23 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM24 NAME = 'rectify-conserve-flux' / Use flux cons
HIERARCH ESO PRO REC1 PARAM24 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM25 NAME = 'rectify-fast' / Fast if TRUE (Rect[B-A
HIERARCH ESO PRO REC1 PARAM25 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM26 NAME = 'localize-method' / Localization method
HIERARCH ESO PRO REC1 PARAM26 VALUE = 'GAUSSIAN' / Default: 'GAUSSIAN'
HIERARCH ESO PRO REC1 PARAM27 NAME = 'localize-chunk-nb' / Number of chunks
HIERARCH ESO PRO REC1 PARAM27 VALUE = '10 ' / Default: 10
HIERARCH ESO PRO REC1 PARAM28 NAME = 'localize-thresh' / Threshold relative
HIERARCH ESO PRO REC1 PARAM28 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM29 NAME = 'localize-deg-lambda' / Degree in lambd
HIERARCH ESO PRO REC1 PARAM29 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM30 NAME = 'localize-slit-position' / Object posit
HIERARCH ESO PRO REC1 PARAM30 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM31 NAME = 'localize-slit-hheight' / Object half h
HIERARCH ESO PRO REC1 PARAM31 VALUE = '0.5 ' / Default: 0.5
HIERARCH ESO PRO REC1 PARAM32 NAME = 'localize-kappa' / Kappa value for sigm
HIERARCH ESO PRO REC1 PARAM32 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM33 NAME = 'localize-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM33 VALUE = '3 ' / Default: 3
HIERARCH ESO PRO REC1 PARAM34 NAME = 'localize-use-skymask' / TRUE if we wan
HIERARCH ESO PRO REC1 PARAM34 VALUE = 'false ' / Default: false
HIERARCH ESO PRO REC1 PARAM35 NAME = 'localize-nod-throw' / Step (arcsec) be
HIERARCH ESO PRO REC1 PARAM35 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM36 NAME = 'extract-method' / Method used for extr
HIERARCH ESO PRO REC1 PARAM36 VALUE = 'NOD ' / Default: 'NOD'
HIERARCH ESO PRO REC1 PARAM37 NAME = 'mergeord-method' / Method for combinin
HIERARCH ESO PRO REC1 PARAM37 VALUE = '0 ' / Default: 0
HIERARCH ESO PRO REC1 PARAM38 NAME = 'combinenod-min' / minimum NS size of r
HIERARCH ESO PRO REC1 PARAM38 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM39 NAME = 'combinenod-clip' / TRUE if do sigma cl
HIERARCH ESO PRO REC1 PARAM39 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM40 NAME = 'combinenod-clip-sigma' / Kappa value i
HIERARCH ESO PRO REC1 PARAM40 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM41 NAME = 'combinenod-clip-niter' / Number of ite
HIERARCH ESO PRO REC1 PARAM41 VALUE = '2 ' / Default: 2
HIERARCH ESO PRO REC1 PARAM42 NAME = 'combinenod-clip-diff' / Minimal change
HIERARCH ESO PRO REC1 PARAM42 VALUE = '0.1 ' / Default: 0.1
HIERARCH ESO PRO REC1 PARAM43 NAME = 'combinenod-throwlist' / Name of ascii
HIERARCH ESO PRO REC1 PARAM43 VALUE = 'throwlist.asc' / Default: 'throwlist.a
HIERARCH ESO PRO REC1 PARAM44 NAME = 'combinenod-method' / Combination metho
HIERARCH ESO PRO REC1 PARAM44 VALUE = 'MEAN ' / Default: 'MEAN'
HIERARCH ESO PRO REC1 PARAM45 NAME = 'max-slit' / Lower Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM45 VALUE = '5.7 ' / Default: 5.7
HIERARCH ESO PRO REC1 PARAM46 NAME = 'min-slit' / Upper Slit Limit (localize
HIERARCH ESO PRO REC1 PARAM46 VALUE = '-5.3 ' / Default: -5.3
HIERARCH ESO PRO REC1 PARAM47 NAME = 'crh-clip-kappa' / Kappa value in sigma
HIERARCH ESO PRO REC1 PARAM47 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM48 NAME = 'crh-clip-niter' / Number of iterations
HIERARCH ESO PRO REC1 PARAM48 VALUE = '5 ' / Default: 5
HIERARCH ESO PRO REC1 PARAM49 NAME = 'crh-clip-frac' / Minimal ratio of poin
HIERARCH ESO PRO REC1 PARAM49 VALUE = '0.7 ' / Default: 0.7
HIERARCH ESO PRO REC1 PARAM50 NAME = 'compute-map' / if TRUE recompute (wave
HIERARCH ESO PRO REC1 PARAM50 VALUE = 'true ' / Default: true
HIERARCH ESO PRO REC1 PARAM51 NAME = 'do-flatfield' / TRUE if we do the flat
HIERARCH ESO PRO REC1 PARAM51 VALUE = 'true ' / Default: true
HIERARCH ESO ADA ABSROT END = 175.39939 / Abs rot angle at exp end
HIERARCH ESO ADA ABSROT PPOS = 'NEG ' / sign of probe position
HIERARCH ESO ADA ABSROT START = 169.25503 / Abs rot angle at exp start
HIERARCH ESO ADA GUID DEC = -35.1631 / -35:09:47.1 Guide star DEC J2000
HIERARCH ESO ADA GUID RA = 237.027995 / 15:48:06.7 Guide star RA J2000
HIERARCH ESO ADA GUID STATUS = 'ON ' / Status of autoguider
HIERARCH ESO ADA POSANG= -18.88393 / Position angle at start
HIERARCH ESO OCS DET2 IMGNAME = 'XSHOOTER_SLT_OBJ_VIS_' / Data File Name.
HIERARCH ESO SEQ ARM = 'VIS ' / Instrument Arm
HIERARCH ESO SEQ CUMOFF DEC = 2.365441 / Cumulative DEC offset
HIERARCH ESO SEQ CUMOFF RA = 0.80913 / Cumulative RA offset
HIERARCH ESO SEQ CUMOFF X = 0. / Cumulative offset X (along the sli
HIERARCH ESO SEQ CUMOFF Y = 2.5 / Cumulative offset Y (along the sli
HIERARCH ESO SEQ JITTER WIDTH = 0. / Width of the Jitter box (arcsec)
HIERARCH ESO SEQ NOD THROW = 5. / Nodding throw length in arcsec
HIERARCH ESO SEQ RELOFF DEC = 2.365441 / List of DEC offsets
HIERARCH ESO SEQ RELOFF RA = 0.80913 / List of RA offsets
HIERARCH ESO QC NPIXSAT= 0. / Number of saturated pixels
HIERARCH ESO QC FPIXSAT= 0. / Fraction of saturated pixels
HIERARCH ESO QC CRRATE = 0.174913194444 / Number of detected cosmic ray hits
HIERARCH ESO QC NCRH AVG = 806 / Number of detected cosmic ray hits
HIERARCH ESO QC VRAD BARYCOR = 16.3683888969 / Barycentric radial velocity co
HIERARCH ESO QC VRAD HELICOR = 16.3666240646 / Heliocentric radial velocity c
.
HISTORY ESO-DESCRIPTORS START ................
HISTORY 'LHCUTS','R*4',1,4,'5E14.7'
HISTORY 0.0000000E+00 0.0000000E+00 1.1754944E-38 1.8541649E-10
HISTORY
HISTORY ESO-DESCRIPTORS END ................
.
END
END